Brass Threaded Plugs have a male BSP thread. They blank off unused female threaded fittings, outlets or pipe connections.
Made from DR lead free brass, these fittings are suitable for plumbing, irrigation and rural water systems. Use suitable thread sealant or PTFE tape on the male BSP thread before installing into a female connection.
Avoid joining brass, galvanised and stainless steel fittings directly to one another. Use a plastic or other suitable non-conductive fitting or adaptor between different metals to prevent galvanic corrosion where water is present.
Brass Threaded Sockets have female BSP threads at both ends. They join two male threaded fittings or pipe ends in a straight line.
These sockets are also known as threaded couplings.
Made from DR lead free brass, these fittings are suitable for plumbing, irrigation and rural water systems. Use suitable thread sealant or PTFE tape on the mating male BSP threads.
Avoid joining brass, galvanised and stainless steel fittings directly to one another. Use a plastic or other suitable non-conductive fitting or adaptor between different metals to prevent galvanic corrosion where water is present.
Brass Threaded Nipples have male BSP threads at both ends. They join two female threaded fittings, valves or pipe connections in a straight line.
Made from DR lead free brass, these fittings are suitable for plumbing, irrigation and rural water systems. Use suitable thread sealant or PTFE tape on the male BSP threads before installing into female connections.
Avoid joining brass, galvanised and stainless steel fittings directly to one another. Use a plastic or other suitable non-conductive fitting or adaptor between different metals to prevent galvanic corrosion where water is present.
Brass Elbows 90° have female BSP threads at both ends. They accept matching male fittings to change the direction of pipework by 90°.
Made from DR lead free brass, these fittings are suitable for plumbing, irrigation and rural water systems. Use suitable thread sealant or PTFE tape on the mating male BSP threads.
Avoid joining brass, galvanised and stainless steel fittings directly to one another. Use a plastic or other suitable non-conductive fitting or adaptor between different metals to prevent galvanic corrosion where water is present.
Brass Threaded Tees have female BSP threads on all three openings. They accept matching male fittings to create a branch in pipework or a valve assembly.
Made from DR lead free brass, these fittings are suitable for plumbing, irrigation and rural water systems. Use suitable thread sealant or PTFE tape on the mating male BSP threads.
Avoid joining brass, galvanised and stainless steel fittings directly to one another. Use a plastic or other suitable non-conductive fitting or adaptor between different metals to prevent galvanic corrosion where water is present.
Brass Reducing Nipples have male BSP threads of different sizes at opposite ends. They join female threaded components of different sizes in a straight line.
Made from DR lead free brass, these fittings are suitable for plumbing, irrigation and rural water systems. Use suitable thread sealant or PTFE tape on the male BSP threads before installing into female connections.
Avoid joining brass, galvanised and stainless steel fittings directly to one another. Use a plastic or other suitable non-conductive fitting or adaptor between different metals to prevent galvanic corrosion where water is present.
Brass Threaded Reducing Nipple Male x Male BSP Specifications
Brass Reducing Bushes have a larger male BSP outside thread and a smaller female BSP inside thread. They reduce a female threaded opening to accept a smaller male BSP fitting.
Made from DR lead free brass, these fittings are suitable for plumbing, irrigation and rural water systems. Use suitable thread sealant or PTFE tape on the bush’s outside male thread and the male thread of the fitting installed into it.
Avoid joining brass, galvanised and stainless steel fittings directly to one another. Use a plastic or other suitable non-conductive fitting or adaptor between different metals to prevent galvanic corrosion where water is present.
Brass Threaded Reducing Bush Male x Female BSP Specifications
Brass male threaded hose barbs are used to connect flexible hose to BSP threaded fittings, valves, pumps and pipework. They are suitable for plumbing, irrigation, rural water and general water systems where a hose connection is required from a male threaded adaptor.
Made from DR lead free brass, these hose barbs provide a male BSP thread on one end and a hose barb connection on the other. Use suitable thread sealant or PTFE tape on the BSP thread and secure the hose with a suitable hose clamp.
Brass Threaded Hose Barb Male BSP x Hose Barb Specifications
Brass male threaded swivel hose barbs are used to connect flexible hose to BSP threaded fittings, valves, pumps and pipework while allowing the hose barb connection to rotate during installation. They are suitable for plumbing, irrigation, rural water and general water systems where hose alignment is important.
These fittings use brass threaded and hose barb components with a stainless steel circlip and EPDM O-ring. Use suitable thread sealant or PTFE tape on the BSP thread and secure the hose with a suitable hose clamp.
