Poly 15mm riser adaptors are used to connect, adapt or extend 15mm threaded sprinkler, riser and pipework connections in irrigation systems. They are suitable for residential, commercial and landscape irrigation where a 15mm female BSP thread needs to connect to a 15mm male BSP threaded riser, sprinkler or fitting.
This adaptor has a 15mm (1/2") Female BSP connection on one end and a 15mm (1/2") Male BSP connection on the other. The UV stabilised poly construction is designed for outdoor irrigation use with compatible threaded fittings.
Poly articulated risers are used to connect and position sprinklers in irrigation systems where some adjustment is required between the pipework and sprinkler. They are suitable for residential, commercial and landscape irrigation where a more flexible riser connection is preferred over a straight fixed riser.
This 15mm x 225mm articulated poly riser has 15mm (1/2") male BSP threaded connections and a 225mm body length. The UV stabilised poly construction is designed for outdoor irrigation use and is resistant to weather, termites, fungi and bacteria.
Poly riser couplings are used to connect two male BSP threaded risers, fittings or pipework connections in irrigation systems. They are suitable for residential, commercial and rural irrigation where a female x female threaded joiner is required.
These couplings have Female BSP threaded connections on both ends and are suitable for use with compatible poly, PVC and threaded irrigation fittings. The UV stabilised construction is designed for outdoor irrigation use and long-term installation.
Poly Riser Removal Tool
for 15mm and 20mm Risers
Hunter swing joint risers are used to connect pop-up sprinklers to irrigation pipework while allowing the sprinkler height and position to be adjusted during installation. They are suitable for residential and commercial irrigation systems where a flexible preassembled swing joint is preferred over a rigid riser.
The Hunter SJ Swing Joint range is preassembled with four swing elbows, helping reduce stress on sprinkler connections and making sprinkler positioning easier during installation and servicing. This range is commonly used where sprinklers need to be set to the correct finished height or adjusted after installation.
Poly rural tapping saddles are used to create a Female BSP threaded take-off from rural PE pipe without cutting out the main pipe section. They are commonly used for rural water supply, stock water, irrigation and general farm water systems where a branch, riser, valve or threaded outlet needs to be added to an existing rural poly pipe line.
This range includes single-bolt and double-bolt rural tapping saddles in selected pipe and Female BSP thread sizes. Single-bolt models use a hinged saddle design to help with clamping around rural pipe, including installations in narrow trenches. Rural tapping saddles are suitable for above or below ground installation, provided the pipe surface is clean and un-scoured before fitting. Confirm the pipe size, thread size, bolt configuration and system pressure before ordering.
Video 1
Poly female threaded sockets are used to connect two male BSP threaded fittings, pipe ends or threaded components. They are suitable for irrigation, rural water, plumbing and general water systems where a straight female-to-female threaded join is required.
Made from UVB stabilised glass fibre reinforced Nylon 6, these sockets provide female BSP threaded connections at both ends. Use Teflon thread tape or a suitable sealing compound when installing male BSP threads into the socket.
Poly sprinkler nipples are used to connect sprinklers, compatible threaded irrigation fittings in landscape irrigation systems. They are suitable for residential and light duty irrigation installations where a simple 15mm male threaded sprinkler connection is required.
This light duty sprinkler nipple has 15mm (1/2") male BSP threaded connections and is designed for use with compatible sprinklers, risers, fittings and pipework. Use suitable thread tape or thread sealant during installation and avoid over-tightening plastic threaded fittings.
Poly Water Tanks
Our poly water tanks are designed for reliable water storage across residential, agricultural and rural applications. Manufactured from high quality UV stabilised polyethylene, these tanks provide long term durability in Australian conditions and are available in a wide range of sizes and colours to suit different installations.
A delivery fee of $88.00 incl. GST applies to all Urban / Residential tanks (320L to 3,700L) delivered directly to customers within 800 km of Canning Vale.
Tanks are made to order and can be customised with preferred outlet positions and colour selections. Simply include your requirements in the comments section when placing your order, and our team will contact you to confirm lead times, delivery access and installation considerations.
STANDARD AGRICULTURAL RANGE FITTINGS
- Brass outlet with poly ball valve up to 40 mm (1½") for tanks 4,500L to 10,000L
- Brass outlet with poly ball valve up to 50 mm (2") for tanks 14,000L to 50,000L
- 90 mm overflow
- Leaf strainer and screw top lid
STANDARD RESIDENTIAL RANGE FITTINGS
- 19 mm outlet tap
- 50 mm overflow for 320L to 1,500L tanks
- 19 mm drain bung
- 90 mm overflow for 2,500L to 3,700L tanks
- Leaf strainer
Where a tank size is not specifically mentioned, the listed fittings are included as standard across all applicable tank sizes. Fittings larger than standard specifications may be supplied at additional cost.
RURAL TANKS
All rural tanks include a brass outlet and gate valve up to 50 mm, 90 mm overflow, leaf strainer or screw top lid, and are backed by a 20 year written warranty.
URBAN / RESIDENTIAL TANKS
Urban tanks include a lockable 19 mm outlet tap, mosquito proof overflow (50 mm for 720L and 1,500L tanks, 90 mm for 2,500L and 3,000L tanks), 19 mm drain bung and a leaf strainer.
DOWNLOADS
Manifold Fittings
Manifold fittings provide easy installation and quick disassemly for maintenance of irrigation valves. The swivel fitting with pre-installed o-ring means no thread tape and no tools required - hand tighten only.
