Compression Poly Metric Tee- Poly x Poly x Poly - 63mm x 63mm x 63mm - Norma
Compression Poly Metric Tee- Poly x Poly x Poly - 63mm x 63mm x 63mm - Norma

POLY COMPRESSION METRIC TEES POLY X POLY X POLY - NORMA

Poly compression metric tees are used to create a branch from a PE metric pipe run. Suitable for irrigation, rural water, mains water connection and general PE metric systems.

✓ Poly x Poly x Poly Tee
✓ Suits PE Metric Pipe
✓ WaterMark Approved
✓ UV Stabilised
✓ Blue Metric Identification Ends
✓ Pressure Rated by Size

Norma Metric Compression Fittings Brochure

More Information
Product Specifications
Compression Poly Metric Tee- Poly x Poly x Poly - 63mm x 63mm x 63mm - Norma
POLY COMPRESSION METRIC TEES POLY X POLY X POLY - NORMA
Compression Poly Metric Tee- Poly x Poly x Poly - 63mm x 63mm x 63mm - Norma
Compression Poly Metric Tee- Poly x Poly x Poly - 63mm x 63mm x 63mm - Norma CONMT0636363
$52.45 /each
Compression Poly Metric Tee- Poly x Poly x Poly - 75 mm x 75 mm x 75 mm - Norma
Compression Poly Metric Tee- Poly x Poly x Poly - 75 mm x 75 mm x 75 mm - Norma CONMT0757575
$98.76 /each
Compression Poly Metric Tee- Poly x Poly x Poly - 90 mm x 90 mm x 90 mm - Norma
Compression Poly Metric Tee- Poly x Poly x Poly - 90 mm x 90 mm x 90 mm - Norma CONMT0909090
$144.46 /each
Compression Poly Metric Tee- Poly x Poly x Poly - 110 mm x 110 mm x 110 mm - Norma
Compression Poly Metric Tee- Poly x Poly x Poly - 110 mm x 110 mm x 110 mm - Norma CONMT110110110
$263.88 /each

Poly compression metric tees poly x poly x poly are used to connect three lengths of PE metric pipe, creating a branch from a main pipe run. They provide metric compression connections on all three sides for irrigation, rural water, mains water connection and general PE pipe systems.

This NORMA range includes the listed 63mm x 63mm x 63mm, 75mm x 75mm x 75mm, 90mm x 90mm x 90mm and 110mm x 110mm x 110mm sizes. NORMA metric compression fittings suit PE metric pipe made in accordance with AS/NZS 4130 and use blue metric identification ends for easy selection. Pressure rating is size based, with 63mm rated to 1600kPa and 75mm to 110mm rated to 1250kPa. Confirm the pipe size, pressure rating and application requirements before ordering.

Norma Metric Compression Fittings Brochure

✓ Product Type & Size
Poly compression metric tees poly x poly x poly, available in the listed 63mm, 75mm, 90mm and 110mm equal-size connections.

✓ Connection
Poly x poly x poly metric compression tee.

✓ Application
Used to connect three lengths of PE metric pipe and create a branch from a main pipe run.

✓ Pipe Compatibility
Suitable for PE metric pipe made in accordance with AS/NZS 4130.

✓ Pressure Rating
63mm: 1600kPa. 75mm to 110mm: 1250kPa.

✓ Approval
WaterMark approved.

✓ Installation
Cut pipe square, deburr if required, mark the insertion depth, insert the pipe fully and tighten the nut until the mark is only just visible.

✓ Material
Polypropylene copolymer body, nut and holder with NBR metric O-ring and acetal clinching ring.

✓ Suitable Use
Suitable for irrigation, rural water, mains water connection and general PE metric pipe systems where the fitting size, pressure rating and installation requirements suit the application.

You may also like

Recently viewed