Brass Threaded Swivel Hose Barb Male BSP x Hose Barb Specifications
Brass hose nut and tails are used to connect flexible hose to male BSP threaded fittings, outlets and pipework with a removable nut and sealing washer connection. They are suitable for plumbing, irrigation, rural water and general water systems where a hose tail connection needs to be fitted to a male threaded outlet.
Made with a brass nut, DR lead free brass tail and EPDM washer, these fittings provide a female BSP nut connection on one end and a hose tail connection on the other. Secure the hose with a suitable hose clamp and ensure the washer is correctly seated during installation.
Brass Hose Nut and Tail Female BSP x Hose Tail Specifications
Brass hose taps provide a manually operated water outlet for connecting a garden hose. Standard, wall-mount and vandal-proof taps have 15mm x 20mm or 20mm x 25mm connections. Choose the body style and connection sizes to suit the installation. Vandal-proof versions limit access to operation, while wall-mount versions provide a backplate for fixing the tap in position.
Standard taps use a conventional handle. The wall-mount design has a backplate, while the vandal-proof design uses a removable operating key. The existing range also lists a replacement key as a separate accessory.
Provide access to the operating handle or key, and match the inlet and hose outlet sizes to the installation.
15mm taps have a 20mm hose outlet; 20mm taps have a 25mm hose outlet. Maximum pressure is 1000kPa.
Brass Hose Tap Specifications
Brass Hose Tap Wall Mount Lead Free Specifications
Brass Hose Tap Vandal Proof Specifications
Brass Conetite compression unions are used to join two copper pipe ends in a straight line using a mechanical nylon olive compression connection. They are commonly used in plumbing, irrigation, water supply and repair work where copper pipe needs to be joined without soldering.
Made from DR lead free brass with brass compression nuts and nylon olives, these unions are WaterMark Lead Free approved and tested to AS 3688. Install onto clean, round copper pipe in the matching size and tighten the compression nuts so the nylon olives compress onto the pipe.
Brass Conetite compression elbows are used to change direction between two copper pipe runs using a mechanical nylon olive compression connection. They are commonly used in plumbing, irrigation, water supply and repair work where copper pipe needs to be redirected without soldering.
Made from DR lead free brass with brass compression nuts and nylon olives, these elbows are WaterMark Lead Free approved and tested to AS 3688. Install onto clean, round copper pipe in the matching size and tighten the compression nuts so the nylon olives compress onto the pipe.
Brass Conetite compression x female BSP elbows are used to connect copper pipe to a male BSP threaded fitting, riser, valve or outlet at 90°. They are commonly used in plumbing, irrigation, water supply and repair work where copper pipe needs to transition to a threaded connection without soldering.
Made from DR lead free brass with a brass compression nut and nylon olive, these elbows are WaterMark Lead Free approved and tested to AS 3688. Install onto clean, round copper pipe on the compression end and use suitable thread sealant or PTFE tape on the BSP threaded connection only.
Brass Conetite Elbow Copper Pipe x Female BSP Specifications
Brass Conetite lugged elbows are used to connect copper pipe to a female BSP wall outlet point at 90° using a mechanical nylon olive compression connection. They are commonly used in plumbing, irrigation, water supply and repair work where copper pipe needs to finish at a fixed threaded outlet without soldering.
Made from DR lead free brass with a brass compression nut and nylon olive, these lugged elbows are WaterMark Lead Free approved and tested to AS 3688. Install onto clean, round copper pipe on the compression end and fix the lugged body securely before connecting a compatible male BSP threaded fitting.
Brass Conetite Lugged Elbow Copper Pipe x Female BSP Specifications
Brass Conetite compression tees are used to create a branch connection between three copper pipe runs using mechanical nylon olive compression connections. They are commonly used in plumbing, irrigation, water supply and repair work where copper pipe needs to be branched without soldering.
Made from DR lead free brass with brass compression nuts and nylon olives, these tees are WaterMark Lead Free approved and tested to AS 3688. Install onto clean, round copper pipe in the matching size and tighten the compression nuts so the nylon olives compress onto the pipe.
Brass flared adaptors copper x male BSP are used to connect copper pipe to a female BSP threaded fitting, valve, outlet or pipe connection. They are commonly used in plumbing, irrigation, water supply and repair work where copper pipe needs to transition to a male threaded connection.
Made from DR lead free brass with a brass compression nut, these flared adaptors are WaterMark Lead Free approved and tested to AS 3688. Install with correctly prepared copper pipe on the flare/compression end and use suitable thread sealant or PTFE tape on the male BSP threaded connection only.