Made with reliability, long life and durability in mind.
Product Specifications - 3 and 4 Port Manifolds
Product Specifications - Manifold Fittings
Poly female threaded tees are used to create a branch connection from BSP threaded pipework, fittings and valve assemblies. They are suitable for irrigation, rural water, plumbing and general water systems where a threaded line needs to be split or branched.
Made from UVB stabilised glass fibre reinforced Nylon 6, these tees provide female BSP threaded connections on all three outlets. Use Teflon thread tape or a suitable sealing compound when installing male BSP threads into the tee.
Pond Filter - Oase Biopress
This pressure filter sets consist of one Biopress pressure filter with integrated UVC and a matching filter/ watercourse pump with all necessary hose connections for quick assembly.
Easy filter maintenance is achieved using the cleaning function built into the filter.
The filter consists of 3 different filter media to ensure clear water – all this at an extremely attractive price.
These sets are not recommended for koi ponds or heavily stocked fish ponds.
Pond Pump - Oase Aquamax
Aquamax pumps can reliably feed waterwalls, watercourses or transport pond water to a biological filters. Thanks to the energy - efficient EC motor the AquaMax Eco Classic saves power and money in operation. They have been reliable partners in the pond environment for many years.
Features
- The large surface wrap around strainer allows coarse debris particles like fish waste or dead plants up to 6 mm to pass through
- The efficient motor is particularly economical and effectively reduces running costs
- Includes a special stepped hose adapter with the sizes ¾", 1", 1¼", and 1½" with a threaded collar
- Thanks to organic design, it can be integrated in ponds and watercourses, almost invisibly
- Rated voltage 220 - 240 V / 50Hz
The Oase Aquamax Eco Classic offers a 3-year guarantee
Pond Pump - Oase Aquarius Fountain Set
Fountains in the garden pond made easy - here you have an easy start and can enjoy your new fountain in the garden pond in no time. Water fountains create life in the garden, not only from the sounds and movement of the water, but also a three dimensional focal point within the display on the landscape.
- Fountain Pump
- Simply compact: Easy-to-install in water features with versatile effects
- Second adjustable outlet (1/2" to 1")
- Includes 3 different fountain heads (Vulkan, Lava and Magma).
- Individual alignment of fountain via the telescopic extension and 15° swivel head.
- Base Footings for stable positioning onto the pond floor
- Integrated thermal protection.
- Rated voltage 220- 240 V / 50Hz
The Oase Aquarius pump offers a 2 year guarantee, which can be extended by an additional 1 year (total 3 year guarantee), upon registration on the Clearpond website: Register Your Purchase
Pond Pump - Oase Aquarius Universal
With the Aquarius Universal range of pumps, ideal for fountains and water features. OASE has provided a solution for those seeking pumps with very small dimensions. The water inlet on each pump is at the base, making it ideal for water features with shallow water depths and the silent operation means you hear the sound of the water, not the pump.
The Aquarius Universal pump range is comprised of high-performance pumps with compact dimensions which are excellently suited for use in statuary fountains or decorative fountain systems in the garden, on the patio or on the balcony and indoors.
Aquarius Universal pumps have low-level suction and have a very low noise level due to their quiet operation.
Removable pedestal for installation where space is at a premium ( up to Aquarius Universal 12000)
The Aquarius Universal range starting with the 600 model, Can be used underwater or in dry installations
Easy adjustment of the flow rate
Ideal for continuous operation
All pumps are supplied with a 10m power cable.
The pump will not be damaged at temperatures as low as –20 °C.
Rated voltage 220 - 240 V / 50Hz
Davey EcoPure® Media Filter
The Davey EcoPure Media Filters are the simple, compact and economical answer to automatic pool sanitising for safe, clean and sparkling pool water. Top Mount Multi Port Valve (MPV) media filters are economical, reliable and easy to use.
Applications include, in-ground pools, above ground pools, swim spas, plunge pools and models suitable for pools up to 180,000 litres
Davey CrystalClear® Glass Media
- 100% crushed recycled glass that hasn’t been in contact with any food or beverage grade materials.
- Bacteria cannot flourish or grow within our unique glass media
- Non harmful to breathe – glass is not a carcinogenic product creating a safer environment for all
- Cuts chemical usage by up to 50% due to the self sterilisation nature of the glass and an oxidation process that takes place when water passes over the glass
- Lowers consumption of chlorine
- Outstanding performance with real cost benefits over the life of a filter
- Up to 25% less water to backwash – better permeability results in easier and less backwashing time 25% improvement in turbidity removal over sand media
- Less likely to block or channel and will not support moss or fungus growth in the media
The Hunter Pro Spray Pop Up Sprinkler is a professional grade irrigation spray body designed for durability, reliability, and consistent performance across residential and commercial landscapes. Manufactured from heavy duty ABS materials with precision internal components, the Pro Spray delivers dependable operation even under demanding conditions while maintaining efficient water distribution.
Designed for compatibility with industry standard female threaded spray nozzles, this sprinkler body provides excellent flexibility for new installations, system upgrades, and maintenance replacements. Multiple pop up height options allow the sprinkler to suit a wide range of turf and planting environments, while optional check valve and reclaimed water identification features provide additional installation versatility.
