Compression Poly Metric End Connector- Poly x MI BSP - 63 mm x 2" - Norma
Compression Poly Metric End Connector- Poly x MI BSP - 63 mm x 2" - Norma

POLY COMPRESSION METRIC END CONNECTORS POLY X MALE BSP - NORMA

Poly compression metric end connectors connect PE metric pipe to female BSP threaded fittings, valves, outlets and equipment.

✓ Poly x Male BSP Connection
✓ Suits PE Metric Pipe
✓ WaterMark Approved
✓ UV Stabilised
✓ Blue Metric Identification Ends
✓ Pressure Rated by Size

Norma Metric Compression Fittings Brochure

More Information
Product Specifications
Compression Poly Metric End Connector- Poly x MI BSP - 63 mm x 2" - Norma
POLY COMPRESSION METRIC END CONNECTORS POLY X MALE BSP - NORMA
Compression Poly Metric End Connector- Poly x MI BSP - 63 mm x 2" - Norma
Compression Poly Metric End Connector- Poly x MI BSP - 63 mm x 2" - Norma CONMECM0632
$19.75 /each
Compression Poly Metric End Connector- Poly x MI BSP - 75 mm x 2" - Norma
Compression Poly Metric End Connector- Poly x MI BSP - 75 mm x 2" - Norma CONMECM0752
$46.91 /each
Compression Poly Metric End Connector- Poly x MI BSP - 90 mm x 3" - Norma
Compression Poly Metric End Connector- Poly x MI BSP - 90 mm x 3" - Norma CONMECM0903
$67.40 /each
Compression Poly Metric End Connector- Poly x MI BSP - 110 mm x 4" - Norma
Compression Poly Metric End Connector- Poly x MI BSP - 110 mm x 4" - Norma CONMECM1104
$112.03 /each

Poly compression metric end connectors poly x male BSP are used to connect PE metric pipe to female BSP threaded fittings, valves, outlets and equipment. They provide a metric compression connection on the poly pipe side and a male BSP threaded connection on the outlet side.

This NORMA range includes the listed 63mm x 2", 75mm x 2", 90mm x 3" and 110mm x 4" sizes. NORMA metric compression fittings suit PE metric pipe made in accordance with AS/NZS 4130 and use blue metric identification ends for easy selection. Pressure rating is size based, with 63mm rated to 1600kPa and 75mm to 110mm rated to 1250kPa. Confirm the pipe size, thread size, pressure rating and application requirements before ordering.

Norma Metric Compression Fittings Brochure

✓ Product Type & Size
Poly compression metric end connectors poly x male BSP, available in the listed 63mm x 2", 75mm x 2", 90mm x 3" and 110mm x 4" sizes.

✓ Connection
Poly compression metric x male BSP threaded connection.

✓ Application
Used to connect PE metric pipe to female BSP threaded fittings, valves, outlets and equipment.

✓ Pipe Compatibility
Suitable for PE metric pipe made in accordance with AS/NZS 4130.

✓ Pressure Rating
63mm: 1600kPa. 75mm to 110mm: 1250kPa.

✓ Approval
WaterMark approved.

✓ Installation
Cut pipe square, deburr if required, mark the insertion depth, insert the pipe fully and tighten the nut until the mark is only just visible. Use PTFE tape or suitable thread sealant on BSP threaded connections.

✓ Material
Polypropylene copolymer body, nut and holder with NBR metric O-ring and acetal clinching ring.

✓ Suitable Use
Suitable for irrigation, rural water, mains water connection and general PE metric pipe systems where the fitting size, thread size, pressure rating and installation requirements suit the application.

You may also like

Recently viewed