Brass Foot Valves
Non-return Valves, prevent backflow in a piping system, allowing water to flow in one direction.
Featuring a wide body for excellent flow with working temperatures 0°C to 120°C and a maximum pressure rating of 1600kPa.
Female BSP Thread
Aluminium Camlock Fittings
Aluminium camlocks are commonly used where a quick, convenient connection and disconnection of piping and hose is required. All of our aluminium camlocks are suitable to a temperature up to 100 degrees celsius. Threads are cut according to the ISO 228 standard all of our camlocks have been produced to Mil Spec A-A 59326. These products conform to ASTM B 26B 26M and are typically used for general use, agriculture and industrial applications. They are also suitable for general air and water applications.
Water Level Indicator
Water Level Indicator is designed to provide a clear and simple visual indication of the water level inside your tank without the need for power or electronics. The system operates using two floats connected by a rod that moves freely up and down as the water level changes, allowing you to easily monitor tank levels from ground level.
The indicator features an adjustable patented uni ball joint that allows installation on a wide range of tank roof angles, making it suitable for different tank types and configurations. Manufactured from UV resistant premium quality materials, it is designed to withstand outdoor conditions and long term exposure to sunlight.
Suitable for use on all water tanks including rainwater tanks and storage tanks. Spare extension tubes and replacement floats are available if additional height or maintenance is required.
Made in New Zealand.
Bermad 100 Series Valves
The Bermad 100 series valve is a basic hydraulic valve which uses the hydraulic force of the existing line pressure. It can also utilise any external hydraulic command be it air or water to open and close the valve. This valve is commonly used for on/off applications for agricultural irrigation heads and filter stations.
Bermad PRV Adjustable Pressure Regulating Valve
Pressure regulating valves are used to limit the pressure of water flowing through the valve. Pressure regulating valves reduce incoming pressure to a set value. They’re typically installed in systems where too much pressure downstream will cause undesired effects, such as low density poly pipe bursting, or sprinklers outputting too much water.
NOTE: To reduce pressure upstream (for example to protect a pump) take a look at our range of pressure relief valves.
A. 25mm (1”) female BSP thread inlet & outlet.
Adjustable pressure regulation between 50 kpa to 120 kpa.
B. 25mm (1”) female BSP thread inlet & outlet.
Adjustable pressure regulation between 100 kpa to 200 kpa.
C. 25mm (1”) female BSP thread inlet & outlet.
Adjustable pressure regulation between 150 kpa to 350 kpa.
D. 25mm (1”) female BSP thread inlet & outlet.
Adjustable pressure regulation between 300 kpa to 550 kpa.
Black Fire Reel Hose
Reinforced black UV stale fire hose and preassembled reels.
- Working Pressure : 145 PSI (999.74kPa)
- Reels fit 25m of 19mm fire hose or 20m of 25mm fire hose
- AS/NZ 1221
HiFlex Suction
HiFlex Suction is a corrugated highly flexible hose with a rigid PVC spiral embedded, its inner wall is smooth. This hose also provides an excellent UV resistance
Common uses for this hose include being used as a discharge hose, bilge and pond pump applications, it can also be used as a dust extraction hose or a light duty air seeder
Working temperature -5 to 60 degrees C
Petrochemical Hose
The petrochemical hose is highly flexible hose and has good resistance to mineral oils and animal fats. This hose has high UV stability due to high nitrile content with the working temperature of -5 to 60 degrees C
Low Pressure Layflat
Commonly used for temporary water supply and drainage
Lightweight with synthetic
Resists most chemical agents
Blue Line
Working temperature -5 to 60 degrees C
Highly flexible suction and discharge hose designed for the transfer of hydro-carbon based materials such as diesel fuel, petrol, oils, greases and lubricants
Blue hose with a rigid PVC spiral reinforcement
Bore Accessories
Top End and Bottom End Plug to suit most domestic and commercial Bore Applications
Utilities Drilling Aids
Extensive range of quality Chemicals, Cleaning Products and Screens for Bore Hole Drilling and Maintenance
ALDERDICE VERTICAL CHECK VALVE
Alderdice Vertical Check Valves are made of Gunmetal Bronze and manufactured in Australia. They're designed for use in pumping systems to hold prime and prevent back flow.
 |
Brass male x female threaded reducing bushes are used to adapt threaded fittings, valves, manifolds and pipework from one size down to another. They are suitable for plumbing, irrigation, rural water and general water systems where a larger female BSP threaded connection needs to be reduced to a smaller female BSP outlet.
