A compact double-cased submersible sump pump designed for reliable dewatering and water transfer in domestic and light commercial applications. The DC10 series features a semi-vortex centrifugal impeller capable of handling small suspended solids while reducing the risk of blockage. The “A” model includes a preset float switch for automatic operation, while the “M” model provides manual control. Durable construction with stainless steel components and advanced shaft sealing ensures long service life and dependable performance even in partially submerged installations
FEATURES
- Open impeller semi-vortex centrifugal design allows pumping of small soft solids with reduced clogging risk
- Double casing design with full discharge flow past the motor improves cooling and enables partially submerged operation
- Hard-faced silicon carbide and ceramic mechanical shaft seal in oil bath for enhanced protection and durability
- Sand slinger lip seal provides additional motor protection and extended service life
- Corrosion-resistant stainless steel fasteners for longevity and reliability
- Automatic resetting thermal overload protection safeguards against overheating
- Automatic float switch operation on DC10A models for convenient hands-free control
APPLICATIONS
- Sump pit drainage and emptying
- Emergency flood relief and water removal
- Water transfer and drainage in domestic or light commercial environments
- Fountains and waterfalls (non-fish applications)
- Partially submerged pumping situations where reliable cooling is required
SPECIFICATIONS
- Maximum flow up to 80 L/min
- Maximum head up to 6 m
- Maximum submergence depth 10 m
- Maximum liquid temperature 50°C
- Outlet size 1″ BSP male
- Suitable for clean water with up to 10% small soft organic solids (less than 10 mm)
- Power supply 220–240V single phase, 50 Hz
- Motor rating 0.1 kW, approximately 1.0 A full load current
- IPX8 protection rating
- 6 m oil-resistant power cable
- Weight approximately 4 kg
The Davey D15VA submersible drainage pump is a compact and reliable solution designed for grey water pumping, sump emptying, water transfer and light waste handling applications. Built with a semi-vortex open impeller design, the pump is capable of handling soft solids in suspension while reducing the risk of blockage. The corrosion-resistant stainless steel motor shell and durable internal components ensure long service life in demanding environments such as pits, tanks and drainage systems.
FEATURES
- Semi vortex open impeller centrifugal design allows pumping of soft solids in suspension with reduced blockage risk
- Recirculation port keeps solids agitated in sump improving pumping performance
- Double mechanical shaft seal in oil bath with silicon carbide and ceramic seal surfaces for long service life
- Sand slinger lip seal provides additional motor protection
- Corrosion resistant 304 stainless steel motor shell shaft and fasteners
- Automatic resetting thermal overload protection prevents motor damage
- HO7RN-F oil resistant power lead with 3 pin plug for easy installation
- Compact lightweight construction suitable for residential and light commercial use
APPLICATIONS
- Grey water pumping
- Sump emptying and drainage pits
- Septic effluent disposal
- Water transfer
- Light slurries and factory waste pumping
SPECIFICATIONS
- Model D15VA
- Motor Output 150W
- Power Supply 220–240V single phase 50Hz
- Start Current 9.0A
- Run Current 1.5A
- Maximum Flow 240 L/min
- Maximum Head 7.5m
- Maximum Submergence 12m
- Maximum Operating Temperature 50°C
- Maximum Soft Solids 20mm
- Outlet Size 1¼" BSP Female
- Net Weight 5.0kg
- Lead Length 10m
- Suitable Fluids Clean or grey water of neutral pH containing up to 10% small soft solids or 1% fine solids
MATERIALS
- Impeller Polycarbonate
- Pump Shaft Stainless Steel
- Motor Shell Stainless Steel
- Mechanical Seal Silicon Carbide Ceramic
- Elastomers Nitrile Rubber
Grundfos 4" Submersible Pump
SP 1A - 1 x 240 V - 32 mm Discharge
Grundfos SP pumps represent state-of-the-art hydraulic design. Built to deliver optimum efficiency during periods of high demand, the SP pumps provide low long-term costs and high operating reliability regardless of the application.
The Grundfos SP range offers high efficiency, high resistance to sand and other abrasives, motor burnout protection, and easy maintenance. A complete monitoring and control system is available for constant optimisation of the pumping system.
Features and benefits
- State-of-the-art hydraulics provide high efficiency and low operating costs
- 100 % stainless steel inside and outside
- Sand resistant
- Resistant to aggressive water
- Motor burnout protection
- Dry-running protection
- Monitoring, protection and communication via the MP 204 protection unit and the R100 remote control.