A powerful stainless steel spring ensures reliable riser retraction after operation, and the pressure activated multi function wiper seal prevents leakage and eliminates flow by, improving water efficiency across irrigation zones. External body ribs provide stability in loose soil conditions, while the ratcheting riser allows quick arc alignment during installation. The Pro Spray is engineered to provide long service life with minimal maintenance, making it a trusted choice for irrigation professionals and homeowners alike.
FEATURES
- Heavy duty ABS body and cap construction
- Stainless steel spring for reliable riser retraction
- Pressure activated wiper seal prevents leakage and flow by
- Compatible with industry standard female threaded nozzles
- Ratcheting riser for quick arc adjustment and alignment
- Directional flush plug to keep debris out during installation
- Optional drain check valve prevents low head drainage
- External body ribs improve stability in soil
- Optional rubber cap for high traffic areas
- Reclaimed water identification options available
- Durable design for long term performance
SPECIFICATIONS
- Product Type: Pop Up Spray Body
- Available Models: Shrub, 2", 3", 4", 6", 12" Pop Up
- Inlet Size: 1/2" Female Thread
- Operating Pressure Range: 103 to 482 kPa (15 to 70 PSI)
- Flow By: Zero flow by at 10 PSI or greater
- Precipitation Rate: Approximately 38 mm per hour with Hunter nozzles
- Optional Check Valve: Up to 3m elevation change
- Material: Heavy Duty ABS Construction
- Spring Material: Stainless Steel
- Compatibility: Industry Standard Female Thread Spray Nozzles
Compatible with Hunter Nozzles & Adjustable MP Rotar Nozzles
The Toro 570Z Pro Spray Pop Up Sprinkler is a durable and reliable irrigation spray body designed for residential and commercial landscape watering systems. Engineered for consistent performance and long service life, the 570Z series delivers dependable pop up operation, efficient water distribution, and easy installation across a wide range of irrigation applications.
Built with a compact low profile cap and robust internal components, the sprinkler body provides improved resistance to damage from exposure, vandalism, and maintenance equipment. The stainless steel retraction spring ensures reliable riser return after operation, while the retraction flushing action helps clear debris during pop down to maintain smooth performance over time.
Compatible with Toro spray nozzles including Maxijet low precipitation nozzles, the 570Z Pro Spray offers flexibility for various irrigation layouts and water efficiency requirements. Optional check valve models help prevent low head drainage and maintain charged lateral lines, improving system efficiency in sloped installations. Side inlet models are also available for easier installation and vandal resistance in deeper installations.
Designed for durability, reliability, and contractor friendly installation, the Toro 570Z Pro Spray is a trusted solution for professional irrigation systems and residential landscape watering.
SPECIFICATIONS
- Product Type: Pop Up Spray Body
- Available Models: 2", 3", 4", 6", 12" Pop Up
- Inlet Size: 1/2" Female Thread
- Radius Range: Up to 5.1m (depending on nozzle)
- Maximum Operating Pressure: 75 PSI (5.2 Bar)
- Minimum Operating Pressure (COM Models): 25 PSI (1.7 Bar)
- Cap Diameter: 50mm
- Body Diameter: 35mm to 44mm depending on model
- Optional Check Valve: Up to 3m elevation change
- Side Inlet Position: Approximately 120mm from top of sprinkler
- Material: Heavy Duty Polymer Construction
- Compatibility: Toro Spray Nozzles and Maxijet Nozzles
Compatible with Toro MPR 570 Series Nozzles, Toro 570 Precision nozzles,
Pope mechanical tap timers provide simple manual-start watering with automatic shutoff from a standard garden tap. Available in 2 hour and 6 hour models, they are suited to hose watering, sprinklers, drip lines and spray systems where a full electronic controller is not required.
These timers are mechanical, so no batteries are required. Turn the dial to the desired watering duration and the timer will shut off automatically once the selected time has elapsed. This makes them useful for customers who want a simple way to avoid leaving the tap running.
The 2 hour model allows watering in 5 minute increments up to 120 minutes, while the 6 hour model allows watering in 15 minute increments up to 360 minutes. Both models include a universal swivel tap nut to suit 20mm or 25mm BSP taps, manual override for untimed water flow and UV stabilised plastic construction.
Suitable for standard tap-based watering applications only. Not recommended where water pressure exceeds 1000kPa, where bore or unfiltered water is used, where a pump is used to draw water, or for commercial applications.
1 Year Pope Guarantee
1. Pope Brass Hose Connector 12mm
Used to connect 12mm garden hose to 12mm fittings.
2. Pope Brass Hose Connector 18mm x 18mm
Used to connect 18mm garden hose to 18mm fittings.
3. Pope Brass Connector Flo Thru 18mm x 12mm
Used to connect 18mm garden hose to 12mm fittings.
4. Pope 2 Way Brass Hose Coupler 12mm
Used to connect two 12mm garden hoses.
5. Pope Brass Repairer Joiner 12mm
Used to repair 12mm garden hose or join two hoses together.
Garden Hose
Our top quality garden hoses manufactured by Pope all feature first class UV treatment, Perma Fit Soft Grip hose fittings, tap readiness to ensure usability upon purchase and reinforced braiding.
Our hoses are kink resistant to varying degrees, with Heritage hose having the least resistance whilst Pinnacle hose has the most resistance. All of our Pope hoses also feature a warranty.
1 & 2. Pope Plastic 2/4 Way Swivel Tap - Threaded
Suits 20mm (3/4”) and 25mm (1”) hose tap outlets. Swivels allow the outlets to rotate for easy installation. Twist dials provide variable flow restriction and can shut off outlets entirely. Provides 20mm (3/4”) male thread outlets.
