Compression Poly Metric End Connector- Poly x MI BSP - 90 mm x 3" - Norma
Compression Poly Metric End Connector- Poly x MI BSP - 90 mm x 3" - Norma

POLY COMPRESSION METRIC END CONNECTOR POLY X MALE BSP 90MM X 3" - NORMA

Poly compression metric end connector 90mm x 3" - NORMA connects 90mm PE metric pipe to a 3" female BSP threaded fitting.

✓ 90mm Poly x 3" Male BSP
✓ Suits PE Metric Pipe
✓ WaterMark Approved
✓ UV Stabilised
✓ Pressure Rating 1250kPa
✓ Check Pipe and Thread Size Before Ordering

Norma Metric Compression Fittings Brochure

More Information
Product Specifications
Compression Poly Metric End Connector- Poly x MI BSP - 90 mm x 3" - Norma
POLY COMPRESSION METRIC END CONNECTOR POLY X MALE BSP 90MM X 3" - NORMA
Compression Poly Metric End Connector- Poly x MI BSP - 63 mm x 2" - Norma
Compression Poly Metric End Connector- Poly x MI BSP - 63 mm x 2" - Norma CONMECM0632
$19.75 /each
Compression Poly Metric End Connector- Poly x MI BSP - 75 mm x 2" - Norma
Compression Poly Metric End Connector- Poly x MI BSP - 75 mm x 2" - Norma CONMECM0752
$46.91 /each
Compression Poly Metric End Connector- Poly x MI BSP - 90 mm x 3" - Norma
Compression Poly Metric End Connector- Poly x MI BSP - 90 mm x 3" - Norma CONMECM0903
$67.40 /each
Compression Poly Metric End Connector- Poly x MI BSP - 110 mm x 4" - Norma
Compression Poly Metric End Connector- Poly x MI BSP - 110 mm x 4" - Norma CONMECM1104
$112.03 /each

Poly compression metric end connector poly x male BSP 90mm x 3" - NORMA is used to connect 90mm PE metric pipe to a 3" female BSP threaded fitting, valve, outlet or piece of equipment. It provides a metric compression connection on the poly pipe side and a 3" male BSP threaded outlet.

This 90mm x 3" NORMA metric end connector suits PE metric pipe made in accordance with AS/NZS 4130. It uses blue metric identification ends and an easy insertion compression design. The 90mm size is rated to 1250kPa. Confirm the pipe size, thread size, pressure rating and application requirements before ordering.

Norma Metric Compression Fittings Brochure

✓ Product Type & Size
Poly compression metric end connector, poly x male BSP, 90mm x 3".

✓ Connection
90mm metric compression x 3" male BSP threaded connection.

✓ Application
Used to connect 90mm PE metric pipe to a 3" female BSP threaded fitting, valve, outlet or piece of equipment.

✓ Pipe Compatibility
Suitable for PE metric pipe made in accordance with AS/NZS 4130.

✓ Pressure Rating
1250kPa.

✓ Approval
WaterMark approved.

✓ Installation
Cut pipe square, deburr if required, mark the insertion depth, insert the pipe fully and tighten the nut until the mark is only just visible. Use PTFE tape or suitable thread sealant on the BSP threaded connection.

✓ Material
Polypropylene copolymer body, nut and holder with NBR metric O-ring and acetal clinching ring.

✓ Suitable Use
Suitable for irrigation, rural water, mains water connection and general PE metric pipe systems where the fitting size, thread size, pressure rating and installation requirements suit the application.

You may also like

Recently viewed