Norma compression end cap with blue pipe nut and black closed end.
Norma compression end cap with blue pipe nut and black closed end.
Norma compression end cap with blue pipe nut and black closed end.

NORMA METRIC END CAPS

NORMA metric end caps for metric poly pipe, with a single compression connection to close the end of the pipe.

✓ Fitting System: NORMA metric
✓ Connections: A single compression connection to close the end of the pipe
✓ Pipe: Metric PE pipe, sized by outside diameter
✓ Pressure Rating: 63mm: 1600kPa. 75mm to 110mm: 1250kPa.

Norma Metric Compression Fittings Brochure

Norma compression end cap with blue pipe nut and black closed end.

NORMA metric end caps for metric poly pipe, with a single compression connection to close the end of the pipe.

The NORMA compression design allows pipe insertion without removing the nuts. Blue ends identify the metric connection, and the two-stage seal tightens around the pipe as the nut is tightened.

Metric pipe size refers to the pipe’s outside diameter. Match the compression end to that diameter. Rural pipe uses a different sizing system and needs the appropriate rural fitting.

Norma Metric Compression Fittings Brochure

✓ Product Type & Size
NORMA metric end caps. Available sizes are shown in the product selector.

✓ Connection
Poly x blank metric compression end cap.

✓ Application
Used to blank off the end of PE metric pipe.

✓ Pipe Compatibility
Suitable for PE metric pipe made in accordance with AS/NZS 4130.

✓ Pressure Rating
63mm: 1600kPa. 75mm to 110mm: 1250kPa.

✓ Approval
WaterMark approved.

✓ Installation
Cut pipe square, deburr if required, mark the insertion depth, insert the pipe fully and tighten the nut until the mark is only just visible.

✓ Material
Polypropylene copolymer body, nut and holder with NBR metric O-ring and acetal clinching ring.

Recently viewed