3. Pope EZ Dial Soft Grip 2 Way Tap Snap On
Suits 20mm (3/4”) and 25mm (1”) hose tap outlets. Provides two 12mm garden hose connections. The EZ dial allows you to use outlets independently or simultaneously, or to shut off both.
4. Holman 2 Way Tap Outlet
Suits 20mm (3/4”) and 25mm (1”) hose tap outlets. Provides two 20mm (3/4”) male outlets, and includes one 12mm garden hose connection to suit (pictured).
5. Holman 4 Way Tap Outlet
Suits 20mm (3/4”) and 25mm (1”) hose tap outlets. Provides four 20mm (3/4”) male outlets, and includes two 12mm garden hose connections to suit (pictured).
1. Pope Soft Grip Hose Connector 12mm
Used to connect 12mm garden hose to 12mm fittings.
2. Pope Plastic Hose Connector with Stop Valve 12mm
Used to connect 12mm garden hose to 12mm fittings. Stops flow when attached fitting is removed.
3. Pope Soft Grip 3 Piece Hose Connector Set 12mm
Includes: 12mm Soft Grip Hose Connector, 12mm Soft Grip Hose Connector with Stop Valve, 12mm Universal Tap Adaptor.
4. Pope Plastic Connector Swivel with Snap On 12mm
The swivel joint in this connector allows for ease of movement around the garden without kinking your hose.
5. Pope Plastic Hose Connector 18mm x 18mm
Used to connect 18mm garden hose to 18mm fittings.
6. Pope Plastic Hose Connector 18mm x 12mm
Used to connect 18mm garden hose to 12mm fittings.
7. Pope Plastic Hose Connector with Stop Valve 18mm
Used to connect 18mm garden hose to 18mm fittings. Stops flow when attached fitting is removed.
8. Pope Plastic 3 Piece Hose Connector Set 18mm
Includes: two 18mm Plastic Hose Connectors, 18mm Universal Tap Adaptor.
9. Pope Plastic 2 Way Hose Coupler 12mm
Used to connect two 12mm garden hoses.
10. Pope Plastic 3 Way Hose Coupler 12mm
Used to connect three 12mm garden hoses together, allowing you to extend one hose in two directions.
11. Pope Soft Grip Joiner Repairer 12mm
Used to repair 12mm garden hose or join two hoses together.
12. Orbit 12mm Hose Connector
Used to connect 12mm garden hose to 12mm fittings.
13. Orbit 13mm Hose Repair Coupling
Used to repair 13mm garden hose or join two hoses together.
Hand Sprays and Hose Nozzles
Our selection of hand sprays and hose nozzles provide the opportunity to choose from a high quality range of spray or hose nozzles to help you meet the requirements of your hand watering needs.
All nozzles and sprays are compliant with Australian standards.
Hose End Sprinkler
A simple solution to lawn watering where an irrigation system has not been installed or a temporary fix during irrigation system maintenance to aid lawn longevity
ING-CO Rotary Arm Sprinkler: Plastic base with Plastic 3 arm rotary sprinkler, also 3/4" BSP plastic snap-on adaptor.
DWV Clip
DWV clips provide a simple solution for pipe fixing, our high quality Australian made G2-Z275 galvanised steel and powder coated clips are conformant to Australian standard AS / NZ 3500 3.3.3. Our clips provide premium protection agains electrolysis, corrosion and water hammer.
DWV Clip
DWV clips provide a simple solution for pipe fixing, our high quality Australian made G2-Z275 galvanised steel and powder coated clips are conformant to Australian standard AS / NZ 3500 3.3.3. Our clips provide premium protection agains electrolysis, corrosion and water hammer.
63mm glycerine filled pressure gauges are used to monitor pressure in compatible pump, compressor, hydraulic, pipeline and general industrial systems. The glycerine filling helps dampen vibration and pressure pulsation, making these gauges easier to read in suitable applications where a dry gauge may be affected by movement or vibration.
This range includes Performer® standard 63mm pressure gauges with bottom entry 1/4 inch BSP connections and dual kPa / PSI scales. Select the pressure range to suit the system’s normal operating pressure and maximum expected pressure. Confirm pressure range, thread compatibility, system media and installation requirements before ordering.
Toro Pressure Regulating Valve 20mm (3/4" BSP)
Pressure regulating valves are used to limit the pressure of water flowing through the valve. Pressure regulating valves reduce incoming pressure to a set value. They’re typically installed in systems where too much pressure downstream will cause undesired effects, such as low density poly pipe bursting, or sprinklers outputting too much water.
NOTE: To reduce pressure upstream (for example to protect a pump) take a look at our range of pressure relief valves.
A. 20mm (3/4”) female BSP thread inlet & outlet.
Regulates/reduces pressure to 15 PSI (104 kpa).
B. 20mm (3/4”) female BSP thread inlet & outlet.
Regulates/reduces pressure to 30 PSI (208 kpa).
C. 20mm (3/4”) female BSP thread inlet & outlet.
Regulates/reduces pressure to 35 PSI (242 kpa).
D. 20mm (3/4”) female BSP thread inlet & outlet.
Regulates/reduces pressure to 40 PSI (276 kpa).
Netafim PRV Pressure Regulating Valve
Pressure regulating valves are used to limit the pressure of water flowing through the valve. Pressure regulating valves reduce incoming pressure to a set value. They’re typically installed in systems where too much pressure downstream will cause undesired effects, such as low density poly pipe bursting, or sprinklers outputting too much water.
