Brass Lugged Elbow Conetite/Compression x BSPF 20mm (3/4")
Brass Lugged Elbow Conetite/Compression x BSPF 20mm (3/4")

BRASS CONETITE LUGGED ELBOW 90° 20MM (3/4") COMPRESSION X FEMALE BSP FOR COPPER PIPE

Brass Conetite 20mm lugged elbow used to connect 20mm copper pipe to a 20mm (3/4") female BSP wall outlet point at 90° without soldering.

✓ For 20mm Copper Pipe
✓ 20mm Compression x 20mm Female BSP
✓ Lugged 90° Wall Elbow
✓ Nylon Olive Included
✓ DR Lead Free Brass Body
✓ 1600kPa Maximum Pressure Rating

Brass Conetite Lugged Elbow Copper Pipe x Female BSP Specifications

More Information
Product Specifications
Brass Lugged Elbow Conetite/Compression x BSPF 20mm (3/4")
BRASS CONETITE LUGGED ELBOW 90° 20MM (3/4") COMPRESSION X FEMALE BSP FOR COPPER PIPE
Brass Lugged Elbow Conetite/Compression x BSPF 15mm (1/2")
Brass Lugged Elbow Conetite/Compression x BSPF 15mm (1/2") B08C1515L
$5.34 /each
Brass Lugged Elbow Conetite/Compression x BSPF 20mm (3/4")
Brass Lugged Elbow Conetite/Compression x BSPF 20mm (3/4") B08C2020L
$9.26 /each

Brass Conetite 20mm lugged elbows are used to connect 20mm copper pipe to a 20mm (3/4") female BSP wall outlet point at 90° using a mechanical nylon olive compression connection. They are commonly used in plumbing, irrigation, water supply and repair work where copper pipe needs to finish at a fixed threaded outlet without soldering.

Made from DR lead free brass with a brass compression nut and nylon olive, this lugged elbow is WaterMark Lead Free approved and tested to AS 3688. Install onto clean, round 20mm copper pipe on the compression end and fix the lugged body securely before connecting a compatible male BSP threaded fitting.

Brass Conetite Lugged Elbow Copper Pipe x Female BSP Specifications

✓ Product Type & Size
20mm (3/4") brass Conetite lugged 90° elbow for copper pipe.

✓ Connection Type
20mm compression x 20mm (3/4") Female BSP lugged elbow connection for connecting copper pipe to a fixed threaded wall outlet point.

✓ Material
DR lead free brass body with brass compression nut and nylon olive.

✓ Pipe Compatibility
Designed for use with clean, round 20mm copper pipe on the compression end.

✓ Pressure Rating
Maximum pressure rating 1600kPa, subject to correct installation, compatible pipe and application conditions.

✓ Temperature Range
Working temperature range 1°C to 95°C.

✓ Standards & Approvals
WaterMark Lead Free approved. Tested and certified to AS 3688.

✓ Applications
Suitable for copper pipe in compatible plumbing, irrigation, water supply and general repair applications.

✓ Installation
Cut copper pipe square and ensure the pipe is clean, round and free from burrs. Insert the copper pipe fully into the compression end and tighten the compression nut so the nylon olive compresses onto the pipe. Secure the lugged body before connecting a compatible male BSP threaded fitting. Use suitable thread sealant or PTFE tape on the BSP threaded connection only.

You may also like

Recently viewed