Hansen SuperFlo Tank Float Valve
Supplied with Complete Plastic Valve Body, Long Brass Arm, 15mm Long Tail Adaptor and 650mm Cord and Nuts.
This valve is suitable both top or side entry applications - in the instance that you have a top entry, there is a hose barb connection that you can attach a diffuser hose to reduce water turbulence & noise, as well as Anti-Syphon holes to prevent back flow. The FastFlo valves have a small, compact design suited to confined spaces i.e. small feeder bowls, troughs and header tanks.
Hansen Fastflo Valve will operate from 0 to 12 Bar (0 to 174 psi) at 20 degrees C.
Maximum Working Pressure; 12 Bar (174 psi) at 20 degrees C.
Mini Float Valve
A small white float valve commonly used in animal drinking bowls.
1/2" BSP male thread inlet.
Float size: 95mm long, 50mm wide
Overall length: 240mm
Philmac EasyPhil Tank Float Valve
Manufactured with DZR Brass: Quality brass which is resistant to the loss of zinc which causes leakage.
The EasyPhil valves are approved to the AS/NZS 4020 standard which means that they can be used in applications that are required for drinking water (also known as potable water).
The body, plunger, back-nut and body cap are all manufactured from engineering grade thermoplastic. This provides a high level of wear, UV and corrosion resistance to ensure years of realiable service. The material is non-toxic and taint free.
Alike many other Philmac float valves, the brass lever and pin are manufactured with a corrosive resistant brass, known as DZR (dezincification resistant) brass.
Philmac MegaPhil Brass Float Valve
Manufactured with DZR Brass: Quality brass which is resistant to the loss of zinc which causes leakage.
HP/LP refers to High Pressure and Low Pressure Adaptor supplied (only with the 1 1/2" and 2" valves).
The MegaPhil valves have been designed to provide a wide range of flows. Even at 100kPa some versions can provide in excess of 3 litres per second.
OptiPHIL Float Valve
1” male BSP thread inlet. Includes 3/4” and 1 1/4” adaptors.
OptiPHIL Float Valves are full-flow float valves designed with Opti-Flo technology. They are a compact option to fill medium to large and high-demand troughs, tanks, reservoirs, and cisterns. They’re engineered to maximise water flow through the valve, maintaining good performance with dirty water and minimising issues such as blockages. Its patented Soft-Close design provides reliable shut-off and prevents damaging water-hammer. OptiPHIL float valves reduce turbulence and float bounce.
MADE IN AUSTRALIA
Maximum Flow Rate: 847 L/min @ 1200kPa
Working Pressure: 10 – 1200 kPa (1.5 – 175 PSI)
Static Shut-Off: 1200kPa
Suited for cold water applications (1° - 60° Celsius)
Product Brochure
Technical Manual
Youtube: Video Brochure
Youtube: Above-Water Installation
Youtube: Below-Water Installation
 |
TankPHIL Single, and Dual Lever Float Valves
Requires two 6" (150mm) floats sold seperately.
Dual level float valve suited for maintaining water levels in tanks, reservoirs, cisterns, commercial buildings, and industrial water applications. Must be installed horizontally and firmly mounted at least 100mm from inside of tank wall. Made of high-quality materials including brass with excellent UV, impact, and corrosion resistance.
MADE IN AUSTRALIA
Maximum Flow Rate: 855 L/min at 800kPa
Working Pressure: 0 – 800 kPa (116 PSI)
Suited for cold water applications (1° - 60° Celsius)
 |
Philmac UltraPhil Brass Float Valve
Manufactured with DZR Brass: Quality brass which is resistant to the loss of zinc which causes leakage.
The UltraPhil valve is desinged to have easy access to all parts for maintence, by simply removing the pivot pin, and body cap (where fitted).
Been a watermark approved valve rated to a pressure of 200 psi (1400 kPa) (static shut-off) - this is based on using the standard lever arm and reccomended float ball size.
Philmac VersaPhil Tank Float Valve
Requires a tank float sold separately (Philmac 6” float recommended).
25mm (1”) male BSPT inlet. Includes adaptor to 20mm (3/4”).
Suits troughs with capacity up to 1500 litres.
Cold water applications (1° - 60° Celsius).
A handy float valve that comes with an adaptor so it can be used with 20mm and 25mm connections. The brass lever and pin are made of corrosion-resistant brass (DZR dezincification resistant).