NOTE: To reduce pressure upstream (for example to protect a pump) take a look at our range of pressure relief valves.
A. Netafim Inline PRV Series (#31000-001200)
20mm (3/4”) female BSP thread inlet & outlet.
Regulates/reduces pressure to 35 PSI (242 kpa).
Max inlet pressure: 1000 kPa.
Flow rate: 0.94 to 16.6 litres per minute.
B. Netafim PRV 2000 Series. (#30500-001600)
20mm (3/4”) female BSP thread inlet. 20mm (3/4”) male BSP thread outlet.
Regulates/reduces pressure to 35 PSI (242 kpa).
Max inlet pressure: 1000 kPa.
Flow rate: 13.2 to 66.6 litres per minute.
Solvent
A range of professional grade solvents, primers, cements, lubricants, and sealants designed for pipe installation, maintenance, and repair across plumbing, irrigation, and industrial applications. This collection includes PVC solvent cements for pressure and non pressure systems, priming fluids for pipe preparation, gasket lubricants for rubber seals, and industrial thread sealants for secure threaded connections.
Solvent cements are formulated to chemically bond PVC pipes and fittings, creating strong, reliable joints suitable for water and fluid systems. Primers help prepare pipe surfaces to improve bonding performance, while gasket lubricants assist with easier installation of rubber seals without damage. Thread sealants provide leak resistant sealing for threaded fittings in demanding environments.
Suitable for both professional installers and maintenance applications, these products support efficient installation and long term system performance when used according to manufacturer instructions and safety guidelines.
SFSP1-L016-01 (12V DC, max draw 5A)
16 L/m flow rate, 5.5m head, 12mm hose connection, 3m wire lead
The Seaflo 16LPM low voltage submersible pump is designed to act as a portable powerhouse. It provides up to 30 minutes of continuous operation (when connected to a suitable power unit, car battery, or solar power system). Its silent, vibration-free operation and food-grade materials make it perfectly suited to countless applications.
Features and benefits
- Up to 16 Liters per minute.
- Food grade materials.
- Silent, vibration-free operation.
- Dry sealed and permanently lubricated.
- Can be run for up to 30 minutes.
- Delivery height up to 6 metres.
- Completely submersible.
- Water enters the pump under the base.
Applications
- Marine
- Recreational Vehicles
- Bottle Water
Puretec BoreSafe Blast5 5kg is a granular bore cleaner used to break down iron build-up in bores, bore pumps and pipework. It helps reduce rust, unpleasant odours, orange-brown staining and mineral deposits caused by iron deposits in bore water applications.
BoreSafe Blast5 is a biodegradable granular formula that must be dissolved in water before being added to the bore. The required amount depends on bore diameter, water depth and whether the bore needs a standard maintenance dose or a shock dose. Recirculate and flush the system according to the Puretec instructions, and follow the product label and SDS before use.
Puretec BoreSafe Eco Specifications
Puretec BoreSafe Eco Safety Dats Sheet
Puretec CB 10 micron carbon block cartridges are replacement cartridges for compatible mains water filter housings. They are used to help reduce taste, odour, chlorine and sediment where the cartridge size, flow rate and housing type match the installation requirements.
This range includes standard 2.5" x 10" and MaxiPlus 4.5" diameter carbon block cartridges in 10" and 20" lengths. Puretec CB cartridges are constructed from bonded activated carbon for reliable cartridge filtration without carbon fines release. Confirm the installed housing size, cartridge length, flow requirement and water quality before ordering.
Puretec DP MaxiPlus dual purpose carbon cartridges are replacement cartridges for compatible large-format water filter housings. They are used where sediment filtration and taste, odour and chlorine reduction are required in a single 10 micron cartridge.
This range includes 4.5" diameter MaxiPlus cartridges in 10" and 20" lengths. DP10MP1 suits compatible 4.5" x 10" housings and DP10MP2 suits compatible 4.5" x 20" housings. Confirm the installed housing size, cartridge length, flow requirement, pressure range and water quality before ordering.
Puretec EC951 is a standard 2.5" x 10" extruded carbon replacement cartridge with a 0.5 micron rating. It suits compatible Puretec SIB1 and TW Series water filters where drinking water filtration, chlorine reduction, bad taste, odour and cyst reduction are required.
The EC951 has a 14 Lpm flow rate and uses a high porosity carbon design to help reduce cartridge plugging before adsorption capacity is reached. This is a replacement cartridge only, not a complete filter system. Confirm the installed filter model and cartridge code before ordering.
Puretec MC011-S is a standard 2.5" x 10" dual purpose moulded carbon replacement cartridge with a 1 micron nominal rating. It is used in compatible filter housings where sediment filtration and chlorine taste, odour and bad taste reduction are required.
The MC Series moulded carbon design combines bonded activated carbon with a cellulose-free synthetic fibre matrix, giving the cartridge the benefits of both a sediment filter and carbon block in one cartridge. MC011-S has a 16 Lpm flow rate and is a replacement cartridge only, not a complete filter housing or filtration system. Confirm housing compatibility, cartridge size and water quality before ordering.
Puretec PL 5 micron pleated sediment cartridges are replacement cartridges for compatible water filter housings. They are used to help reduce sediment, dirt and suspended particles where the cartridge size, flow rate and housing type match the installation requirements.
