Puretec Cartridge Z1-R to suit Z18
Puretec Cartridge Z1-R to suit Z18
Puretec Cartridge Z1-R to suit Z18
Puretec Cartridge Z1-R to suit Z18

PURETEC Z1-R REPLACEMENT CARTRIDGE 0.1 MICRON 10"

Puretec Z1-R is a replacement cartridge for compatible Z18 undersink tap and filter systems. This is a cartridge only, not the complete filter kit.

✓ Replacement Cartridge Only
✓ Suits Compatible Puretec Z18 Systems
✓ 0.1 Micron Nominal Rating
✓ 10" Ultra Z Cartridge
✓ 30,000 L Cartridge Capacity
✓ Replace Every 6–12 Months or 30,000 L
✓ Confirm System Compatibility Before Ordering

Puretec Z Series BrochurePuretec
Z12 Z18 User Guide
Puretec
Z18 Specifications
Puretec
Z1-R Replacement Cartridge Specifications

Puretec Cartridge Z1-R to suit Z18

Puretec Z1-R is a 10" Ultra Z replacement cartridge to suit compatible Puretec Z18 undersink tap and filter systems. It is used to maintain filtration performance where a 0.1 micron Z1-R cartridge is required.

This is a replacement cartridge only, not the complete Z18 tap and filter kit. The cartridge helps reduce sediment, rust, sand, silt, algae, chlorine, chloramine, bad taste, odours, chemical pesticides, sulphur, fine particles and cysts where the installed system and water quality conditions suit the cartridge. Replace every 30,000 litres or every 6–12 months, whichever occurs first, or sooner if taste, odour or flow changes.

Puretec Z Series Brochure
Puretec Z12 Z18 User Guide
Puretec Z18 Specifications
Puretec Z1-R Replacement Cartridge Specifications

✓ Product Type & Model
Puretec Z1-R Ultra Z filter replacement cartridge.

✓ Compatibility
Suits compatible Puretec Z18 undersink tap and filter systems. Also suits other Puretec systems where Z1-R is the specified cartridge.

✓ Component Type
Replacement cartridge only. Filter head, faucet, tubing, fittings and installation components not included.

✓ Application
Designed for low sediment mains water applications where the installed Puretec system and water quality conditions are suitable.

✓ Filtration Technology
Ultra Z 3-stage filtration technology.

✓ Micron Rating
0.1 micron nominal rating.

✓ Reduces
Helps reduce sediment, rust, sand, silt, algae, chlorine, chloramine, bad taste, odours, chemical pesticides, sulphur, fine particles and cysts.

✓ Flow Rate
5.5 Lpm flow rate.

✓ Pressure Range
200–520 kPa operating pressure. Where line pressure exceeds 500 kPa, an approved pressure limiting device must be installed.

✓ Temperature Range
0–38°C operating temperature. Protect from freezing.

✓ Cartridge Size
10" cartridge size.

✓ Capacity
30,000 L capacity, based on supplier test conditions.

✓ Maintenance
Replace cartridge every 30,000 L or every 6–12 months, whichever occurs first, or sooner if taste, odour or flow changes.

✓ Compatibility Note
Confirm the installed filter system and cartridge code before ordering.

✓ Water Quality Note
Do not use with microbiologically unsafe water or water of unknown quality without adequate disinfection before or after the system.

You may also like

Recently viewed