Compression Poly Metric End Connector- Poly x FI BSP - 63 mm x 2" - Norma
Compression Poly Metric End Connector- Poly x FI BSP - 63 mm x 2" - Norma

POLY COMPRESSION METRIC END CONNECTORS POLY X FEMALE BSP - NORMA

Poly compression metric end connectors connect PE metric pipe to male BSP threaded fittings, risers, valves and pipework.

✓ Poly x Female BSP Connection
✓ Suits PE Metric Pipe
✓ WaterMark Approved
✓ UV Stabilised
✓ Reinforcing Ring Fitted
✓ Pressure Rated by Size

Norma Metric Compression Fittings Brochure

More Information
Product Specifications
Compression Poly Metric End Connector- Poly x FI BSP - 63 mm x 2" - Norma
POLY COMPRESSION METRIC END CONNECTORS POLY X FEMALE BSP - NORMA
Compression Poly Metric End Connector- Poly x FI BSP - 63 mm x 2" - Norma
Compression Poly Metric End Connector- Poly x FI BSP - 63 mm x 2" - Norma CONMECF0632
$25.44 /each
Compression Poly Metric End Connector- Poly x FI BSP - 75 mm x 2" - Norma
Compression Poly Metric End Connector- Poly x FI BSP - 75 mm x 2" - Norma CONMECF0752
$46.69 /each
Compression Poly Metric End Connector- Poly x FI BSP - 90 mm x 3" - Norma
Compression Poly Metric End Connector- Poly x FI BSP - 90 mm x 3" - Norma CONMECF0903
$67.40 /each
Compression Poly Metric End Connector- Poly x FI BSP - 110 mm x 4" - Norma
Compression Poly Metric End Connector- Poly x FI BSP - 110 mm x 4" - Norma CONMECF1104
$125.71 /each

Poly compression metric end connectors poly x female BSP are used to connect PE metric pipe to male BSP threaded fittings, risers, valves and pipework. They provide a metric compression connection on the poly pipe side and a female BSP threaded connection on the outlet side.

This NORMA range includes the listed 63mm x 2", 75mm x 2", 90mm x 3" and 110mm x 4" sizes. NORMA metric compression fittings suit PE metric pipe made in accordance with AS/NZS 4130 and use blue metric identification ends for easy selection. Pressure rating is size based, with 63mm rated to 1600kPa and 75mm to 110mm rated to 1250kPa. Confirm the pipe size, thread size, pressure rating and application requirements before ordering.

Norma Metric Compression Fittings Brochure

✓ Product Type & Size
Poly compression metric end connectors poly x female BSP, available in the listed 63mm x 2", 75mm x 2", 90mm x 3" and 110mm x 4" sizes.

✓ Connection
Poly compression metric x female BSP threaded connection.

✓ Application
Used to connect PE metric pipe to male BSP threaded fittings, risers, valves and pipework.

✓ Pipe Compatibility
Suitable for PE metric pipe made in accordance with AS/NZS 4130.

✓ Pressure Rating
63mm: 1600kPa. 75mm to 110mm: 1250kPa.

✓ Approval
WaterMark approved.

✓ Installation
Cut pipe square, deburr if required, mark the insertion depth, insert the pipe fully and tighten the nut until the mark is only just visible. Use PTFE tape or suitable thread sealant on BSP threaded connections.

✓ Material
Polypropylene copolymer body, nut and holder with NBR metric O-ring and acetal clinching ring.

✓ Reinforcing Ring
304 stainless steel reinforcing ring fitted to the female BSP threaded connection.

✓ Suitable Use
Suitable for irrigation, rural water, mains water connection and general PE metric pipe systems where the fitting size, thread size, pressure rating and installation requirements suit the application.

You may also like

Recently viewed