Single core irrigation control wire is used in automatic irrigation systems to connect extra low voltage irrigation controller outputs to solenoid valves. It is suitable for direct burial irrigation wiring and is available in selected conductor sizes, colours and coil lengths.
This range includes selected 1.0mm², 1.5mm² and 2.5mm² single core irrigation wire options in black, blue, green, red and yellow, depending on the product. Select the conductor size and colour to suit the irrigation layout, controller station wiring and solenoid valve requirements. Use suitable waterproof connectors and sealant gel for all joins.
Multicore 0.5mm² irrigation cable is extra low voltage direct burial cable used to connect irrigation controller outputs to solenoid valves. It is suitable for irrigation control wiring where multiple valve stations need to be run through one outer-sheathed cable.
This range includes selected 3 core, 5 core, 7 core, 9 core and 13 core options in per metre, 20m, 50m, 100m and 500m purchase lengths depending on the cable type. Select the core count to suit the number of valve stations, allowing for a common wire and any spare cores required for future valve additions. Use suitable waterproof wire connectors for buried, valve box or exposed irrigation cable joins.
Multicore 1.0mm² irrigation cable in outer sheath is extra low voltage direct burial cable used to connect irrigation controller outputs to solenoid valves. It is suitable for irrigation control wiring where multiple valve stations need to be run through one outer-sheathed cable.
This range includes selected 2 core, 3 core, 5 core, 7 core, 9 core and 13 core options in 100m and 500m rolls. Select the core count to suit the number of valve stations, allowing for a common wire and any spare cores required for future valve additions. Use suitable waterproof wire connectors for buried, valve box or exposed irrigation cable joins.
Multicore 1.5mm² irrigation cable in outer sheath is extra low voltage direct burial cable used to connect irrigation controller outputs to solenoid valves. It is suitable for irrigation control wiring where multiple valve stations need to be run through one outer-sheathed cable.
This range includes selected 2 core, 3 core, 5 core, 7 core, 9 core and 13 core options in 100m and 500m rolls depending on the cable type. Select the core count to suit the number of valve stations, allowing for a common wire and any spare cores required for future valve additions. Use suitable waterproof wire connectors for buried, valve box or exposed irrigation cable joins.
Wire connectors are used to join, splice or terminate compatible wires and cables in irrigation, landscape lighting, low-voltage and general electrical applications. This range includes gel-filled and moisture-resistant connectors for suitable outdoor wiring, as well as insulated screw wire connectors for general wire or cable joining.
Select the connector type to suit the wire size, conductor type, voltage, installation location and moisture exposure. Gel-filled and moisture-resistant connectors should be used where moisture protection is required; screw connectors should only be used where their design and rating suit the application.
Elcon Aristoflex rubber flex cable is a heavy duty 0.6/1kV flexible power cable used for suitable pump, motor, generator, construction site, wet environment and temporary power applications. This 3 core and earth range provides a four-core cable configuration with a green/yellow earth core and three additional conductors.
The cable is constructed with Class 5 tinned copper conductors, EPR rubber insulation, an EPDM rubber inner sheath and a black CPE rubber outer jacket. It is designed for demanding flexible power applications, including wet or oily environments and selected submersible pump applications, subject to correct electrical selection and installation.
316 grade stainless steel wire rope and wire rope grips are used for balustrade, shade structures, architectural rigging, green walls, cable trellis, marine-style and general purpose applications. This range includes 7 x 7 stainless steel wire rope in selected 3.2mm and 4.0mm sizes, along with matching stainless steel wire rope grips for securing compatible wire rope.
The 7 x 7 wire rope has a semi-flexible construction with a bright braided finish, making it suitable for use around compatible thimbles, fittings and hand swaged sleeves. Stainless steel wire rope grips provide a mechanical fastening option where the grip size is matched to the wire rope diameter. Select wire rope, grips and fittings to suit the application, load requirements and installation method.