Applications
The pumps are suitable for:
- Groundwater supply to waterworks
- Irrigation in horticulture and agriculture
- Groundwater lowering
- Pressure boosting
- Industrial applications.
Grundfos 4" Submersible Pump
SP 2A - 1 x 240 V - 32 mm Discharge
Grundfos SP pumps represent state-of-the-art hydraulic design. Built to deliver optimum efficiency during periods of high demand, the SP pumps provide low long-term costs and high operating reliability regardless of the application.
The Grundfos SP range offers high efficiency, high resistance to sand and other abrasives, motor burnout protection, and easy maintenance. A complete monitoring and control system is available for constant optimisation of the pumping system.
Applications
The pumps are suitable for groundwater supply to waterworks, irrigation in horticulture and agriculture, groundwater lowering, pressure boosting and industrial applications.
Grundfos 4" Submersible Pump
SP 3A - 1 x 240 V - 32 mm Discharge
Grundfos SP pumps represent state-of-the-art hydraulic design. Built to deliver optimum efficiency during periods of high demand, the SP pumps provide low long-term costs and high operating reliability regardless of the application.
The Grundfos SP range offers high efficiency, high resistance to sand and other abrasives, motor burnout protection, and easy maintenance. A complete monitoring and control system is available for constant optimisation of the pumping system.
Features and benefits
- State-of-the-art hydraulics provide high efficiency and low operating costs
- 100 % stainless steel inside and outside
- Sand resistant
- Resistant to aggressive water
- Motor burnout protection
- Dry-running protection
- Monitoring, protection and communication via the MP 204 protection unit and the R100 remote control.
Applications
The pumps are suitable for:
- Groundwater supply to waterworks
- Irrigation in horticulture and agriculture
- Groundwater lowering
- Pressure boosting
- Industrial applications.
Grundfos 4" Submersible Pump
SP 5A - 1 x 240 V - 40 mm Discharge
Grundfos SP pumps represent state-of-the-art hydraulic design. Built to deliver optimum efficiency during periods of high demand, the SP pumps provide low long-term costs and high operating reliability regardless of the application.
The Grundfos SP range offers high efficiency, high resistance to sand and other abrasives, motor burnout protection, and easy maintenance. A complete monitoring and control system is available for constant optimisation of the pumping system.
Features and benefits
- State-of-the-art hydraulics provide high efficiency and low operating costs
- 100 % stainless steel inside and outside
- Sand resistant
- Resistant to aggressive water
- Motor burnout protection
- Dry-running protection
- Monitoring, protection and communication via the MP 204 protection unit and the R100 remote control.
Applications
The pumps are suitable for:
- Groundwater supply to waterworks
- Irrigation in horticulture and agriculture
- Groundwater lowering
- Pressure boosting
- Industrial applications.
Grundfos 4" Submersible Pump
SP 7 - 1 x 240 V - 40 mm Discharge
Grundfos SP pumps represent state-of-the-art hydraulic design. Built to deliver optimum efficiency during periods of high demand, the SP pumps provide low long-term costs and high operating reliability regardless of the application.
The Grundfos SP range offers high efficiency, high resistance to sand and other abrasives, motor burnout protection, and easy maintenance. A complete monitoring and control system is available for constant optimisation of the pumping system.
Features and benefits
- State-of-the-art hydraulics provide high efficiency and low operating costs
- 100 % stainless steel inside and outside
- Sand resistant
- Resistant to aggressive water
- Motor burnout protection
- Dry-running protection
- Monitoring, protection and communication via the MP 204 protection unit and the R100 remote control.
Applications
The pumps are suitable for:
- Groundwater supply to waterworks
- Irrigation in horticulture and agriculture
- Groundwater lowering
- Pressure boosting
- Industrial applications.
Grundfos 4" Submersible Pump
SP 9 - 1 x 240 V - 50 mm Discharge
Grundfos SP pumps represent state-of-the-art hydraulic design. Built to deliver optimum efficiency during periods of high demand, the SP pumps provide low long-term costs and high operating reliability regardless of the application.
The Grundfos SP range offers high efficiency, high resistance to sand and other abrasives, motor burnout protection, and easy maintenance. A complete monitoring and control system is available for constant optimisation of the pumping system.
Features and benefits
- State-of-the-art hydraulics provide high efficiency and low operating costs
- 100 % stainless steel inside and outside
- Sand resistant
- Resistant to aggressive water
- Motor burnout protection
- Dry-running protection
- Monitoring, protection and communication via the MP 204 protection unit and the R100 remote control.
