Hep2O/Waterlink Push Fit x Male Adaptor, 18mm x 1/2" MI Brass
Hep2O/Waterlink Push Fit x Male Adaptor, 18mm x 1/2" MI Brass

HEP2O / WATERLINK PUSH FIT X MALE ADAPTORS

HEP2O / WaterLink push fit x male adaptors connect compatible polybutylene pipe to female BSP threaded fittings, valves or outlets in hot and cold water plumbing installations.

✓ Push Fit x Male BSP Adaptors
✓ Selected 18mm x 1/2" & 22mm x 3/4" Sizes
✓ Male Brass Thread
✓ Suits HEP2O / WaterLink Pipe Systems
✓ Hot and Cold Water Reticulation
✓ Support Sleeve Required for PB Pipe Connection

Hep2O / Waterlink Fitting Installation Guide and Specifications

More Information
Product Specifications
Hep2O/Waterlink Push Fit x Male Adaptor, 18mm x 1/2" MI Brass
HEP2O / WATERLINK PUSH FIT X MALE ADAPTORS
Hep2O/Waterlink Push Fit x Male Adaptor, 18mm x 1/2" MI Brass
Hep2O/Waterlink Push Fit x Male Adaptor, 18mm x 1/2" MI Brass CRH2OPFMA1812MB
$7.16 /each
Hep2O/Waterlink Push Fit x Male Adaptor, 22mm x 3/4" MI Brass
Hep2O/Waterlink Push Fit x Male Adaptor, 22mm x 3/4" MI Brass CRH2OPFMA2234MB
$10.58 /each

HEP2O / WaterLink push fit x male adaptors are used to connect compatible polybutylene pipe to female BSP threaded fittings, valves or outlets in hot and cold water plumbing installations. They are part of the HEP2O / WaterLink push-fit plumbing system and provide a transition from push-fit PB pipe to a male brass thread.

This range includes selected 18mm x 1/2" and 22mm x 3/4" male adaptor sizes. Support sleeves are required when connecting polybutylene pipe. Confirm pipe size, BSP thread size, system compatibility and installation requirements before ordering.

Hep2O / Waterlink Fitting Installation Guide and Specifications

✓ Product Type & Size
HEP2O / WaterLink push fit x male adaptors available in selected 18mm x 1/2" and 22mm x 3/4" sizes.

✓ Connection
Push-fit PB pipe connection x male BSP brass thread.

✓ System Compatibility
Suitable for compatible HEP2O / WaterLink polybutylene pipe systems.

✓ Catalogue References
18mm x 1/2": HEP29.18 / WLP29.18.
22mm x 3/4": HEP29.22 / WLP29.22.

✓ Application
Suitable for hot and cold water plumbing installations where the PB pipe size, BSP thread size, pressure rating and temperature rating suit the installation.

✓ Support Sleeve Requirement
Support sleeves are required when connecting polybutylene pipe.

✓ Installation Note
Use purpose-designed pipe cutters, ensure the PB pipe end is clean and free from burrs, insert the correct support sleeve, push the pipe fully into the fitting and tug back to confirm the grab ring has engaged.

✓ Compliance Note
Install in accordance with AS/NZS 3500 and relevant local plumbing requirements.

You may also like

Recently viewed