165mm Lever Specifications
Max flow: 390 lpm
Max shut-off pressure: 1100 kPa
300mm Lever Specifications
Max flow: 425 lpm
Max shut-off pressure: 1400 kPa
Product Specifications Sheet
Philmac Float Valve Product Range Brochure
Installation Guide
Spare Parts Catalogue
Youtube: How to install the Philmac VersaPHIL Tapered Thread Float Valve
The Galcon 9001BT Bluetooth Tap Timer is a single-station battery-operated irrigation controller for garden taps. It is suited to home gardens, drip irrigation, sprinkler systems, flower pots, roof gardens and garden beds where simple tap-mounted automatic watering is required.
This tap timer can be programmed directly at the controller or through the GalconBT app using Bluetooth. Bluetooth control is for nearby setup and operation from a compatible smartphone, not WiFi remote access from anywhere.
The 9001BT supports run times from 1 minute to 12 hours, with up to 4 start times per day. Watering can be set using 7 day programming or an interval from 1 to 30 days, giving flexibility for everyday garden watering, less frequent irrigation or simple seasonal schedules.
The timer operates from 1 x 9V alkaline battery and includes manual activation at the controller, rain off suspension, low battery indication and rain sensor shutdown compatibility. It is designed for cold water outdoor irrigation systems only.
2 Year Galcon Limited Warranty
Galcon 9001BT Blueooth Tap Timer User Manual
Galcon 9001BT Blueooth Tap Timer Specifications
Video 1
Tefen bush reducing fittings are used to adapt a larger female BSP threaded fitting, outlet or port down to a smaller female BSP threaded connection. They are suitable for small irrigation, dosing, pneumatic and compatible fluid handling systems where a compact male-to-female reducing adaptor is required.
Made from Nylon 6-6, these reducing bushes provide a Male BSPT thread on the outside and a Female BSPT thread internally. Use suitable thread tape or thread sealant during installation and avoid over-tightening plastic threaded fittings.
Tefen directors are used to connect small tube lines to male BSP threaded equipment, manifolds, valves or fittings. They are suitable for compatible tube systems including pneumatic, dosing, irrigation and general fluid handling applications where a tube connection needs to transition into a threaded port.
These fittings are part of the Tefen Barb Block range and are made from reinforced polypropylene. The tube is inserted fully into the fitting and the nut is tightened onto the support thread to secure the connection.
Tefen nipples are used to connect two female BSP threaded fittings, valves, manifolds or equipment connections. They are suitable for small irrigation, dosing, pneumatic and compatible fluid handling systems where a compact male-to-male threaded connector is required.
Made from Nylon 6-6, these fittings provide Male BSPT threaded connections on both ends. Use suitable thread tape or thread sealant during installation and avoid over-tightening plastic threaded fittings.
Tefen nipple reducing fittings are used to connect and adapt two different female BSP threaded fittings, valves, manifolds or equipment connections. They are suitable for small irrigation, dosing, pneumatic and compatible fluid handling systems where two different threaded sizes need to be joined.
Made from Nylon 6-6, these reducing nipples provide Male BSPT threaded connections on both ends in different sizes. Use suitable thread tape or thread sealant during installation and avoid over-tightening plastic threaded fittings.
Marking
1. Marking paint creates highly visible marks ideal for concrete, bitumen, steel and timber
2-4. Marking flags create survey marks buy digging to the ground a common use may be for marking out points after using a stringline or marking out sprinkler positions on grass
5. Plastic Flag with spring cord - ideal for warning sign of long pipe etc. on when driving
6. OX Marking Product Catalogue
Axe
This quality standard ING-CO Axe with Fibreglass handle weighs 800g with 390mm handle. With a drop-forged hammer head and heat treated carbon steel.
Wire / Cable Cutters and Strippers
High quality, heavy duty cutters to eliminate frayed ends. Designed for cutting specific wire and cables to suit a range of projects.
- A. ECLIPSE Wire Rope Cutter; 200mm (8"). Recommended capacity: Mild steel strands/Electric cable (6.5mm), High tensile steel rope/Soft steel wire/Copper & aluminium rod (5mm), Steel rod (4mm), Spring wire (2.5mm). (EWC8)
- B. ING-CO Heavy Duty Cable Cutter; 250mm (10"). (HHCCB0210)
- C. HANGLONG Wire Cutter; Parrot Beak 70mm.
- D. REPELEC (AUST) Wire Cutter; Parrot Beak 60mm, Heavy Duty.
- E. ING-CO Wire Stripper; 0.5-6mm. (HWSP15608)
- F-H. OX Aviation Snips Product Catalogue
Gloves
Gloves provide protection for the hands for a vast range of activities including; manual handling, machine operation, and gardening.