Applications
The pumps are suitable for:
- Groundwater supply to waterworks
- Irrigation in horticulture and agriculture
- Groundwater lowering
- Pressure boosting
- Industrial applications.
Grundfos 4" Submersible Pump
SP 11 - 1 x 240 V - 50 mm Discharge
Grundfos SP pumps represent state-of-the-art hydraulic design. Built to deliver optimum efficiency during periods of high demand, the SP pumps provide low long-term costs and
high operating reliability regardless of the application.
The Grundfos SP range offers high efficiency, high resistance to sand and other abrasives, motor burnout protection, and easy maintenance. A complete monitoring and control system is available for constant optimisation of the pumping system.
Features and benefits
- State-of-the-art hydraulics provide high efficiency and low operating costs
- 100 % stainless steel inside and outside
- Sand resistant
- Resistant to aggressive water
- Motor burnout protection
- Dry-running protection
- Monitoring, protection and communication via the MP 204 protection unit and the R100 remote control.
Applications
The pumps are suitable for:
- Groundwater supply to waterworks
- Irrigation in horticulture and agriculture
- Groundwater lowering
- Pressure boosting
- Industrial applications.
The Grundfos SP 14 is a premium 4″ stainless steel submersible bore pump designed for reliable groundwater supply, irrigation, and pressure boosting applications. Built with advanced hydraulic efficiency and full stainless steel construction, the SP series delivers long service life, excellent resistance to sand and abrasives, and dependable operation in demanding environments. The pump is suitable for both domestic and commercial water systems where durability, efficiency, and consistent performance are essential.
FEATURES
- High efficiency hydraulic design for reduced operating costs
- 100% stainless steel construction for corrosion resistance and durability
- Sand resistant design for extended pump life in abrasive conditions
- Motor burnout protection for improved reliability
- Suitable for continuous duty applications
- Easy maintenance and serviceability
- Optional monitoring and control compatibility
APPLICATIONS
- Groundwater extraction and bore water supply
- Irrigation systems in agriculture and horticulture
- Pressure boosting systems
- Industrial water transfer
- Water supply for rural and commercial properties
SPECIFICATIONS
- Pump Type: Grundfos SP 14 Submersible Bore Pump
- Pump Diameter: 4 inch (100 mm nominal)
- Flow Range: Up to approximately 14 m³/h (model dependent)
- Head Range: Up to approximately 180 m (model dependent)
- Power Range: 1.1 kW to 7.5 kW depending on stage configuration
- Voltage Options: Single phase 230–240V and three phase 380–415V
- Motor Type: MS series submersible motor
- Discharge Connection: Rp 2″
- Maximum Pump Diameter: Approximately 95–139.5 mm depending on model
- Construction: Stainless steel pump and components
- Duty: Continuous duty rated
|
Grundfos Submersible AP 12 Single Stage The Grundfos Unilift AP 12 Sumersible Pumps are suited for temporary and permanent installations. While being single-stage pumps they are also available in different phases and power supply. Either Single phase in 50Hz or Three phase in 60Hz power supply. All Unilift AP pumps are equipped with a plug to connect to mains power. With a semi-open impeller the Unilift AP 12 also allows you the option of a float switch. Whether it is for automatic or manual operation, choose the float switch supply you desire. 3-phase versions include a starter box connected to the float switch while single-phase versions have an inbuilt thermal switch. Mostly made of stainless steel, the pump also contains a stainless steel sleeve designed for cooling when in use. Outlet connection is located at the top of the pump. Reliable and simple to install – let the Grundfos Unilift AP 12 Sumbersible pump assist you in your next project. Applications:
|
The Grundfos Unilift AP35B is a high quality stainless steel submersible pump designed for pumping wastewater, effluent, surface water and drainage liquids containing solids up to 35mm. Built with corrosion resistant materials and a vortex impeller, this pump delivers reliable performance in demanding domestic, commercial and light industrial applications.
The pump is supplied with an integrated float switch for automatic operation and includes a 10m power cable for convenient installation. It can be installed free standing or connected to an auto coupling system, making maintenance simple and efficient. The stainless steel construction ensures long service life even in aggressive environments.
