Poly Bush Reducing Threaded BSP fittings are male x female reducing bushes used to adapt BSP threaded fittings, valves, outlets and pipework in irrigation, plumbing, rural water and garden watering systems.
Available in sizes from 15mm x 10mm (1/2" x 3/8") – 100mm x 80mm (4" x 3"), these reducing bushes are suitable where a larger female BSP threaded opening needs to be reduced to a smaller female BSP threaded connection.
Manufactured from UVB stabilised glass fibre reinforced Nylon 6, the fittings are designed for outdoor use and harsh sunlight conditions. BSP sealing threads should be installed with Teflon thread tape or an appropriate sealing compound.
Poly Cap Threaded BSP fittings are female threaded caps used to blank off matching male BSP threaded outlets in irrigation, plumbing, rural water and garden watering systems.
Available in sizes from 15mm (1/2") – 100mm (4"), these threaded caps are suitable for pipework, manifold, valve and fitting installations where a BSP threaded end needs to be capped.
Manufactured from UVB stabilised glass fibre reinforced Nylon 6, the fittings are designed for outdoor use and harsh sunlight conditions. BSP sealing threads should be installed with Teflon thread tape or an appropriate sealing compound.
Poly Elbow
90 Degree Female Female BSP thread (1/2" size shown in image)
Commonly used to change the direction of a pipeline or divert a pipeline
Poly Threaded Elbow
Commonly used to articulate pop up sprinklers
1. Poly Elbow 90 Degree Male BSP Thread to Female BSP Thread
2. Olson Male BSP Thread to Female Super E-Z Tube
Poly Plug Threaded BSP fittings are male threaded plugs used to blank off matching female BSP threaded outlets in irrigation, plumbing, rural water and garden watering systems.
Available in sizes from 15mm (1/2") – 100mm (4"), these threaded plugs are suitable for pipework, manifold, valve and fitting installations where a female BSP threaded end needs to be plugged.
Manufactured from UVB stabilised glass fibre reinforced Nylon 6, the fittings are designed for outdoor use and harsh sunlight conditions. BSP sealing threads should be installed with Teflon thread tape or an appropriate sealing compound.
Poly Reducing Socket
Female to Female BSP Thread
Commonly used to join two male fittings of differing size
Male BSP Thread Ends.
Articulated Riser comes with 3 MF Elbows
Poly Socket
Female BSP Thread
Commonly used to join two male fittings of the same size
Poly Tee
Female BSP Thread
Commonly used to join three equally sized pipes
Tefen Fittings
Tefen fittings are commonly used within polyethylene hydraulic tube systems. All Tefen Barb-Block (No 4, 5, 6) fittings are constructed from polypropylene that is reinforced with 10% fibreglass. All Tefen Threaded Connector (No 1, 2, 3) fittings are constructed from Nylon 66. The feature quick and easy installation as well as good resistance to most chemicals used in agriculture, they also have a maximum working pressure of 1400 kPa and a temperature range of -20 - 110 degrees celsius (subject to application). All Tefen fittings supplied by Pipeco are blue in colour.
|
Hose Fitting Poly Barb Connectors x MI BSP Thread High quality glass fibre reinforced nylon rated for temperatures up to 60 degrees celsius Pressure Rating: 1/8" to 2" = 1600kPa 2 1/2" = 1200 kPa ... 3" and 4" = 1000 kPa Tapered Threads that have been engineered to maximise sealing performance |
Poly Nipple Reducing BSP fittings are male x male reducing nipples used to connect female BSP threaded fittings, valves, outlets and pipework of different sizes in irrigation, plumbing, rural water and garden watering systems.
Available in sizes from 15mm x 8mm (1/2" x 1/4") – 100mm x 80mm (4" x 3"), these reducing nipples are suitable where two female BSP threaded components need to be connected with a size reduction.
Manufactured from UVB stabilised glass fibre reinforced Nylon 6, the fittings are designed for outdoor use and harsh sunlight conditions. BSP sealing threads should be installed with Teflon thread tape or an appropriate sealing compound.
Poly Nipple Threaded BSP fittings are male threaded nipples used to connect matching female BSP threaded fittings, valves, outlets and pipework in irrigation, plumbing, rural water and garden watering systems.
Available in sizes from 15mm (1/2") – 100mm (4"), these threaded nipples are suitable for a range of installations where a male BSP threaded connection is required between compatible female BSP components.
Manufactured from UVB stabilised glass fibre reinforced Nylon 6, the fittings are designed for outdoor use and harsh sunlight conditions. BSP sealing threads should be installed with Teflon thread tape or an appropriate sealing compound.