A. The nitrile coated palms of the gloves provide a smooth and rough-textured grip, suitable for oil environments.
B. Leather gloves are a thick, wear-resistant style with comfortable cotton back, rubberised cuff, and half lining; these gloves are commonly used with machinery and gardening.
C-F. OX Gloves Product Catalogue
Wrenches
These high quality, heavy duty industrial 1200mm pipe wrenches are used for turning pipes & fittings. The adjustable jaw allow it to lock in, with any forward pressure on the handle pulling the jaws tighter together. The angle of the teeth also help against slipping as they are angled so they dig into the pipe as it is turned. These pipe wrenches feature a carbon steel Jaw-drop with a body of ductile cast iron. Clamp size 110mm.
OX Wrenches Product Catalogue
Secateurs and Pruning Shears
Secateurs otherwise known as pruning shears are a type of scissors for use on plants. They are designed to be able to prune hard branches of trees and shrubs. The Comfort Cut Bypass Pruner has a cutting capacity of 19mm. The Bypass Pruner is a one piece secateur forged from carbon steel and features a comfortable TPR hand grip.
- A. POPE All Purpose Bypass Pruner; Comfortable rubber hand grip, Durable hardened steel blade, Easy-side locking latch for safe storage, cuts up to 19mm, use in pruning live stems and green bushes
- B. ING-CO Pruning Shears; Heat treated aluminium handle with soft TPR grip, 205mm (8"), Easy-side locking latch for safe storage, cuts up to 12mm
Screwdrivers
Screwdrivers are a tool for screwing and unscrewing screws. A typical simple screwdriver has a handle and a shaft, ending in a tip the user puts into the screw head before turning the handle.
- A. ING-CO Screwdriver 6pcs Set; Chrome Vanadium, Soft grip, Magnetic ends: (1) Flat 5.5x75mm, (2) 5.5x100mm, (3) 6.5x150mm and Phillips (4)2x6x150mm, (5) 1x5x100mm, (6) 1x5x75mm (HKSD0628)
- B. ING-CO Go-Through Screwdriver 2pcs Set; Metal base for hammer, Flat (1) 6.5x125mm and Phillips (2) 2x125mm (HSGT280208)
PVC Priming Fluid
PVC Priming Fluid Clear 500ml is a professional grade pipe preparation solution designed to clean, soften and prepare PVC pipe and fitting surfaces prior to solvent cement application. Proper priming improves joint strength by ensuring optimal chemical bonding between the pipe and fitting during installation.
This clear priming fluid is suitable for both pressure and non pressure PVC-U pipe systems and is commonly used in plumbing, irrigation, drainage and industrial pipework. The fast acting formulation removes surface contaminants such as grease, dirt and oxidation while softening the pipe surface to allow deeper solvent penetration.
Manufactured to Australian Standards, this priming fluid is an essential component for achieving strong, reliable and leak free PVC pipe joints.
Key Features
-
Cleans and prepares PVC pipe surfaces before cementing
-
Improves solvent weld joint strength and reliability
-
Clear formula for clean application appearance
-
Suitable for pressure and non pressure PVC systems
-
Fast acting surface preparation
-
Australian Standards compliant
-
Australian made
Applications
-
PVC pressure pipe installations
-
Irrigation systems
-
Plumbing pipework
-
Drainage systems
-
Electrical conduit preparation
-
Industrial piping
Specifications
-
Product Type: PVC Priming Fluid
-
Colour: Clear
-
Size: 500ml
-
Suitable Materials: PVC-U pipes and fittings
-
Standard Compliance: AS/NZS 3879
-
Country of Manufacture: Australia
E. OX Quick Start Handsaw
Saws
Pruning Saws are ideal for sawing through large branches. The curved blade pruning saws feature a curve in the blade, ideal for hooking onto hard to reach branches. Whille PVC pipe saws are a fast and precise way to cut PVC and other hard plastics. Unique teeth design will not shatter pipe, plumtool PVC Pipe Saw (B) comes with a deburrer specifically for PVC Pipe. The Spear and Jackson saw (C) has an ergonomic grip and finger guide for accuracy.
OX Saws Product Catalogue
Toro 570 Series nozzles are designed to deliver reliable, uniform water distribution for residential and commercial irrigation systems. Built with matched precipitation rate (MPR) technology, these nozzles ensure consistent coverage across different spray patterns and radii, helping prevent dry spots and overwatering.
Available in both fixed and adjustable arc options, Toro 570 nozzles provide flexibility for a wide range of landscape layouts including lawns, garden beds, shrubs, and specialty irrigation areas. Each nozzle includes a fine mesh filter screen to reduce clogging and maintain optimal performance over time.