FEATURES
- Stainless steel construction for durability and corrosion resistance
- Vortex impeller allowing passage of solids up to 35mm
- Integrated float switch for automatic start and stop
- Double shaft seal with oil chamber for enhanced motor protection
- Thermal overload protection built into the motor
- Suitable for free standing or auto coupling installation
- Compact and portable design with carrying handle
SPECIFICATIONS
- Maximum flow: 5 l/s
- Maximum head: 11 m
- Power input P1: 1 kW
- Rated power P2: 0.66 kW
- Voltage: 1 x 220–240 V
- Frequency: 50 Hz
- Current: 4.6 A
- Speed: 2810 rpm
- Discharge size: 2 inch Rp
- Maximum particle size: 35 mm
- Liquid temperature range: 0°C to 40°C
- Maximum installation depth: 7 m
- Cable length: 10 m
- Enclosure class: IP68
- Insulation class: F
- Net weight: 10.3 kg
APPLICATIONS
- Wastewater and effluent pumping
- Septic and greywater systems
- Drainage pits and sump applications
- Groundwater and surface water removal
- Construction and site dewatering
- Domestic and commercial drainage systems
Grundfos Submersible AP Basic 35B & 50B - Product Specification
The Franklin Electric FPS-1A Series 4″ submersible bore pumps are precision-engineered stainless steel pumps designed for low-flow, high-head groundwater applications. Delivering up to 18 litres per minute, this series is ideal for domestic water supply, pressure boosting, tank filling, and rural installations where reliable performance and efficiency are essential. The Tri-Seal hydraulic design provides enhanced durability and extended service life when paired with Franklin Electric 4″ submersible motors.
Compact 4″ construction allows installation in standard boreholes while multiple stage options enable selection for varying depth and pressure requirements. These pumps are suitable for clean water applications where dependable performance is required over long operating periods.
FEATURES
- Corrosion-resistant stainless steel construction for durability and long service life
- Tri-Seal hydraulic design for improved reliability and efficiency
- Multiple stage options to suit varying head requirements
- Designed for compatibility with Franklin Electric 4″ submersible motors
- Compact diameter suitable for standard bore installations
- Reliable low-flow performance for domestic and rural water supply systems
APPLICATIONS
- Domestic bore water supply
- Tank filling and storage transfer
- Pressure boosting systems
- Rural and livestock watering
- Commercial water supply requiring lower flow rates
- Irrigation systems requiring controlled flow delivery
SPECIFICATIONS
- Flow Rate: Up to 18 LPM (1 m³/hr)
- Pump Diameter: 4″ submersible design
- Maximum Pump Diameter with Cable Guard: 99.1 mm
- Motor Diameter: 95 mm
- Outlet Size: 1¼″ BSPP female
- Power Range: 0.37 kW to 1.5 kW depending on stage model
- Stages Available: 9, 13, 17, 26, 35
- Construction: Stainless steel pump end
- Frequency: 50 Hz
- Motor Compatibility: Franklin Electric 4″ submersible motors
- Dimensions and weight vary depending on stage configuration
The Franklin FPS 1B 4-inch stainless steel submersible pump end is designed for reliable groundwater pumping in domestic, agricultural, and commercial bore applications. Built with corrosion-resistant stainless steel construction and Tri-Seal hydraulic design, this pump delivers efficient performance at 25 LPM flow rates while maintaining durability in demanding water conditions.
Designed to suit standard 4-inch submersible motors, the FPS 1B series provides dependable water supply for bores, tanks, irrigation systems, and pressure systems where consistent performance and long service life are essential.
SPECIFICATIONS
- Flow Rate: 25 LPM (1.5 m³/hr)
- Pump Type: 4" Submersible Pump End
- Construction: Stainless Steel
- Outlet Size: 1¼" BSPP
- Maximum Diameter with Cable Guard: 99.1 mm
- Motor Diameter Compatibility: 95 mm
- Stages Available: 8, 12, 16, 24, 32
- Power Range: 0.37 kW to 1.5 kW (½ HP to 2 HP)
- Frequency: 50 Hz
- Configuration: Tri-Seal Hydraulic System
- Mounting: Suits 4" Franklin Electric Submersible Motors
FEATURES
- Tri-Seal hydraulic design for improved efficiency and durability
- Corrosion-resistant stainless steel construction
- Compact 4-inch bore compatibility
- Multiple stage options to suit different head requirements
- Designed for long service life in groundwater applications
- Compatible with industry-standard 4" submersible motors
APPLICATIONS
- Domestic bore water supply
- Rural and farm water systems
- Tank filling and water transfer
- Pressure boosting systems
- Irrigation and garden watering
- Livestock watering systems
The Franklin FPS Series 4″ stainless steel submersible pumps with Tri-Seal design are built for reliable bore water supply in residential, agricultural, and commercial applications. Designed for durability and long service life, these pumps feature corrosion resistant stainless steel construction and efficient hydraulic performance for consistent flow and pressure. The Tri-Seal floating impeller system improves sand handling capability and reduces wear, making them suitable for demanding groundwater environments.