Brass flared elbows copper x female BSP are used to connect copper pipe to a male BSP threaded fitting, riser, valve or outlet at 90°. They are commonly used in plumbing, irrigation, water supply and repair work where copper pipe needs to transition to a female threaded elbow connection.
Made from DR lead free brass with a brass compression nut, these flared elbows are WaterMark Lead Free approved and tested to AS 3688. Install with correctly prepared copper pipe on the flare/compression end and use suitable thread sealant or PTFE tape on the male BSP threaded connection only.
Brass flanged bib extensions are used to screw onto an existing 15mm male BSP wall outlet and bring the female threaded connection forward from the wall or finished surface. They are commonly used when a male threaded outlet is recessed, too short, or needs to project further through brickwork, render, cladding, tiles or other finished surfaces before fitting a bib tap, hose cock, garden tap, valve or irrigation connection.
Made from DR lead free brass, these flanged bib extensions provide 15mm female BSP threads at both ends. The flange gives a neat finish against the wall face, while the extension length helps position the outlet where it is easier to connect and service.
Brass Flanged Bib Extension Screwed Female BSP Specifications
Brass capillary wall plate elbows are used to connect copper pipe to a fixed female BSP threaded outlet at 90°. They are commonly used for wall-mounted plumbing outlets where copper pipe needs to finish at a secure threaded connection for a tap, valve, mixer connection, hose cock, irrigation outlet or other compatible male BSP fitting.
Made from DR lead free brass, these lugged wall plate elbows have a capillary socket for copper pipe and a female BSP internal thread for the outlet connection. The lugged base allows the fitting to be fixed securely to a wall, noggin, backing board or mounting surface before the connected tap or fitting is installed.
Brass Capillary Wall Plate Elbow Copper x Female BSP Specifications
Brass Tank Flange 50mm x 40mm provides a sealed threaded connection through a water tank wall. It has a larger 50mm (2") male BSP outside thread and a smaller 40mm (1 1/2") female BSP inside thread.
Fit the flange through a correctly sized tank-wall opening. The supplied nut and washers secure and seal it against the wall.
The assembly has a DR lead free brass body, brass nut, EPDM washer and fibre washer. Use suitable sealing on connected pipe threads where required.
Avoid joining brass, galvanised and stainless steel fittings directly to one another. Use a plastic or other suitable non-conductive fitting or adaptor between different metals to prevent galvanic corrosion where water is present.
Galvanised Threaded Caps have a female BSP thread. They close male threaded pipe ends, fittings or outlets.
The bodies are made from hot dip galvanised malleable iron for water, air and general pipework applications. Use suitable thread sealant or PTFE tape on the mating male BSP threads.
Avoid joining brass, galvanised and stainless steel fittings directly to one another. Use a plastic or other suitable non-conductive fitting or adaptor between different metals to prevent galvanic corrosion where water is present.
Galvanised Malleable Iron Threaded Cap Female BSP Specifications
Galvanised Threaded Couplings have female BSP threads at both ends. They join two male threaded fittings or pipe ends in a straight line.
The bodies are made from hot dip galvanised malleable iron for water, air and general pipework applications. Use suitable thread sealant or PTFE tape on the mating male BSP threads.
Avoid joining brass, galvanised and stainless steel fittings directly to one another. Use a plastic or other suitable non-conductive fitting or adaptor between different metals to prevent galvanic corrosion where water is present.
Galvanised Malleable Iron Threaded Coupling Female BSP Specifications
Galvanised Hex Nipples have male BSP threads at both ends. They join two female threaded fittings, valves or pipe connections in a straight line.
The hex section provides a grip for a spanner during installation.
The bodies are made from hot dip galvanised malleable iron for water, air and general pipework applications. Use suitable thread sealant or PTFE tape on the male BSP threads before installing into female connections.
Avoid joining brass, galvanised and stainless steel fittings directly to one another. Use a plastic or other suitable non-conductive fitting or adaptor between different metals to prevent galvanic corrosion where water is present.
Galvanised Malleable Iron Hex Nipple Male BSP Specifications
Galvanised Elbows 90° have female BSP threads at both ends. They accept matching male fittings to change the direction of pipework by 90°.
The bodies are made from hot dip galvanised malleable iron for water, air and general pipework applications. Use suitable thread sealant or PTFE tape on the mating male BSP threads.
Avoid joining brass, galvanised and stainless steel fittings directly to one another. Use a plastic or other suitable non-conductive fitting or adaptor between different metals to prevent galvanic corrosion where water is present.