This range includes standard 2.5" x 10" and MaxiPlus 4.5" diameter pleated polyester cartridges in 10" and 20" lengths. The washable pleated design provides good dirt holding capacity and can help extend the time between cartridge changes or cleaning in suitable applications. Confirm the installed housing size, cartridge length, flow requirement and water quality before ordering.
Puretec PX 5 micron polyspun sediment cartridges are replacement cartridges for compatible water filter housings. They are used to help reduce dirt, rust, sand, silt, algae and other suspended particles where the cartridge size, flow rate and housing type match the installation requirements.
This range includes standard 2.5" x 10" and MaxiPlus 4.5" diameter polyspun cartridges in 10" and 20" lengths. The PX Series is made from virgin polypropylene using graded density depth filtration for high sediment holding capacity and consistent particle reduction. Confirm the installed housing size, cartridge length, flow requirement and water quality before ordering.
Puretec EM2-60 is a dual-stage 10" whole house rainwater filter system designed for rainwater and other suitable cold water supplies. It helps reduce sediment, dirt, rust, algae, taste and odour before water is distributed through a small to medium home or building.
This model has a 5 micron nominal rating, 60 Lpm maximum flow rate and 1" BSP / 25mm connection. It includes PL05MP1 and DP10MP1 cartridges and does not require power. This is a filtration system only – use suitable disinfection where bacterial protection is required.
Puretec PL Series Cartridge Specifications
Puretec DP Series Cartridge Specifications
Video 1
Video 2
Puretec Hybrid E7 is a twin 20" whole house rainwater filtration and UV treatment system designed for common rainwater supplies. It combines dual-stage cartridge filtration with Radfire™ UV treatment to help reduce sediment, taste, odour and bacteria before water is distributed through the home.
This model has a 130 Lpm maximum flow rate, 1" BSP Male / 25mm connection, 5 micron nominal rating and 300–875 kPa operating pressure range. It includes PL05MP2 pleated sediment cartridge, DP10MP2 dual purpose cartridge and RL7 UV lamp. Confirm water quality, flow demand, pressure, power supply, surge protection and installation requirements before ordering.
Puretec Hybrid E Brochure
Puretec Hybrid E Series Installation Guide
Puretec Hybrid E Series Maintenance Guide
Puretec Hybrid E7 & E6 Specifications
Puretec PL Series Cartridge Specifications
Puretec DP Series Cartridge Specifications
Video 1
Puretec PureMix Z6 undersink filter system and Z6-R cartridge are used for mains water filtration through an existing mixer tap. The PureMix Z6 is the complete high flow inline undersink system, while the Z6-R is the replacement cartridge used for ongoing maintenance.
The PureMix Z6 system includes the Z6-R 0.1 micron cartridge, valve-in-head, PVM65PH multivalve, mounting bracket, braided hose, extension kit, tubing and selected fittings. Ultra Z 3-stage filtration helps reduce sediment, chlorine, chloramine, bad taste, odours, fine particles, cysts and bacteria such as E. coli where the water quality and installation conditions suit the system. Confirm whether you need the complete filter system or the replacement cartridge before ordering.
Puretec Z Series Brochure
Puretec Z6 Z7 User Guide
Puretec Puremix Z6 Specifications
Z6 Cartridge Information
Video 1
Video 2
Puretec PureMix Z7 undersink filter system and Z7-R cartridge are used for higher sediment and harsher water filtration applications where the water quality and installation conditions suit the system. The PureMix Z7 is the complete high flow inline undersink system, while the Z7-R is the replacement cartridge used for ongoing maintenance.
The PureMix Z7 system includes the Z7-R 1 micron cartridge, valve-in-head, PVM65PH multivalve, mounting bracket, braided hose, extension kit, tubing and selected fittings. Z Plus filtration helps reduce sediment, rust, sand, silt, algae, chlorine, chemicals, bad taste, odours and cysts such as Giardia and Cryptosporidium. Confirm whether you need the complete filter system or the replacement cartridge before ordering.
Puretec Z Series Brochure
Puretec Z6 Z7 User Guide
Puretec Puremix Z7 Specifications
Z7 Cartridge Information
Video 1
Video 2
Puretec shower filters and replacement cartridges are designed for mains water shower filtration. The range includes the SF240-CH complete shower filter system and the SF24-2 replacement cartridge twin pack for maintaining compatible shower filter housings.
The SF240-CH system uses Carbon and KDF filtration media to help reduce chlorine, sediment, odours and selected metals/minerals in shower water. The SF24-2 cartridge twin pack is a replacement cartridge set only, not the complete shower filter housing. Confirm whether you need the full shower filter system or replacement cartridges before ordering.
Video 1
Puretec TW1 is a twin undersink drinking water filter system designed for mains / town water supplies. It provides filtered water through the included OT250 high loop faucet and helps reduce sediment, chlorine, taste and odour at the kitchen tap.
This system includes MB051 sediment cartridge and EC951 taste and odour cartridge, with a 0.5 micron nominal rating, 0–7 Lpm flow range, 100–500 kPa pressure range and 1/4" QC connection. TW1 does not include a pressure limiting valve. Confirm site pressure, water quality and installation requirements before ordering.
Puretec Basic SIB_TW User Guide
Puretec Basic TW Series Specifications
Puretec MB Series Cartridge Specifications
Puretec OT User Guide
Puretec Basic OT Series Faucets Specifications
Puretec WH2-55 is a dual 20" whole house water filter system for mains / town water supplies. It helps reduce sediment, chlorine, taste, odour and chemicals before water is distributed through a medium to large home or workplace.
