Poly compression metric end caps are used to blank off the end of metric PE pipe in irrigation, rural water and general water supply systems. They provide a compression end seal where a pipe run needs to be temporarily or permanently capped.
This range includes the listed 20mm, 25mm, 32mm, 40mm, 50mm, 63mm, 75mm, 90mm and 110mm sizes. Sizes up to and including 63mm use the 3G compression system, while 75mm and above use the EasyLOK compression system. Confirm the pipe size, fitting system and pressure requirements before ordering.
Philmac 3G Compression Metric Technical Manual
Video 1
Video 2
Poly compression metric joiners are used to connect two lengths of metric PE pipe in irrigation, rural water and general water supply systems. They provide a straight poly x poly compression connection where the same pipe size needs to be joined.
This range includes the listed 20mm, 25mm, 32mm, 40mm, 50mm, 63mm, 75mm, 90mm and 110mm sizes. Sizes up to and including 63mm use the 3G compression system, while 75mm and above use the EasyLOK compression system. Confirm the pipe size, fitting system and pressure requirements before ordering.
Philmac 3G Compression Metric Technical Manual
Video 1
Video 2
Poly compression metric slip joiners are used to repair or reconnect metric PE pipe where pipe movement is limited. They provide a poly x poly compression connection that is useful when a standard joiner cannot be easily fitted due to fixed pipe positions or restricted movement in the trench.
This range includes the listed 25mm, 32mm and 40mm sizes. These sizes use the 3G compression system, with Slide & Tighten installation and a PN16 / 1600kPa pressure rating. Confirm the pipe size, repair layout and pressure requirements before ordering.
Video 1
Poly compression metric end connectors poly x female BSP are used to connect metric PE pipe to male BSP threaded fittings, risers, valves and pipework. They provide a compression connection on the poly pipe side and a female BSP threaded connection on the outlet side.
This range includes the listed 20mm x 3/4", 25mm x 1", 32mm x 1 1/4", 40mm x 1 1/2", 50mm x 2", 63mm x 2", 75mm x 2", 90mm x 2", 90mm x 3" and 110mm x 4" sizes. Sizes up to and including 63mm use the 3G compression system, while 75mm and above use the EasyLOK compression system. Confirm the pipe size, BSP thread size and pressure requirements before ordering.
Philmac 3G Compression Metric Technical Manual
Video 1
Video 2
Poly compression metric end connectors poly x male BSP are used to connect metric PE pipe to female BSP threaded fittings, valves, outlets and equipment. They provide a compression connection on the poly pipe side and a male BSP threaded connection on the outlet side.
This range includes the listed 20mm x 3/4", 25mm x 1/2", 25mm x 3/4", 25mm x 1", 32mm x 1 1/4", 40mm x 1 1/4", 40mm x 1 1/2", 50mm x 2", 63mm x 1 1/2", 63mm x 2", 75mm x 2", 75mm x 3", 90mm x 3" and 110mm x 4" sizes. Sizes up to and including 63mm use the 3G compression system, while 75mm and above use the EasyLOK compression system. Confirm the pipe size, BSP thread size and pressure requirements before ordering.
Philmac 3G Compression Metric Technical Manual
Video 1
Video 2
Poly compression metric elbows poly x poly are used to change direction in metric PE pipework while maintaining a compression connection on both sides. They are suitable for irrigation, rural water and general water supply systems where metric poly pipe needs to turn around corners, structures or changes in trench direction.
This range includes the listed 20mm x 20mm, 25mm x 25mm, 32mm x 32mm, 40mm x 40mm, 50mm x 50mm, 63mm x 63mm, 75mm x 75mm, 90mm x 90mm and 110mm x 110mm 90° elbows, plus the listed 63mm x 63mm 45° elbow. Sizes up to and including 63mm use the 3G compression system, while 75mm and above use the EasyLOK compression system. Confirm the pipe size, elbow angle and pressure requirements before ordering.
Philmac 3G Compression Metric Technical Manual
Video 1
Video 2
Poly compression metric elbows poly x female BSP are used to change direction from metric PE pipe to a male BSP threaded fitting, riser, valve or pipework. They provide a compression connection on the poly pipe side and a female BSP threaded connection on the outlet side.