Galvanised Malleable Iron Elbow 90° Female BSP Specifications
Galvanised Elbows 45° have female BSP threads at both ends. They accept matching male fittings to change the direction of pipework by 45°.
The bodies are made from hot dip galvanised malleable iron for water, air and general pipework applications. Use suitable thread sealant or PTFE tape on the mating male BSP threads.
Avoid joining brass, galvanised and stainless steel fittings directly to one another. Use a plastic or other suitable non-conductive fitting or adaptor between different metals to prevent galvanic corrosion where water is present.
Galvanised Malleable Iron Elbow 45° Female BSP Specifications
Galvanised Threaded Tees have female BSP threads on all three openings. They accept matching male fittings to create a branch in pipework or a valve assembly.
The bodies are made from hot dip galvanised malleable iron for water, air and general pipework applications. Use suitable thread sealant or PTFE tape on the mating male BSP threads.
Avoid joining brass, galvanised and stainless steel fittings directly to one another. Use a plastic or other suitable non-conductive fitting or adaptor between different metals to prevent galvanic corrosion where water is present.
Galvanised Brass Seat Barrel Unions have female BSP threads at both ends. They join male threaded pipework through a central union connection that opens for maintenance.
The central union can be opened without unscrewing the end connections from the pipework. A brass seat forms the union joint.
The bodies are made from hot dip galvanised malleable iron for water, air and general pipework applications. Use suitable thread sealant or PTFE tape on the mating male BSP threads.
Avoid joining brass, galvanised and stainless steel fittings directly to one another. Use a plastic or other suitable non-conductive fitting or adaptor between different metals to prevent galvanic corrosion where water is present.
Galvanised Malleable Iron Brass Seat Barrel Union Female BSP Specifications
Galvanised Reducing Hex Bushes have a larger male BSP outside thread and a smaller female BSP inside thread. They reduce a female threaded opening to accept a smaller male BSP fitting.
The hex section provides a grip for a spanner during installation.
The bodies are made from hot dip galvanised malleable iron for water, air and general pipework applications. Use suitable thread sealant or PTFE tape on the bush’s outside male thread and the male thread of the fitting installed into it.
Avoid joining brass, galvanised and stainless steel fittings directly to one another. Use a plastic or other suitable non-conductive fitting or adaptor between different metals to prevent galvanic corrosion where water is present.
Galvanised Malleable Iron Reducing Hex Bush Male x Female BSP Specifications
Galvanised Reducing Couplings have female BSP threads of different sizes at opposite ends. They join male threaded fittings or pipe ends of different sizes in a straight line.
The bodies are made from hot dip galvanised malleable iron for water, air and general pipework applications. Use suitable thread sealant or PTFE tape on the mating male BSP threads.
Avoid joining brass, galvanised and stainless steel fittings directly to one another. Use a plastic or other suitable non-conductive fitting or adaptor between different metals to prevent galvanic corrosion where water is present.
Galvanised Malleable Iron Reducing Coupling Female x Female BSP Specifications
Galvanised Reducing Hex Nipples have male BSP threads of different sizes at opposite ends. They join female threaded components of different sizes in a straight line.
The hex section provides a grip for a spanner during installation.
The bodies are made from hot dip galvanised malleable iron for water, air and general pipework applications. Use suitable thread sealant or PTFE tape on the male BSP threads before installing into female connections.
Avoid joining brass, galvanised and stainless steel fittings directly to one another. Use a plastic or other suitable non-conductive fitting or adaptor between different metals to prevent galvanic corrosion where water is present.
Galvanised Malleable Iron Reducing Hex Nipple Male x Male BSP Specifications
Galvanised Threaded Flanges have a female BSP centre thread and BS10 Table D drilling. They connect male threaded pipework to matching bolted Table D flange connections.
The bodies are made from hot dip galvanised malleable iron for water, air and general pipework applications. Use suitable thread sealant or PTFE tape on the BSP joint and fit a suitable flange gasket and bolts.
Avoid joining brass, galvanised and stainless steel fittings directly to one another. Use a plastic or other suitable non-conductive fitting or adaptor between different metals to prevent galvanic corrosion where water is present.
Galvanised Malleable Iron Threaded Flange Table D Female BSP Specifications
Galvanised Threaded Risers have male BSP taper threads at both ends. They extend pipework or provide fixed spacing between matching female threaded connections.
The first dimension is the nominal pipe size; the second is the pipe length.