FEATURES
- Tri-Seal floating impeller technology improves sand resistance and extends pump life
- Corrosion resistant stainless steel construction for durability and reliability
- Designed to suit Franklin Electric 4″ submersible motors
- High efficiency hydraulic design for reduced operating costs
- Compact 4″ diameter suitable for standard bore installations
- Wide power range to suit multiple duty requirements
SPECIFICATIONS
- Flow Rate: 30 LPM (2 m³/hr)
- Pump Series: FPS-2A-XX-TS Tri-Seal
- Pump Diameter: Maximum 99.1 mm with cable guard
- Motor Diameter: 95 mm
- Discharge Size: 1¼″ BSPP
- Power Range: 0.37 kW to 5.5 kW (½ HP to 7.5 HP depending on model)
- Stages: 6 to 78 stages depending on model
- Construction: Stainless steel pump end
- Frequency: 50 Hz
- Compatible Motors: Franklin Electric 4″ submersible motors
APPLICATIONS
- Domestic bore water supply
- Irrigation and rural water systems
- Livestock watering
- Pressure boosting from wells and tanks
- Commercial and agricultural water transfer
The Franklin FPS 3A Tri-Seal stainless steel submersible pump range is designed for reliable groundwater pumping in domestic, agricultural, and commercial applications. Built with corrosion-resistant stainless steel construction and precision hydraulic components, these 4-inch bore pumps deliver consistent performance with high efficiency across a wide operating range. The Tri-Seal design enhances durability and motor protection, making the pump suitable for long-term continuous operation when paired with Franklin Electric submersible motors.
FEATURES
- Stainless steel construction for corrosion resistance and long service life
- Tri-Seal hydraulic design for improved efficiency and reliability
- Compact 4-inch bore diameter suitable for narrow wells and bores
- Designed for compatibility with Franklin Electric 4-inch submersible motors
- Wide range of stage options to suit different head requirements
- High efficiency performance across operating range
SPECIFICATIONS
- Flow rate up to 45 LPM (3 m³/hr)
- Power range 0.37 kW to 5.5 kW depending on model
- Horsepower range 1/2 HP to 7.5 HP
- Number of stages 4 to 62 depending on model
- Discharge size 1 1/4" BSPP
- Maximum pump diameter 99.1 mm with cable guard
- Motor diameter 95 mm
- Pump dimensions vary by stage configuration
- Weights vary depending on model and motor combination
APPLICATIONS
- Domestic water supply from bores and wells
- Rural and agricultural water transfer
- Irrigation systems and pressure boosting
- Stock watering systems
- Commercial and industrial water supply
The Franklin FPS 3B Tri-Seal Series 4-inch submersible pumps are engineered for reliable bore and water transfer applications where consistent flow and long service life are critical. Built with corrosion-resistant stainless steel construction and precision multi-stage hydraulics, these pumps deliver efficient performance across a wide range of head requirements. The Tri-Seal design enhances durability and protection in demanding environments, making them suitable for agricultural, domestic, and commercial water supply systems. Designed to pair with Franklin Electric 4" motors, the compact pump profile allows installation in standard bore casings while maintaining strong hydraulic efficiency.
FEATURES
- Stainless steel construction for corrosion resistance and extended service life
- Tri-Seal hydraulic design for improved durability and reliability
- Multi-stage centrifugal design for high efficiency across varying heads
- Compatible with Franklin Electric 4" submersible motors
- Compact 4" diameter suitable for standard bore installations
- Designed for continuous duty operation in demanding water supply systems
SPECIFICATIONS
- Flow rate: 60 LPM (3.5 m³/hr nominal)
- Pump series: FPS-3B-XX-TS Tri-Seal
- Power range: 0.55 kW to 5.5 kW (depending on stage configuration)
- Horsepower range: 0.75 HP to 7.5 HP
- Stages available: 6 to 52 stages
- Outlet connection: 1 1/4" BSPP
- Maximum pump diameter with cable guard: 99.1 mm
- Motor diameter compatibility: 95 mm (Franklin 4" motor)
- Construction: Stainless steel pump end
- Frequency: 50 Hz
APPLICATIONS
- Domestic water supply from bores and wells
- Irrigation and agricultural water transfer
- Pressure boosting systems
- Stock watering and rural water supply
- Commercial and light industrial water systems
The Franklin FPS 4″ Tri Seal submersible pump range is designed for reliable water transfer, irrigation, and pressure boosting applications where durability and efficiency are essential. Built with corrosion resistant stainless steel construction and precision engineered hydraulics, this pump series delivers consistent performance across a wide operating range.