This range includes the listed 20mm x 3/4", 25mm x 1", 32mm x 1 1/4", 40mm x 1 1/4", 40mm x 1 1/2", 50mm x 2", 63mm x 2", 75mm x 2", 90mm x 3" and 110mm x 4" elbow sizes, plus the listed 25mm x 3/4" wall plate elbow. Sizes up to and including 63mm use the 3G compression system, while 75mm and above use the EasyLOK compression system. Confirm the pipe size, BSP thread size, elbow style and pressure requirements before ordering.
Philmac 3G Compression Metric Technical Manual
Video 1
Video 2
Poly compression metric tees poly x poly x poly are used to create a branch connection from metric PE pipe while maintaining compression connections on all three sides. They are suitable for irrigation, rural water and general water supply systems where a poly pipe line needs to branch into another metric poly pipe run.
This range includes the listed 20mm x 20mm x 20mm, 25mm x 25mm x 25mm, 32mm x 32mm x 32mm, 40mm x 40mm x 40mm, 50mm x 50mm x 50mm, 63mm x 63mm x 63mm, 75mm x 75mm x 75mm, 90mm x 90mm x 90mm and 110mm x 110mm x 110mm sizes. Sizes up to and including 63mm use the 3G compression system, while 75mm and above use the EasyLOK compression system. Confirm the pipe size, branch layout and pressure requirements before ordering.
Philmac 3G Compression Metric Technical Manual
Video 1
Video 2
Poly compression metric tees poly x poly x female BSP are used to create a female BSP threaded branch from metric PE pipework. They provide compression connections on the main poly pipe line and a female BSP threaded outlet for connecting a male BSP fitting, riser, valve or pipework.
This range includes the listed 20mm x 20mm x 1/2", 20mm x 20mm x 3/4", 25mm x 25mm x 1", 32mm x 32mm x 1 1/4", 40mm x 40mm x 1 1/2", 50mm x 50mm x 2", 63mm x 63mm x 2", 75mm x 75mm x 2", 90mm x 90mm x 3" and 110mm x 110mm x 4" sizes. Sizes up to and including 63mm use the 3G compression system, while 75mm and above use the EasyLOK compression system. Confirm the pipe size, BSP thread size, branch layout and pressure requirements before ordering.
Philmac 3G Compression Metric Technical Manual
Video 1
Video 2
Poly metric tapping saddles are used to create a Female BSP threaded take-off from metric PE pipe. They are commonly used for adding a branch, riser, valve, sprinkler connection or threaded outlet to an existing poly pipe run without needing to rebuild the full line.
This range includes selected 2 bolt and 4 bolt tapping saddles with pipe sizes from 25mm to 90mm and Female BSP outlet sizes from 1/2" to 1". The first size refers to the metric PE pipe size, while the second size refers to the Female BSP threaded outlet. Confirm pipe size, outlet size, bolt configuration and installation requirements before ordering.
Video 1
Poly compression metric pipe repair couplings and kits are used to repair damaged PE metric pipe in irrigation, rural water, mains water connection and general PE pipe systems. This category includes NORMA telescopic repair couplings for individual repair fitting installations, as well as Philmac metric pipe repair kits supplied as complete repair kits.
NORMA telescopic repair couplings use an extendable body to bridge a repaired pipe section, helping reduce digging and avoiding the need to flex a long section of new pipe into place. Philmac metric repair kits include straight repair pipe, specialised fittings and step-by-step installation instructions for fast repair of metric pipe systems. Confirm the pipe size, repair type, pressure rating and installation requirements before ordering.
Norma Metric Telescopic Compression Fittings Brochure
Video 1
Poly compression metric flanged adaptors are used to connect metric PE pipe to flanged valves, pumps, meters, manifolds and pipework. They provide an EasyLOK compression connection on the poly pipe side and a flanged connection for bolting to compatible flanged equipment.