Made from DR lead free brass, these reducing bushes provide a male BSP outside thread with a smaller female BSP internal thread. Use suitable thread sealant or PTFE tape when installing into compatible BSP threaded fittings.
Brass Threaded Reducing Bush Male x Female BSP Specifications
Brass female threaded sockets are used to connect two male BSP threaded fittings, pipe ends or threaded components. They are suitable for plumbing, irrigation, rural water and general water systems where a straight female-to-female threaded join is required.
Made from DR lead free brass, these sockets provide a durable connection between compatible BSP threaded fittings. Use suitable thread sealant or PTFE tape when installing male BSP threads into the socket.
Dual Check Valve
Used for backflow prevention
WaterMark Certified
Meets AS/NZS 2845.1
Brass female threaded 90° elbows are used to change the direction of BSP threaded pipework, fittings and valve connections. They are suitable for plumbing, irrigation, rural water and general water systems where a compact right-angle threaded connection is required.
Made from DR lead free brass, these elbows provide a durable female BSP connection at each end. Use suitable thread sealant or PTFE tape when installing male BSP threads into the elbow.
1. Brass Elbow 90° Threaded BSPF
High quality, heavy duty brass fitting. Has Female/Female British Standard Pipe (BSP) threads. Common use for water application used in general, irrigation and rural services, compressed air pipes and fuel and gas lines utilities.
2. Brass Elbow Capillary Wall Plate
A Capillary fitting has a socket-type end so that when the fitting is soldered to a pipe end, the solder flows by capillarity along the annular space between the pipe exterior and the socket within it, forming a tight fit.
12 Month Warranty
Product Specification
Complete fitting, Brass Compression 90 degree Elbows includes nylon olives. Connection: Compression x Lugged (Back plated wall elbow) Female BSP; Compression x Compression; Compression x Female BSP.
Comes with Nylon Olives
Use on nylon, poly, copper, aluminium and brass tubing
No specialised tools required
Pressure Rating 500kpa
Standards: AS 3688-2005
Product Specification
Complete fitting, Brass Compression 90 degree Elbows includes nylon olives. Connection: Compression x Lugged (Back plated wall elbow) Female BSP; Compression x Compression; Compression x Female BSP.
Comes with Nylon Olives
Use on nylon, poly, copper, aluminium and brass tubing
No specialised tools required
Pressure Rating 500kpa
Standards: AS 3688-2005
Product Specification
2a. Brass Flared Adaptor Copper x BSPM 15mm x 15mm (1/2" x 1/2")
Brass Flared Elbow 90° Threaded BSP/Copper
High quality, heavy duty brass fitting, complies with Australian Standards (AS3688). Adapts copper pipe to a BSP Thread (Flaring Tool Required). Designed for use with aluminium, copper, brass and welded steel tubing that can be flared. Suitable for use with Fuel, Liquid Petroleum Gas, Natural Gas, Oil. Flared fitting resists mechanical pull out.
- DR (Dezincification) Brass
- Tested and certified to AS 3688
-
12 month warranty
Product Specification
Brass Gate Valves
Used for general water applications.
Also suitable for Diesel use.
Pressure Rating: 1600kPa/ 235psi
Brass male threaded hose barbs are used to connect flexible hose to BSP threaded fittings, valves, pumps and pipework. They are suitable for plumbing, irrigation, rural water and general water systems where a hose connection is required from a male threaded adaptor.
Made from DR lead free brass, these hose barbs provide a male BSP thread on one end and a hose barb connection on the other. Use suitable thread sealant or PTFE tape on the BSP thread and secure the hose with a suitable hose clamp.
Brass Threaded Hose Barb Male BSP x Hose Barb Specifications
Brass male threaded swivel hose barbs are used to connect flexible hose to BSP threaded fittings, valves, pumps and pipework while allowing the hose barb connection to rotate during installation. They are suitable for plumbing, irrigation, rural water and general water systems where hose alignment is important.
These fittings use brass threaded and hose barb components with a stainless steel circlip and EPDM O-ring. Use suitable thread sealant or PTFE tape on the BSP thread and secure the hose with a suitable hose clamp.
