Brass Union Conetite 3/4"" (20mm)
Brass Union Conetite 3/4"" (20mm)

BRASS CONETITE UNION 20MM (3/4") COMPRESSION X COMPRESSION FOR COPPER PIPE

Brass Conetite 20mm compression union used to connect two compatible 20mm tube ends in a straight line. Suitable for water, air, irrigation and general plumbing applications.

✓ 20mm Compression x Compression Connection
✓ Nylon Olives Included
✓ DR Lead Free Brass Body
✓ WaterMark Lead Free Approved
✓ Tested and Certified to AS 3688
✓ 1600kPa Maximum Pressure Rating

Brass Conetite Compression Union Specifications

Brass Union Conetite 3/4"" (20mm)
Brass Union Conetite 1" (25mm)
Brass Union Conetite 1" (25mm) B12BU02525
$15.69 /each

Brass Conetite 20mm compression unions are used to join two 20mm copper pipe ends in a straight line using a mechanical nylon olive compression connection. They are commonly used in plumbing, irrigation, water supply and repair work where copper pipe needs to be joined without soldering.

Made from DR lead free brass with brass compression nuts and nylon olives, this union is WaterMark Lead Free approved and tested to AS 3688. Install onto clean, round 20mm copper pipe and tighten the compression nuts so the nylon olives compress onto the pipe.

Brass Conetite Compression Union Copper Pipe Specifications

✓ Product Type & Size
20mm (3/4") brass Conetite compression union for copper pipe.

✓ Connection Type
Compression x Compression connection for joining two 20mm copper pipe ends in a straight line.

✓ Material
DR lead free brass body with brass compression nuts and nylon olives.

✓ Pipe Compatibility
Designed for use with clean, round 20mm copper pipe.

✓ Pressure Rating
Maximum pressure rating 1600kPa, subject to correct installation, compatible pipe and application conditions.

✓ Temperature Range
Working temperature range 1°C to 95°C.

✓ Standards & Approvals
WaterMark Lead Free approved. Tested and certified to AS 3688.

✓ Applications
Suitable for copper pipe in compatible plumbing, irrigation, water supply and general repair applications.

✓ Installation
Cut copper pipe square and ensure the pipe is clean, round and free from burrs. Insert the copper pipe fully into the fitting and tighten the compression nuts so the nylon olives compress onto the pipe. Do not use thread tape on the compression olive section.

You may also like

Recently viewed