This range includes the listed 50mm x 2", 63mm x 2", 75mm x 3", 90mm x 3" and 110mm x 4" sizes. All sizes in this listed range use the EasyLOK compression system. Confirm the pipe size, flange size, gasket, bolt selection and pressure requirements before ordering.
Video 1
Poly compression rural end caps are used to blank off the end of Rural B Class red line poly pipe in rural water supply, stock water, irrigation and general farm water systems. They provide a rural compression end seal where a pipe run needs to be temporarily or permanently capped.
This range includes the listed 3/4", 1", 1-1/4", 1-1/2" and 2" sizes. The rural compression system uses an insert assembly and can be disassembled and reconnected when required. Rural red line poly pipe and fittings are rated to a maximum operating pressure of 900kPa at 20°C. Confirm the rural pipe size, pressure and application requirements before ordering.
Video 1
Poly compression rural joiners poly x poly are used to connect two lengths of Rural B Class red line poly pipe in rural water supply, stock water, irrigation and general farm water systems. They provide a straight rural compression connection where the same rural pipe size needs to be joined.
This range includes the listed 3/4", 1", 1-1/4", 1-1/2" and 2" sizes. The rural compression system uses an insert assembly and can be disassembled and reconnected when required. Rural red line poly pipe and fittings are rated to a maximum operating pressure of 900kPa at 20°C. Confirm the rural pipe size, pressure and application requirements before ordering.
Video 1
Poly compression rural end connectors poly x female BSP are used to connect Rural B Class red line poly pipe to male BSP threaded fittings, risers, valves and pipework. They provide a rural compression connection on the poly pipe side and a female BSP threaded connection on the outlet side.
This range includes the listed 3/4" x 3/4", 1" x 1", 1-1/4" x 1-1/4", 1-1/2" x 1-1/2" and 2" x 2" sizes. The first size refers to the rural poly pipe size, while the second size refers to the female BSP threaded outlet. Rural red line poly pipe and fittings are rated to a maximum operating pressure of 900kPa at 20°C. Confirm the rural pipe size, BSP thread size, pressure and application requirements before ordering.
Video 1
Poly compression rural end connectors poly x male BSP are used to connect Rural B Class red line poly pipe to female BSP threaded fittings, valves, outlets and equipment. They provide a rural compression connection on the poly pipe side and a male BSP threaded connection on the outlet side.
This range includes the listed 3/4" x 3/4", 1" x 1", 1-1/4" x 1-1/4", 1-1/2" x 1-1/2", 1-1/2" x 1-1/4", 2" x 1-1/2" and 2" x 2" sizes. The first size refers to the rural poly pipe size, while the second size refers to the male BSP thread size. Rural red line poly pipe and fittings are rated to a maximum operating pressure of 900kPa at 20°C. Confirm the rural pipe size, BSP thread size, pressure and application requirements before ordering.
Video 1
Poly compression rural elbows poly x poly are used to change direction between two lengths of Rural B Class red line poly pipe in rural water supply, stock water, irrigation and general farm water systems. They provide a rural compression connection on both sides where rural poly pipework needs to turn around corners, structures or changes in trench direction.
This range includes the listed 3/4", 1", 1-1/4", 1-1/2" and 2" sizes. The rural compression system uses an insert assembly and can be disassembled and reconnected when required. Rural red line poly pipe and fittings are rated to a maximum operating pressure of 900kPa at 20°C. Confirm the rural pipe size, pressure and application requirements before ordering.
Video 1
Poly compression rural elbows poly x female BSP are used to change direction from Rural B Class red line poly pipe into a male BSP threaded fitting, valve, riser or outlet. They provide a rural compression connection on the poly pipe side and a female BSP threaded connection on the outlet side.
This range includes the listed 3/4" x 3/4", 1" x 1", 1-1/4" x 1-1/4", 1-1/2" x 1-1/2", 1-1/2" x 1-1/4" and 2" x 2" sizes. The first size refers to the rural poly pipe size, while the second size refers to the female BSP thread size. Rural red line poly pipe and fittings are rated to a maximum operating pressure of 900kPa at 20°C. Confirm the rural pipe size, BSP thread size, pressure and application requirements before ordering.
