Tools Anchor Marking Spray Paint Pink 350g
Tools Anchor Marking Spray Paint Pink 350g

MARKING PAINTS

Anchor Spot n Survey marking paint makes visible spots and lines for setting out irrigation, landscaping and other site work. It works on grass, soil and hard surfaces such as concrete and bitumen. The can sprays upside down through its protective cap, making it easy to mark the ground before installation.

✓ Can size: 350g
✓ Sprays upside down
✓ For grass, soil and hard surfaces
✓ For spot marks and lines

Anchor Spot n Survey Marking Paint Specifications
Anchor Spot n Survey Marking Paint Safety Data Sheet

More Information
Product Specifications
Tools Anchor Marking Spray Paint Pink 350g
MARKING PAINTS
Tools Anchor Marking Spray Paint Pink 350g
Tools Anchor Marking Spray Paint Pink 350g TMSPP
$10 /each
Tools Anchor Marking Spray Paint White 350g
Tools Anchor Marking Spray Paint White 350g TMSPW
$10 /each
Anchor Spot n Survey yellow marking spray paint 350g AS10
Tools Anchor Marking Spray Paint Yellow 350g TMSPY
$10 /each
Tools Anchor Marking Spray Paint Blue 350g
Tools Anchor Marking Spray Paint Blue 350g TMSPB
$10 /each

Anchor Spot n Survey is a quick-drying marking paint for identifying positions and marking out work areas. It is useful for setting out sprinkler positions, planned pipe routes and landscaping layouts before installation.

The paint can be used on grass, concrete, bitumen, soil, timber, rock, gravel and steel. Sweep away loose dirt before spraying and cover nearby surfaces to protect them from overspray.

The can sprays upside down through a protective cap. Press the valve to make a spot or move the can along to mark a line. Moving closer to or further from the surface changes the spray width.

After use, turn the can upright and spray until clear gas comes out to clear the nozzle, then wipe it clean.

Anchor Spot n Survey Marking Paint Specifications
Anchor Spot n Survey Marking Paint Safety Data Sheet

✓ Colour Options
Pink: Fluorescent.
Blue: Fluorescent.
White: Non-fluorescent.
Yellow: Non-fluorescent.

✓ Paint & Application
Anchor Mark Spot n Survey aerosol marking paint.
Can size: 350g.
For spot marks and lines during surveying, landscaping and site work.
Spray direction: Upside down through the protective cap.

✓ Suitable Surfaces
Grass, concrete, bitumen, soil, timber, rock, gravel and steel.

✓ Surface Preparation
Sweep away loose dirt and other loose material before spraying.
Cover nearby surfaces to protect them from overspray.

✓ Application
Shake vigorously for one minute after the mixing ball is heard; shake occasionally during use.
Hold the can upside down, approximately 10-15cm from the surface, and press the valve.
Spray width changes with the distance from the surface.
Ideal application temperature: -10°C to +30°C.
Avoid windy or dusty conditions.

✓ Drying
Touch dry: Approximately five minutes at 25°C and relative humidity below 50%.
Allow longer in cold or humid conditions.

✓ Coverage
Over 200 X marks or up to 150 linear metres per can.
Coverage varies with the surface and colour used.

✓ After Use
Turn the can upright and press the valve until clear gas comes out to clear the nozzle.
Wipe the nozzle clean.

✓ Storage & Shelf Life
Recommended storage temperature: 15-30°C.
Store away from sunlight, heat and ignition sources.
Minimum shelf life: Two years when stored as specified.

✓ Safety
Extremely flammable aerosol; keep away from heat, sparks and flames.
Use outdoors or in a well-ventilated area; avoid breathing spray and contact with skin and eyes.
Follow the safety data sheet for protective equipment and handling.
Protect from sunlight; do not expose the can to temperatures above 50°C.
Avoid release into drains and waterways.
Dangerous goods: UN 1950, Class 2.1.

You may also like

Recently viewed