This twin system includes PX05MP2 sediment cartridge and CB10MP2 taste and odour removal cartridge, with a 5 micron nominal rating, 55 Lpm maximum flow rate and 1" BSP / 25mm connection. It does not require power. Confirm water source, pressure, flow demand, installation requirements and cartridge maintenance before ordering.
Puretec WH2 Series Specifications
Puretec WH EM Series Installation Guide
Puretec WH EM Series Maintenance Guide
Puretec CB Series Cartridge Specifications
Puretec PX Series Cartridge Specifications
Video 1
Video 2
Puretec X3 is an inline undersink water filter system for mains / town water supplies, supplied with a high loop designer faucet and IL149Q filter cartridge. It helps reduce chlorine, sediment, bad taste, odours and heavy metals at the kitchen tap while leaving essential minerals and fluoride in the water.
This tap and filter kit has a 1 micron nominal rating, 1.9 Lpm flow rate, 100–500 kPa pressure range and 1/4" Quick Connect fittings. It includes the DFU180 high loop designer faucet, SmartTee™, multivalve, mounting bracket and installation fittings. Confirm mains water supply, pressure, available undersink space and installation requirements before ordering.
Puretec X3 X4 Series User Guide
Puretec X3 Series Specifications
Puretec Z18 tap and filter kit and Z1-R cartridge are used for mains / town water undersink drinking water filtration. The Z18 is the complete quick-twist undersink filter system with dedicated high loop faucet, while the Z1-R is the replacement cartridge used for ongoing maintenance.
The Z18 system includes the Z1-R 0.1 micron cartridge and DFU180 high loop faucet for filtered water at the kitchen sink. Ultra Z filtration helps reduce sediment, rust, dirt, chlorine, chloramine, bad taste, odours, chemicals, fine particles and cysts such as Giardia and Cryptosporidium where the water quality and installation conditions suit the system. Confirm whether you need the complete tap and filter kit or the replacement cartridge before ordering.
Puretec Z Series Brochure
Puretec Z12 Z18 User Guide
Puretec Z18 Specifications
Puretec Z1-R Replacement Cartridge Specifications
Puretec Z2-HFR undersink retrofit kit and Z2-R cartridge are used for upgrading, replacing and maintaining compatible undersink water filter systems. The Z2-HFR kit includes the filter head, mounting bracket, selected fittings and Z2-R cartridge, while the Z2-R is the replacement cartridge used for ongoing maintenance.
This range is suited to undersink filtration applications where the water source, pressure, temperature and installation requirements match the system specifications. The Z2-R cartridge uses Z Plus filtration technology to help reduce sediment, rust, sand, silt, algae, chlorine, chemicals, bad taste and odours. Confirm whether you need the complete retrofit kit or the replacement cartridge before ordering.
Puretec Z Series Brochure
Puretec Z2-HFR Specifications
Puretec Z2-HFR User Guide
Z2=R Catrdige information
Puretec CD13-3 is a twin filter housing assembly that suits compatible 9¾" / 10" cartridges. It has 3/4" BSP / 20mm connections and is used where two cartridges are required in series for sediment, taste, odour or other filtration duties depending on the cartridges selected.
The CD13-3 has a 0–38 Lpm flow range, 200–875 kPa pressure range and 0–52°C temperature range. Cartridges and plumbing kit are not included, and cartridge choice must suit the water source and filtration requirement. Confirm cartridge size, connection size, pressure, available mounting space and installation requirements before ordering.
Puretec CD Series User Guide
Puretec CD Series Specifications
Puretec FP10B is a single 10" filter housing kit with grey bowl, designed to suit compatible 10" filter cartridges. It has 3/4" / 20mm connections and can be used for sediment, taste, odour or other filtration duties depending on the cartridge selected.
The FP10B has a 0–38 Lpm flow range, 0–875 kPa pressure range and 0–52°C temperature range. The kit includes a mounting bracket and spanner wrench, but the filter cartridge is not included. Confirm cartridge compatibility, connection size, pressure, mounting space and installation requirements before ordering.
Puretec FP MP Series User Guide
Puretec FP Series Specifications
Video 1
Puretec MPX heavy duty single filter housings are extra heavy duty water filter housings for compatible MaxiPlus 4.5" diameter cartridges. They are used for whole house, whole building and higher flow filtration applications where the selected cartridge, water source, pressure and flow rate suit the system design.
The MPX range includes MPX100B for 4.5" x 10" cartridges and MPX300B for 4.5" x 20" cartridges. Both models use 1" BSP connections, include a rust-proof anti-flex aluminium wall mount bracket and are suitable for internal or external installation. Filter cartridges are not included and must be selected separately to suit the required filtration duty.
Puretec MPX Series User Guide
Puretec MPX Series Specifications
Puretec maintenance kit for Hybrid E7/I7 is used for routine servicing of compatible Puretec Hybrid E7, Hybrid I7 and Hybrid E7AMC rainwater filtration and UV systems. It is a maintenance kit only, not a complete filtration and UV system.
The kit includes PL05MP2 20" pleated sediment cartridge, DP10MP2 20" dual purpose carbon cartridge, RL7 UV lamp, RQS6 quartz sleeve and O-rings. Routine replacement helps maintain filtration performance, UV performance and system reliability. Confirm the installed system model and kit compatibility before ordering.