Video 1
Poly compression rural tees poly x poly x poly are used to create a branch connection between Rural B Class red line poly pipe in rural water supply, stock water, irrigation and general farm water systems. They provide rural compression connections on all three sides for connecting a main pipe run and branch line.
This range includes the listed 3/4" x 3/4" x 3/4", 1" x 1" x 1", 1-1/4" x 1-1/4" x 1-1/4", 1-1/2" x 1-1/2" x 1-1/2" and 2" x 2" x 2" sizes. Rural red line poly pipe and fittings are rated to a maximum operating pressure of 900kPa at 20°C. Confirm the rural pipe sizes, pressure and application requirements before ordering.
Video 1
Poly compression rural tees poly x poly x female BSP are used to create a female BSP threaded branch from Rural B Class red line poly pipe. They provide rural compression connections on the main poly pipe run and a female BSP threaded outlet for connecting male BSP threaded fittings, risers, valves or take-offs.
This range includes the listed 3/4" x 3/4" x 3/4", 1" x 1" x 1", 1-1/4" x 1-1/4" x 1-1/4", 1-1/2" x 1-1/2" x 1-1/2" and 2" x 2" x 2" sizes. The first two sizes refer to the rural poly pipe connections, while the third size refers to the female BSP threaded branch. Rural red line poly pipe and fittings are rated to a maximum operating pressure of 900kPa at 20°C. Confirm the rural pipe sizes, BSP thread size, pressure and application requirements before ordering.
Video 1
Poly rural tapping saddles are used to create a Female BSP threaded take-off from rural PE pipe without cutting out the main pipe section. They are commonly used for rural water supply, stock water, irrigation and general farm water systems where a branch, riser, valve or threaded outlet needs to be added to an existing rural poly pipe line.
This range includes single-bolt and double-bolt rural tapping saddles in selected pipe and Female BSP thread sizes. Single-bolt models use a hinged saddle design to help with clamping around rural pipe, including installations in narrow trenches. Rural tapping saddles are suitable for above or below ground installation, provided the pipe surface is clean and un-scoured before fitting. Confirm the pipe size, thread size, bolt configuration and system pressure before ordering.
Video 1
Poly compression rural pipe repair couplings and kits are used to repair damaged rural PE pipe in stock water, irrigation, farm water supply and general rural water systems. This category includes NORMA rural telescopic repair couplings for individual repair fitting installations, as well as Philmac rural pipe repair kits supplied as complete repair kits.
NORMA rural telescopic repair couplings use an extendable body to bridge a repaired pipe section, helping reduce digging and avoiding the need to flex a long section of replacement pipe into place. Philmac rural pipe repair kits include straight repair pipe, specialised Philmac fittings and step-by-step installation instructions for fast repair of rural pipe systems. Confirm the pipe size, repair type, pressure rating and installation requirements before ordering.
Norma Rural Telescopic Compression Fittings Brochure
Video 1
Poly compression metric end caps are used to blank off the end of PE metric pipe in irrigation, rural water, mains water connection and general PE pipe systems. They provide a compression blanking point where a metric poly pipe run needs to be temporarily or permanently capped.
This NORMA range includes the listed 63mm, 75mm, 90mm and 110mm sizes. NORMA metric compression fittings suit PE metric pipe made in accordance with AS/NZS 4130 and use blue metric identification ends for easy selection. Pressure rating is size based, with 63mm rated to 1600kPa and 75mm to 110mm rated to 1250kPa. Confirm the pipe size, pressure rating and application requirements before ordering.
Poly compression metric joiners poly x poly are used to connect two lengths of PE metric pipe in irrigation, rural water, mains water connection and general PE pipe systems. They provide a straight compression connection where the same metric pipe size needs to be joined.
This NORMA range includes the listed 63mm x 63mm, 75mm x 75mm, 90mm x 90mm and 110mm x 110mm sizes. NORMA metric compression fittings suit PE metric pipe made in accordance with AS/NZS 4130 and use blue metric identification ends for easy selection. Pressure rating is size based, with 63mm rated to 1600kPa and 75mm to 110mm rated to 1250kPa. Confirm the pipe size, pressure rating and application requirements before ordering.