Made from galvanised medium pipe, these risers are suitable for water, air and general pipework applications. Use suitable thread sealant or PTFE tape on the male BSP threads before installing into female connections.
Avoid joining brass, galvanised and stainless steel fittings directly to one another. Use a plastic or other suitable non-conductive fitting or adaptor between different metals to prevent galvanic corrosion where water is present.
Stainless Steel 316 Hex Plugs have a male BSP thread. They blank off unused female threaded fittings, outlets or pipe connections.
The hex head provides a grip for a spanner during installation.
Made from grade 316 stainless steel, these fittings provide a corrosion-resistant threaded connection. Use suitable thread sealant or PTFE tape on the male BSP thread before installing into a female connection.
Avoid joining brass, galvanised and stainless steel fittings directly to one another. Use a plastic or other suitable non-conductive fitting or adaptor between different metals to prevent galvanic corrosion where water is present.
Stainless Steel 316 Couplings have female BSP threads at both ends. They join two male threaded fittings or pipe ends in a straight line.
Made from grade 316 stainless steel, these fittings provide a corrosion-resistant threaded connection. Use suitable thread sealant or PTFE tape on the mating male BSP threads.
Avoid joining brass, galvanised and stainless steel fittings directly to one another. Use a plastic or other suitable non-conductive fitting or adaptor between different metals to prevent galvanic corrosion where water is present.
Stainless Steel 316 Hex Nipples have male BSP threads at both ends. They join two female threaded fittings, valves or pipe connections in a straight line.
The hex section provides a grip for a spanner during installation.
Made from grade 316 stainless steel, these fittings provide a corrosion-resistant threaded connection. Use suitable thread sealant or PTFE tape on the male BSP threads before installing into female connections.
Avoid joining brass, galvanised and stainless steel fittings directly to one another. Use a plastic or other suitable non-conductive fitting or adaptor between different metals to prevent galvanic corrosion where water is present.
Stainless Steel 316 Hex Nipple Male x Male BSP Specifications
Stainless Steel 316 Elbows 90° have female BSP threads at both ends. They accept matching male fittings to change the direction of pipework by 90°.
Made from grade 316 stainless steel, these fittings provide a corrosion-resistant threaded connection. Use suitable thread sealant or PTFE tape on the mating male BSP threads.
Avoid joining brass, galvanised and stainless steel fittings directly to one another. Use a plastic or other suitable non-conductive fitting or adaptor between different metals to prevent galvanic corrosion where water is present.
Stainless Steel 316 Hex Tees have female BSP threads on all three openings. They accept matching male fittings to create a branch in pipework or a valve assembly.
Made from grade 316 stainless steel, these fittings provide a corrosion-resistant threaded connection. Use suitable thread sealant or PTFE tape on the mating male BSP threads.
Avoid joining brass, galvanised and stainless steel fittings directly to one another. Use a plastic or other suitable non-conductive fitting or adaptor between different metals to prevent galvanic corrosion where water is present.
Stainless Steel 316 Reducing Bushes have a larger male BSP outside thread and a smaller female BSP inside thread. They reduce a female threaded opening to accept a smaller male BSP fitting.
Made from grade 316 stainless steel, these fittings provide a corrosion-resistant threaded connection. Use suitable thread sealant or PTFE tape on the bush’s outside male thread and the male thread of the fitting installed into it.
Avoid joining brass, galvanised and stainless steel fittings directly to one another. Use a plastic or other suitable non-conductive fitting or adaptor between different metals to prevent galvanic corrosion where water is present.
Stainless Steel 316 Reducing Bush Male x Female BSP Specifications
Stainless Steel 316 Reducing Hex Nipples have male BSP threads of different sizes at opposite ends. They join female threaded components of different sizes in a straight line.
The hex section provides a grip for a spanner during installation.
Made from grade 316 stainless steel, these fittings provide a corrosion-resistant threaded connection. Use suitable thread sealant or PTFE tape on the male BSP threads before installing into female connections.
Avoid joining brass, galvanised and stainless steel fittings directly to one another. Use a plastic or other suitable non-conductive fitting or adaptor between different metals to prevent galvanic corrosion where water is present.
Stainless Steel 316 Reducing Hex Nipple Male x Male BSP Specifications
Galvanised Pipe Riser
Male BSP thread
Maximum working pressure of 1379 kPa for water and 1034 kPa for gas, steam and compressed air
Complies with standards EN 10242 : 1994, ASTM A-197, ASTM A167, AS 1772.1 / ISO 7/1
Product Specification