The adjustable centre screw allows up to 25 percent radius reduction and complete shut off when required, giving installers precise control over watering zones. Colour coded identification makes selection simple during installation and maintenance.
Designed to suit Toro 570 sprinkler pop up bodies, shrub adapters, risers, and extensions, these nozzles offer an efficient upgrade or replacement solution for professional irrigation systems.
For detailed performance data and nozzle selection information, refer to the manufacturer specifications.
SPECIFICATIONS
- Series: Toro 570 Series
- Product Type: Spray Nozzles
- Arc Options: Fixed Arc and Adjustable Arc
- Radius Adjustment: Up to 25% reduction
- Shut Off Capability: Yes (centre screw)
- Compatibility: Toro 570 Spray Bodies, Shrub Adapters, Risers
- Filter: Integrated Fine Mesh Screen
- Material: Durable Polymer Construction
- Identification: Colour Coded
- Application Type: Residential and Commercial Irrigation
The Toro Precision™ Series Pressure Compensating Spray Nozzles are advanced high efficiency irrigation nozzles designed to deliver superior water distribution, reduced runoff, and improved irrigation uniformity compared to standard spray nozzles such as the Toro 570 series. Featuring integrated Pressure Compensating Device (PCD) technology and patented H²O Chip Technology, these nozzles maintain consistent performance across varying pressures while reducing water consumption and misting.
Unlike conventional spray nozzles, the Precision Series delivers a controlled precipitation rate of approximately 25mm per hour, allowing water to be applied more slowly and evenly to better match soil absorption rates. This results in improved landscape health, reduced water waste, and lower operating costs. The nozzles are ideal for both new installations and retrofit upgrades where improved efficiency and compliance with water conservation requirements are important.
FEATURES
- Pressure Compensating Device maintains consistent performance across pressure variations
- Patented H²O Chip Technology produces uniform droplet size and improved distribution
- Lower precipitation rate reduces runoff, misting, and water waste
- Improved wind resistance compared to conventional spray nozzles
- Single piece durable construction with no moving parts to wear out
- Compatible retrofit replacement for many standard spray nozzle systems including Toro 570 bodies
- Wide range of arcs, radii, and specialty patterns available
- Available in male and female threaded models
SPECIFICATIONS
- Radius: 1.5m – 4.6m
- Maximum Radius Reduction: 25%
- Operating Pressure Range: 275 – 500 kPa
- Recommended Pressure: 350 kPa
- Flow Rate Range: 0.2 – 9.9 L/min
- Standard Precipitation Rate: Approx. 25mm/hour
- Nozzle Trajectory: 5° to 27° depending on radius
- Corner and Side Strip Trajectory: 20°
- Thread Options: Male and Female
- Warranty: 2 Years
Davey Pump Control
Davey Pump Control (Torium2) is commonly used in household water supply, irrigation water transfer, washing system and pressure boosting applications. The Torium2 features constant flow and even water pressure control, quick cut-in for even pressure, adaptive starting, easy status-checking, pressure indicator window, great hydraulic performance, great reliability, dry run protection and auto restart, high water temperature cut-off, excessive current cut-off, corrosion and scale resistance, extra draw off capacity, power surge protection, easy installation and a 2 metre long Australian standard power lead. For further information please refer to the product specification sheet below.
Relief and Regulating Valves
1. Dripline Air/ Vacuum Relief Valve - Product Specification
2. Anka/Apex Air Release Valve - Product Specification
3. Valve Nelson Pressure Relief ACV200 - Product Specification
Relief and Regulating Valves
1. Dripline Air/ Vacuum Relief Valve - Product Specification
2. Anka/Apex Air Release Valve - Product Specification
3. Valve Nelson Pressure Relief ACV200 - Product Specification
Relief and Regulating Valves
1. Dripline Air/ Vacuum Relief Valve - Product Specification
2. Anka/Apex Air Release Valve - Product Specification
3. Valve Nelson Pressure Relief ACV200 - Product Specification
Brass Ball Valves - Lockable Handle
Brass Ball Valves are generally used in residential and light commercial applications and are suitable for both hot and cold water, compressed air and most non-corrosive fluids and hydrocarbons including diesel. These particular ball valves are lockable on and off.
Ball Valve - Brass With Stainless Steel Handle
Brass Ball Valves are generally used in residential and light commercial applications and are suitable for both hot and cold water, compressed air and most non-corrosive fluids and hydrocarbons including diesel.
