Brass Elbow Conetite/Compression 25mm (1")
Brass Elbow Conetite/Compression 25mm (1")

BRASS CONETITE ELBOW 90° 25MM (1") COMPRESSION X COMPRESSION FOR COPPER PIPE

Brass Conetite 25mm compression elbow used to change direction between two compatible 25mm tube runs. Suitable for water, air, irrigation and general plumbing applications.

✓ 25mm Compression x Compression Connection
✓ 90° Elbow Fitting
✓ Nylon Olives Included
✓ DR Lead Free Brass Body
✓ WaterMark Lead Free Approved
✓ 1600kPa Maximum Pressure Rating

Brass Conetite Compression Elbow Copper Pipe Specifications

Brass Elbow Conetite/Compression 25mm (1")

Brass Conetite 25mm compression elbows are used to change direction between two 25mm copper pipe runs using a mechanical nylon olive compression connection. They are commonly used in plumbing, irrigation, water supply and repair work where copper pipe needs to be redirected without soldering.

Made from DR lead free brass with brass compression nuts and nylon olives, this elbow is WaterMark Lead Free approved and tested to AS 3688. Install onto clean, round 25mm copper pipe and tighten the compression nuts so the nylon olives compress onto the pipe.

Brass Conetite Compression Elbow Copper Pipe Specifications

✓ Product Type & Size
25mm (1") brass Conetite 90° compression elbow for copper pipe.

✓ Connection Type
Compression x Compression 90° elbow connection for changing direction between two 25mm copper pipe runs.

✓ Material
DR lead free brass body with brass compression nuts and nylon olives.

✓ Pipe Compatibility
Designed for use with clean, round 25mm copper pipe.

✓ Pressure Rating
Maximum pressure rating 1600kPa, subject to correct installation, compatible pipe and application conditions.

✓ Temperature Range
Working temperature range 1°C to 95°C.

✓ Standards & Approvals
WaterMark Lead Free approved. Tested and certified to AS 3688.

✓ Applications
Suitable for copper pipe in compatible plumbing, irrigation, water supply and general repair applications.

✓ Installation
Cut copper pipe square and ensure the pipe is clean, round and free from burrs. Insert the copper pipe fully into the fitting and tighten the compression nuts so the nylon olives compress onto the pipe. Do not use thread tape on the compression olive section.

You may also like

Recently viewed