This Type D 40mm die-cast aluminium camlock fitting has a female camlock coupling at one end and a female BSP thread at the other. It screws onto a male BSP connection, providing a detachable connection for hose or equipment used in irrigation and water transfer.
The female camlock end has two cam arms. Insert the male camlock adaptor and close both arms to draw it against the sealing washer. The fixed connection stays in place when the camlock joint is disconnected.
The threaded end has a 40mm (1 1/2") female BSP thread.
The pressure rating for this 40mm fitting is 1724 kPa.
The fittings are made from die-cast aluminium for general irrigation, agricultural and industrial water-transfer applications. The camlock profile follows Mil Spec A-A 59326.
BSP threads are cut to ISO 228.
The NBR sealing gasket has a maximum temperature of 100°C.
Replacement seals for the female couplings are available in our camlock sealing washer range.
