Non-pulsed water meters are used where water usage needs to be measured by manual meter reading without a pulse output connection. This range includes selected threaded multi-jet water meters and larger flanged tangential paddle water meters.
Threaded Zenner MTKD-N models are suitable for cold water measurement in selected male BSP sizes. Larger tangential paddle flanged meters are suitable for irrigation, agricultural and loaded-water measurement applications. Confirm meter size, connection type, flow range and installation requirements before ordering.
Zenner Threaded Water Meter Specifications
Pulsed water meters are used where water usage needs to be measured and a pulse signal is required for compatible remote readout, monitoring equipment, irrigation controllers or data logging systems. This range includes selected threaded multi-jet water meters and larger flanged tangential paddle water meters.
Threaded Zenner MTKD-N models are suitable for cold water measurement in selected male BSP sizes with 10L pulse output. Larger tangential paddle flanged meters are suitable for irrigation, agricultural and loaded-water measurement applications with 100L pulse output. Confirm meter size, connection type, pulse value, flow range and installation requirements before ordering.
Zenner Threaded Water Meter Specifications
Water Meter Netafim Woltman Turbo 50mm flanged is a mechanical bulk water meter used for agricultural, industrial and water supply network applications. The Woltman Silver Turbo WSTsb design is suited to a wide measuring range, making it suitable for installations where both low-flow and high-flow performance need to be considered.
This 50mm model has a Table D flanged connection, cast iron polyester-coated body and AS4747 / NMI 10 Pattern Approval. It is suitable for approved water metering applications, including installations where Murray Darling Basin Pattern Approval requirements need to be considered. Confirm flow range, flange compatibility and installation requirements before ordering.
Netafim Octave 80mm flanged ultrasonic water meter is used for accurate bulk water measurement in agricultural, industrial, commercial and waterworks applications. The ultrasonic design has no moving parts, making it suitable for installations where long-term reliability, low pressure loss and accurate flow data are important.
This DN80 3" model has a flanged connection and stainless steel body construction. It includes a compact digital display built into the meter, IP68 environmental protection and long-life lithium battery power. Confirm flange compatibility, flow range, output requirements and installation conditions before ordering.
HEP2O / WaterLink polybutylene pipe is used for compatible hot and cold water plumbing installations. It forms part of the HEP2O / WaterLink flexible push-fit plumbing system and is used with compatible push-fit fittings, support sleeves and installation tools.
This range includes selected 18mm and 22mm pipe in 5 metre straight lengths and 25 metre coils. Support sleeves are required when connecting polybutylene pipe to HEP2O / WaterLink push-fit fittings. Confirm pipe size, length, pressure-temperature suitability and installation requirements before ordering.
Hep2O / Waterlink Fitting Installation Guide and Specifications
HEP2O / WaterLink support sleeves are inserted into compatible polybutylene pipe before jointing with HEP2O / WaterLink push-fit fittings. They help support the pipe end during connection and are a required system component for correct pipe jointing.
This range includes selected 18mm and 22mm support sleeves for compatible HEP2O / WaterLink pipe systems. Select the sleeve size to match the polybutylene pipe being installed and confirm system compatibility before ordering.
Hep2O / Waterlink Fitting Installation Guide and Specifications
HEP2O / WaterLink push fit couplings are used to join compatible polybutylene pipe in hot and cold water plumbing installations. They are part of the HEP2O / WaterLink push-fit plumbing system and provide equal-size push-fit connections on both sides of the fitting.
This range includes selected 18mm and 22mm couplings for compatible HEP2O / WaterLink pipe systems. Support sleeves are required when connecting polybutylene pipe. Confirm pipe size, system compatibility and installation requirements before ordering.
Hep2O / Waterlink Fitting Installation Guide and Specifications
HEP2O / WaterLink push fit elbows are used to change direction in compatible polybutylene pipe runs for hot and cold water plumbing installations. They are part of the HEP2O / WaterLink push-fit plumbing system and provide equal-size push-fit connections on both sides of the elbow.
This range includes selected 18mm and 22mm equal elbows for compatible HEP2O / WaterLink pipe systems. Support sleeves are required when connecting polybutylene pipe. Confirm pipe size, system compatibility and installation requirements before ordering.
Hep2O / Waterlink Fitting Installation Guide and Specifications
HEP2O / WaterLink push fit tees are used to branch compatible polybutylene pipe in hot and cold water plumbing installations. They are part of the HEP2O / WaterLink push-fit plumbing system and allow a pipe run to be split into three equal-size connections.