Poly compression metric end connectors poly x female BSP are used to connect PE metric pipe to male BSP threaded fittings, risers, valves and pipework. They provide a metric compression connection on the poly pipe side and a female BSP threaded connection on the outlet side.
This NORMA range includes the listed 63mm x 2", 75mm x 2", 90mm x 3" and 110mm x 4" sizes. NORMA metric compression fittings suit PE metric pipe made in accordance with AS/NZS 4130 and use blue metric identification ends for easy selection. Pressure rating is size based, with 63mm rated to 1600kPa and 75mm to 110mm rated to 1250kPa. Confirm the pipe size, thread size, pressure rating and application requirements before ordering.
Poly compression metric end connectors poly x male BSP are used to connect PE metric pipe to female BSP threaded fittings, valves, outlets and equipment. They provide a metric compression connection on the poly pipe side and a male BSP threaded connection on the outlet side.
This NORMA range includes the listed 63mm x 2", 75mm x 2", 90mm x 3" and 110mm x 4" sizes. NORMA metric compression fittings suit PE metric pipe made in accordance with AS/NZS 4130 and use blue metric identification ends for easy selection. Pressure rating is size based, with 63mm rated to 1600kPa and 75mm to 110mm rated to 1250kPa. Confirm the pipe size, thread size, pressure rating and application requirements before ordering.
Poly compression metric elbows poly x poly are used to change direction between two lengths of PE metric pipe in irrigation, rural water, mains water connection and general PE pipe systems. They provide a metric compression connection on both sides where pipework needs to turn around corners, structures or changes in trench direction.
This NORMA range includes the listed 63mm x 63mm, 75mm x 75mm, 90mm x 90mm and 110mm x 110mm sizes. NORMA metric compression fittings suit PE metric pipe made in accordance with AS/NZS 4130 and use blue metric identification ends for easy selection. Pressure rating is size based, with 63mm rated to 1600kPa and 75mm to 110mm rated to 1250kPa. Confirm the pipe size, pressure rating and application requirements before ordering.
Poly compression metric elbows poly x female BSP are used to change direction from PE metric pipe into male BSP threaded fittings, risers, valves or outlets. They provide a metric compression connection on the poly pipe side and a female BSP threaded connection on the outlet side.
This NORMA range includes the listed 63mm x 2", 90mm x 3" and 110mm x 4" sizes. NORMA metric compression fittings suit PE metric pipe made in accordance with AS/NZS 4130 and use blue metric identification ends for easy selection. Pressure rating is size based, with 63mm rated to 1600kPa and 90mm to 110mm rated to 1250kPa. Confirm the pipe size, thread size, pressure rating and application requirements before ordering.
Poly compression metric tees poly x poly x poly are used to connect three lengths of PE metric pipe, creating a branch from a main pipe run. They provide metric compression connections on all three sides for irrigation, rural water, mains water connection and general PE pipe systems.
This NORMA range includes the listed 63mm x 63mm x 63mm, 75mm x 75mm x 75mm, 90mm x 90mm x 90mm and 110mm x 110mm x 110mm sizes. NORMA metric compression fittings suit PE metric pipe made in accordance with AS/NZS 4130 and use blue metric identification ends for easy selection. Pressure rating is size based, with 63mm rated to 1600kPa and 75mm to 110mm rated to 1250kPa. Confirm the pipe size, pressure rating and application requirements before ordering.
Poly compression metric tees poly x poly x female BSP are used to create a female BSP threaded branch from a PE metric pipe run. They provide metric compression connections on the main pipe and a female BSP threaded branch for connecting male BSP threaded fittings, risers, valves or outlets.
This NORMA range includes the listed 63mm x 63mm x 2", 90mm x 90mm x 3" and 110mm x 110mm x 4" sizes. NORMA metric compression fittings suit PE metric pipe made in accordance with AS/NZS 4130 and use blue metric identification ends for easy selection. Pressure rating is size based, with 63mm rated to 1600kPa and 90mm to 110mm rated to 1250kPa. Confirm the pipe size, thread size, pressure rating and application requirements before ordering.