Puretec PL Series Cartridge Specifications
Puretec DP Series Cartridge Specifications
Puretec maintenance kit for Hybrid G7/R2 is used for routine servicing of compatible Puretec Hybrid UV and filtration systems. It is a maintenance kit only, not a complete filtration and UV system.
The kit includes PL05MP2 20" MaxiPlus™ sediment filter, DP10MP2 taste and odour removal filter, RL6 UV replacement lamp, RQS6 replacement quartz sleeve and 2 x ROR2 O-rings. Routine replacement helps maintain filtration performance, UV performance and system reliability. Confirm the installed system model and kit compatibility before ordering.
Puretec HybridCare Flyer
Puretec PL Series Cartridge Specifications
Puretec DP Series Cartridge Specifications
Video 1
Puretec TankSafe rainwater tank purifiers are chlorine-free rainwater tank disinfectant products designed to help treat stored rainwater. They are used to kill up to 99.9% of germs, bacteria and viruses in tank water when applied at the correct dosage and allowed the required contact time.
This range includes TankSafe 2L and 5L sizes for different tank volumes. The standard dosage is 65mL per 1,000L of tank water, with a 24 hour contact time required after dosing. Use TankSafe test strips after treatment to confirm dosing level, and continue testing every 2–3 weeks or after significant rainfall. Always follow the product label, safety directions and storage instructions.
Puretec TankSafe Brochure
Puretec TankSafe Specifications
Puretec TankSafe SDS
Video 1
Puretec TankSafe Test Strips Five-Pack is a rainwater test kit for quick at-home checks of rainwater tank condition. The pack includes 5 water test strips and is used to monitor key water quality indicators in stored rainwater.
The TankSafe test strips provide a convenient snapshot of tank water condition so changes can be identified more easily. They are a testing aid only and do not treat, filter or disinfect water. Use the results as a guide when deciding whether rainwater tank maintenance, filtration or further water testing may be required.
Puretec WTEST-KIT1 is a water analysis test kit used to collect and return a water sample for professional testing. It includes the sample bottle, absorbent material, prepaid postage parcel, ziplock bag, test form and user guide required to submit the sample.
The analysis covers 14 common water quality parameters including pH, TDS, conductivity, total hardness, total iron, total manganese, silica, nitrate, copper, chloride, sodium, total alkalinity, fluoride and sulphate. Once the sample is received, Puretec analyses the water and returns the results with a system recommendation. This kit is for water analysis only and is not an instant test strip kit or water treatment product.
Puretec Water Test User Guide
Puretec Water Test Specifications
Video 1
PVC Ball Valves
PVC Ball Valves are versatile high capacity stop valve. These valves have a range of applications, such as, flow and pressure control. PVC Ball V alves hae an on and off function.
Various Colours: White, Grey & Blue
BSP Thread or Socket Joint
Non-UV stabilised
PVC Pressure Barrel Union (Cat 22)
Barrel unions allow temporary disconnection of pipe, and provide an easy to way to remove parts of a system. They’re commonly used where maintenance of pumps and valves may be required. The locking ring can be unscrewed without rotating other fittings and pipe, making barrel unions useful in tight spots like underground installations. When the locking ring is unscrewed the two halves of the fitting separate so you can lift or drop out the section. PVC Pressure Barrel Unions have sockets on both sides for PVC pressure pipe. A rubber ring provides the internal seal between components.
Primer and solvent recommended for optimal use. Commonly used in swimming pool and irrigation applications.
Our PVC Pressure Barrel Unions are Watermark Approved Fittings, and manufactured to AS/NZS 1477 Standard.
PVC Pressure Reducing Bush (Cat 5)
PVC Pressure Bush Reducing allows you to fit smaller pipes into larger fittings. Commonly used with couplings, tees, elbows, and the bell-ends of larger pipes, to transition to smaller sizes. One side of the fitting is a spigot (it has the same outside diameter as a PVC pressure pipe) allowing it to be inserted into another fitting. The other side is a socket for a smaller size of PVC pressure pipe to fit into.
See PVC Coupling Reducing to join two PVC pressure pipes of different sizes.
Primer and solvent recommended for optimal use. Commonly used in irrigation and industrial applications.
NOTE: If you cannot find a size combination here, you may be able to make it up by gluing one into another.
Our PVC Pressure Reducing Bushes are Watermark Approved Fittings, and manufactured to AS/NZS 1477 Standard.
PVC Pressure Compression Coupling
PVC Pressure Compression Couplings are commonly used for quick repairs and in wet installs. They do not require solvent or primer, but lubricant is recommended. The fitting slides over pipe to get into position easily, then the nuts are tightened to create a seal on each end. No tools required for installation. These couplings can connect pipes of other materials like iron, plastic, and steel.
Our PVC Pressure Compression Couplings are Watermark Approved Fittings, and manufactured to AS/NZS 1477 Standard.
PVC pressure couplings are PVC-U fittings with a solvent-weld socket at both ends. They join two lengths of matching PVC pressure pipe in a straight line.
Each socket fits over PVC pressure pipe of the same nominal size and is joined using PVC priming fluid and pressure-rated solvent cement. PVC pressure pipe sizes are nominal, so the stated size is different from the measured pipe outside diameter. This joining method is known as a solvent weld joint, or SWJ.
These couplings are suited to residential, commercial and agricultural irrigation, garden and landscape watering, domestic and rural water supply, pump systems, pool and spa equipment, general water transfer and compatible PVC pressure pipework.