This range includes selected 18mm and 22mm equal tees for compatible HEP2O / WaterLink pipe systems. Support sleeves are required when connecting polybutylene pipe. Confirm pipe size, system compatibility and installation requirements before ordering.
Hep2O / Waterlink Fitting Installation Guide and Specifications
HEP2O / WaterLink push fit x female adaptors are used to connect compatible polybutylene pipe to male BSP threaded fittings, valves or outlets in hot and cold water plumbing installations. They are part of the HEP2O / WaterLink push-fit plumbing system and provide a transition from push-fit PB pipe to a female brass thread.
This range includes selected 18mm x 1/2" and 22mm x 3/4" female adaptor sizes. Support sleeves are required when connecting polybutylene pipe. Confirm pipe size, BSP thread size, system compatibility and installation requirements before ordering.
Hep2O / Waterlink Fitting Installation Guide and Specifications
HEP2O / WaterLink push fit x male adaptors are used to connect compatible polybutylene pipe to female BSP threaded fittings, valves or outlets in hot and cold water plumbing installations. They are part of the HEP2O / WaterLink push-fit plumbing system and provide a transition from push-fit PB pipe to a male brass thread.
This range includes selected 18mm x 1/2" and 22mm x 3/4" male adaptor sizes. Support sleeves are required when connecting polybutylene pipe. Confirm pipe size, BSP thread size, system compatibility and installation requirements before ordering.
Hep2O / Waterlink Fitting Installation Guide and Specifications
HEP2O / WaterLink push fit x copper connectors are used to connect compatible polybutylene pipe to copper pipe in hot and cold water plumbing installations. They are part of the HEP2O / WaterLink push-fit plumbing system and are suitable where a PB pipe run needs to transition to copper pipe.
This range includes selected 18mm PB x 15mm copper and 22mm PB x 20mm copper connector sizes. Support sleeves are required when connecting polybutylene pipe. Confirm PB pipe size, copper pipe size, system compatibility and installation requirements before ordering.
Hep2O / Waterlink Fitting Installation Guide and Specifications
HEP2O / WaterLink push fit spigot reducers are used to reduce between compatible polybutylene pipe sizes in hot and cold water plumbing installations. They are part of the HEP2O / WaterLink push-fit plumbing system and are suitable where a pipe run needs to transition down to a smaller size.
This range includes selected 18mm x 15mm and 22mm x 18mm reducers for compatible HEP2O / WaterLink pipe systems. Support sleeves are required when connecting polybutylene pipe. Confirm pipe size, reducer orientation, system compatibility and installation requirements before ordering.
Hep2O / Waterlink Fitting Installation Guide and Specifications
HEP2O / WaterLink push fit male wall elbow 18mm x 1/2" MI brass is used to connect compatible 18mm polybutylene pipe to a fixed 1/2" male BSP threaded outlet point. It is suitable for hot and cold water plumbing installations where a wall-mounted threaded connection is required.
This fitting combines an 18mm push-fit polybutylene pipe connection with a 1/2" male BSP brass thread. Support sleeves are required when connecting polybutylene pipe. Confirm pipe size, thread size, system compatibility and installation requirements before ordering.
Hep2O / Waterlink Fitting Installation Guide and Specifications
HEP2O / WaterLink pipe clips are used to support and secure compatible polybutylene pipe in hot and cold water plumbing installations. They help keep pipe runs positioned correctly where the clip size suits the pipe being installed.
This range includes selected 18mm and 22mm pipe clips for compatible HEP2O / WaterLink pipe systems. Confirm the correct pipe size, fixing method, installation layout and relevant plumbing requirements before ordering.
Hep2O / Waterlink Fitting Installation Guide and Specifications
Brass hot water system flow meter valve lead free 15mm is used in compatible hot water system installations where adjustable flow and an easy-to-read flow gauge are required. It is suitable for solar applications where the valve connection, pressure rating, temperature rating and flow range suit the system requirements.
This LOGI Valve flow meter has an Rp 1/2" connection, DR lead free brass body, ball and spindle, PTFE seal, FKM O-ring and PET flow gauge. It is WaterMark Lead Free approved, tested and certified to WMTS012, rated to 1000kPa maximum pressure and suitable for temperatures up to 110°C.
Flexi hoses 15mm BSP female x female are used for plumbing water connections where a flexible braided hose is required between compatible threaded fittings, taps, valves, cisterns or fixtures. This range includes selected 225mm, 300mm, 450mm and 600mm lengths.
These FI x FI flexi hoses have G 1/2" female swivel connections, a PEX inner core and 304 stainless steel braided outer construction. They are Watermarked approved, rated to 1000kPa working pressure and suitable for installations up to 80°C maximum working temperature.