Pressure Rating: 2500kPa/ 355psi
Temperature Range 10 - 120 Degrees Celsius
Can Be Used With Diesel Applications
Guyco Glass Fibre Reinforced Ball Valves
High Quality Gass Fibre Reinforced Nylon
Strong Non-Corrosive Material, UV Stabilised
Pressure Rating 1600kPa/235 psi
Philmac Ball Valve
The toughest plastic ball valves on the market, with an easy-to-turn handle.
Features:
- Potable water safe.
- UV-stabilised materials and frost resistant.
- No flow restriction.
Stainless Steel Ball Valve
Reducing Bore
Maximum Working Temperature: 180 degrees
Cold Working Pressure 6895kPa
Thread: AS1722.1
Applications for: Air, Water, Hot/Cold Corrosive Fluids in harsh environments
Bermad Solenoid Valves
Bermad 200 Series Plastic Hydraulic Electric Control Valve Flow Control
Globe Valve With 24 VAC Actuator
For solenoid valve coils click here
Bermad Quick Action Adjustable Pressure Relief Valve
Product Specifications: Pilot Valve (included in Pressure Relief Valve)
Product Specifications: Pressure Relief Setup
Pressure relief valves open when the pressure in a system exceeds a set value, releasing water and lowering the pressure in the main line. They provide fast and effective pressure relief to prevent pump damage and equipment failure.
Contact us to special order pressure sustaining and pressure reducing setups from Bermad.
A. 25mm (1”) female BSP thread inlet & outlet.
Adjustable between 100 kpa to 700 kpa.
B. 40mm (1 1/2”) female BSP thread inlet & outlet.
Adjustable between 100 kpa to 700 kpa.
Valve Boxes
Valve boxes are commonly used as covers for solenoid valves and other items
A valve box provides a cover for ground level items
Brass hot water system flow meter valve lead free 15mm is used in compatible hot water system installations where adjustable flow and an easy-to-read flow gauge are required. It is suitable for solar applications where the valve connection, pressure rating, temperature rating and flow range suit the system requirements.
This LOGI Valve flow meter has an Rp 1/2" connection, DR lead free brass body, ball and spindle, PTFE seal, FKM O-ring and PET flow gauge. It is WaterMark Lead Free approved, tested and certified to WMTS012, rated to 1000kPa maximum pressure and suitable for temperatures up to 110°C.
25mm Watermarked Solenoid Valve
Solenoid control valve with high flow and low pressure loss for use in drip, spray, and pop up sprinkler watering systems. Valve has been designed to utilise a minimum number of internal parts to ensure reliability and cost effectiveness. Features: Body material/outer casing natural Nylon 66 30% glass filled and Stainless steel plunger with natural Nitrile elastomer tip and diaphragm.
Poly Foot Valves
Glass Fibre Reinforced Nylon
Pressure Rating for Nylon Valve: 1600kPa/ 235 psi
Nylon Foot Valve - Product Specification
Brass Foot Valves
Non-return Valves, prevent backflow in a piping system, allowing water to flow in one direction.
Featuring a wide body for excellent flow with working temperatures 0°C to 120°C and a maximum pressure rating of 1600kPa.
Female BSP Thread
Poly Foot Valves
Glass Fibre Reinforced Nylon
Pressure Rating for Nylon Valve: 1600kPa/ 235 psi
Nylon Foot Valve - Product Specification
Hunter PGV Series
Professional Grade Valves
For solenoid valve coils click here
PGV Valve - Product Specification
Jar Top Valve - Product Specification
Nelson 1000 Series Pressure Relief Valve
Pressure relief valves open when the pressure in a system exceeds a set value, releasing water and lowering the pressure in the main line. They provide fast and effective pressure relief to prevent pump damage and equipment failure.
50mm (2”) female BSP thread inlet & outlet.
Glass Fibre Reinforced Non-Return Valves/ Check Valves
Allow water to travel in one direction only.
Pressure Rating 1600kPa/235 psi
Manufactured from High Quality Glass Fibre Reinforced Nylon
Rain Bird DV/DVF/PGA Solenoid Valves
The Rain Bird solenoid valves provide reliability and versatility with their many features; smooth closing diaphram for less water hammer, made with a glass-filled polypropylene body for strength, compact design with filtered pilot flow to resist debris and clogging of the solenoid internal parts.
Richdel - Irritrol Series Valves
Standard Control (SC) and Flow Control (FC)
Richdel 2400 MT/F Series - Product Specification
Richdel 204/5 Series - Product Specification
Richdel FC 25 (IV25FC) - Product Specification