Brass Increasing Elbow Conetite/Compression x BSPF 15mm x 20mm (1/2" x 3/4")
Brass Increasing Elbow Conetite/Compression x BSPF 15mm x 20mm (1/2" x 3/4")

BRASS CONETITE INCREASING ELBOW 90° 15MM X 20MM COMPRESSION X FEMALE BSP FOR COPPER PIPE

Brass Conetite 15mm x 20mm increasing elbow used to connect 15mm copper pipe to a 20mm (3/4") male BSP threaded fitting, riser, valve or outlet at 90°.

✓ For 15mm Copper Pipe
✓ 15mm Compression x 20mm Female BSP
✓ 90° Increasing Elbow Fitting
✓ Nylon Olive Included
✓ DR Lead Free Brass Body
✓ 1600kPa Maximum Pressure Rating

Brass Conetite Elbow Copper Pipe x Female BSP Specifications

More Information
Product Specifications
Brass Increasing Elbow Conetite/Compression x BSPF 15mm x 20mm (1/2" x 3/4")
BRASS CONETITE INCREASING ELBOW 90° 15MM X 20MM COMPRESSION X FEMALE BSP FOR COPPER PIPE
Brass Elbow Conetite/Compression x BSPF 15mm (1/2")
Brass Elbow Conetite/Compression x BSPF 15mm (1/2") B08C15C15FI
$4.27 /each
Brass Increasing Elbow Conetite/Compression x BSPF 15mm x 20mm (1/2" x 3/4")
Brass Increasing Elbow Conetite/Compression x BSPF 15mm x 20mm (1/2" x 3/4") B08C15C20FI
$5.82 /each
Brass Elbow Conetite/Compression x BSPF 20mm (3/4")
Brass Elbow Conetite/Compression x BSPF 20mm (3/4") B08C20C20FI
$6.78 /each

Brass Conetite 15mm x 20mm increasing elbows are used to connect 15mm copper pipe to a 20mm (3/4") male BSP threaded fitting, riser, valve or outlet at 90°. They are commonly used in plumbing, irrigation, water supply and repair work where copper pipe needs to transition to a larger threaded connection without soldering.

Made from DR lead free brass with a brass compression nut and nylon olive, this increasing elbow provides a 15mm compression connection for copper pipe and a 20mm (3/4") female BSP internal thread. Install onto clean, round 15mm copper pipe and use suitable thread sealant or PTFE tape on the BSP threaded connection only.

Brass Conetite Elbow Copper Pipe x Female BSP Specifications

✓ Connection Type
15mm compression x 20mm (3/4") Female BSP connection for connecting copper pipe to a male BSP threaded fitting, riser, valve or outlet.

✓ Material
DR lead free brass body with brass compression nut and nylon olive.

✓ Pipe Compatibility
Designed for use with clean, round 15mm copper pipe on the compression end.

✓ Pressure Rating
Maximum pressure rating 1600kPa, subject to correct installation, compatible pipe and application conditions.

✓ Temperature Range
Working temperature range 1°C to 95°C.

✓ Standards & Approvals
WaterMark Lead Free approved. Tested and certified to AS 3688.

✓ Applications
Suitable for copper pipe in compatible plumbing, irrigation, water supply and general repair applications.

✓ Installation
Cut copper pipe square and ensure the pipe is clean, round and free from burrs. Insert the copper pipe fully into the compression end and tighten the compression nut so the nylon olive compresses onto the pipe. Use suitable thread sealant or PTFE tape on the BSP threaded connection only.

You may also like

Recently viewed