Brass Threaded Swivel Hose Barb Male BSP x Hose Barb Specifications
Brass hose nut and tails are used to connect flexible hose to male BSP threaded fittings, outlets and pipework with a removable nut and sealing washer connection. They are suitable for plumbing, irrigation, rural water and general water systems where a hose tail connection needs to be fitted to a male threaded outlet.
Made with a brass nut, DR lead free brass tail and EPDM washer, these fittings provide a female BSP nut connection on one end and a hose tail connection on the other. Secure the hose with a suitable hose clamp and ensure the washer is correctly seated during installation.
Brass Hose Nut and Tail Female BSP x Hose Tail Specifications
Brass Garden Hose Taps are designed for outdoor installation. Featuring a contoured twist operation handle, these brass hose taps allow for ease of use.
- DR (Dezincification Resistant) Brass
- Tested and certified to AS/NZS 3718
- Working temperature 0°C to 60°C
- Maximum Pressure rating 1600kPa
- Double O Ring Spindle
- Watermarked Approved
- 100% Pressure tested
Brass Tap Product Specification
Vandal Proof Tap Product Specification
Pump Accessories
Manifolds, check valves, heat shrink and pressure switches all to suit your pump
1. Heat Shrink Pump Cable Joint Kit (1.5mm² to 6mm²) Specifications
2. Telemecanique XMP Pressure Switch - Specifications
3. Brass Swivel Union MF
4. Brass 5-way Manifold
5. Brass Check Valve
For Pressure Gauges - CLICK HERE For Float Switches - CLICK HERE For DOL Starters - CLICK HERE
Brass male x male threaded reducing nipples are used to adapt between two different female BSP threaded fittings, valves or pipe connections. They are suitable for plumbing, irrigation, rural water and general water systems where a straight male-to-male threaded connection needs to change size.
Made from DR lead free brass, these reducing nipples provide male BSP threaded connections at both ends in different sizes. Use suitable thread sealant or PTFE tape when installing into female BSP threads.
Brass Threaded Reducing Nipple Male x Male BSP Specifications
Brass male threaded nipples are used to connect two female BSP threaded fittings, valves or pipe connections. They are suitable for plumbing, irrigation, rural water and general water systems where a straight male-to-male threaded join is required.
Made from DR lead free brass, these nipples provide a durable connection between compatible BSP threaded components. Use suitable thread sealant or PTFE tape when installing into female BSP threads.
Brass male threaded plugs are used to blank off female BSP threaded fittings, outlets and pipework. They are suitable for plumbing, irrigation, rural water and general water systems where an unused threaded connection needs to be sealed.
Made from DR lead free brass, these plugs provide a durable threaded connection for compatible BSP fittings. Use suitable thread sealant or PTFE tape when installing into female BSP threads.
Brass Swing Check Valves
Used for tanks systems to prevent backflow contamination.
All Valves are rated for 1600kPa / 235psi pressure rating
Brass Tee Conetite 20mm (3/4")
Brass female threaded tees are used to create a branch connection from BSP threaded pipework, fittings and valve assemblies. They are suitable for plumbing, irrigation, rural water and general water systems where a threaded line needs to be split or branched.
Made from DR lead free brass, these tees provide female BSP threaded connections on all three outlets. Use suitable thread sealant or PTFE tape when installing male BSP threads into the tee.
Brass Union Conetite 1" (25mm)
Brass Y Strainer Valves
Maximum operating temperature 0°C - 99°C
Working pressure 2000kPa
Mesh Size: 15MM-25MM 350 Micron
Watermarked
Manufactured and tested in accordance with AS3688
SS304 Filter
Butterfly Sprinklers
Designed for domestic and agricultural watering systems.
1. Plastic Butterfly Sprinkler. No manufacturer specifications available.
2. Zinc/Chrome Butterfly Sprinkler. No manufacturer specifications available.
3 & 4. Brass Butterfly Sprinkler. Product Specifications (HR Products)
5, 6, 7 & 8. Raindrop Brass Butterfly Sprinkler. Product Specifications (HR Products)
9. Rotormax Plastic Butterfly Sprinkler. Product Specifications (Antelco)
10. Rotoframe Butterfly Sprinkler. Product Specifications (Toro)