The Tri Seal design provides enhanced motor protection and long service life when paired with Franklin Electric submersible motors. Multiple stage options are available to suit different head requirements, making the range suitable for domestic, agricultural, and commercial installations.
FEATURES
- Stainless steel pump construction for corrosion resistance
- Tri Seal motor protection design for extended service life
- High efficiency hydraulics for reliable performance
- Multiple stage configurations available for varying head requirements
- Designed for use with 4″ Franklin Electric submersible motors
- Compact diameter suitable for standard bore installations
SPECIFICATIONS
- Flow Rate: 70 LPM (4 m³/hr)
- Pump Diameter: Maximum 99.1 mm with cable guard
- Motor Diameter: 95 mm
- Outlet Size: 1¼″ BSPP
- Power Range: 0.75 kW to 5.5 kW depending on model
- Stages: 7 to 44 stages depending on model
- Frequency: 50 Hz
- Construction: Stainless steel pump end
- Mounting: 4″ submersible motor compatible
APPLICATIONS
- Domestic water supply
- Irrigation systems
- Pressure boosting
- Water transfer
- Agricultural water pumping
- Commercial water systems
- Tank filling and storage transfer
The Franklin FPS 6A Series 4-inch stainless steel submersible pumps are engineered for high capacity bore water supply applications where increased flow rates are required without compromising efficiency or reliability. Designed with precision multi-stage hydraulics and corrosion resistant stainless steel construction, this range delivers dependable performance across a wide range of heads for agricultural, commercial, and large domestic systems.
The Tri Seal hydraulic design improves durability and motor protection, while compatibility with Franklin Electric 4″ submersible motors ensures reliable long-term operation. With multiple stage configurations available, the FPS 6A series provides flexible solutions for demanding high flow installations.
FEATURES
- High capacity design delivering up to 100 LPM performance
- Stainless steel construction for corrosion resistance and durability
- Tri Seal hydraulic system for improved efficiency and extended service life
- Multi-stage centrifugal design for varying head requirements
- Compatible with Franklin Electric 4″ submersible motors
- Compact diameter suitable for standard bore installations
SPECIFICATIONS
- Flow Rate: 100 LPM (6 m³/hr)
- Pump Series: FPS-6A-XX
- Power Range: 0.55 kW to 5.5 kW depending on model
- Horsepower Range: 0.75 HP to 7.5 HP
- Stages: 6 to 42 stages depending on model
- Outlet Connection: 2″ BSPP
- Maximum Pump Diameter with Cable Guard: 99.1 mm
- Motor Diameter Compatibility: 95 mm
- Construction: Stainless steel pump end
- Frequency: 50 Hz
APPLICATIONS
- High demand domestic water supply
- Agricultural irrigation systems
- Commercial and industrial water transfer
- Pressure boosting systems
- Livestock and rural water supply
- Tank filling and storage transfer
The Franklin FPS-9A 4 inch submersible pump is a high capacity stainless steel bore pump designed for demanding water transfer and supply applications. Built for reliability and efficiency, this pump range delivers strong flow performance up to 150 litres per minute while maintaining durability in harsh groundwater environments. The FPS series pump ends are designed to pair with Franklin Electric 4 inch submersible motors, providing a proven solution for agricultural, commercial, and water supply installations where dependable performance is essential.
FEATURES
- High capacity 150 litres per minute performance for demanding applications
- Stainless steel construction for corrosion resistance and long service life
- Designed for coupling with Franklin Electric 4 inch submersible motors
- Multiple stage options to suit different head requirements
- Slimline pump diameter suitable for standard bore installations
- Engineered for efficiency across a wide operating range
SPECIFICATIONS
- Pump Type: 4 inch submersible bore pump end
- Flow Rate: Up to 150 LPM (9 m³/hr)
- Power Range: 1.1 kW to 5.5 kW depending on model
- Horsepower Range: 1.5 HP to 7.5 HP
- Stages: 7 to 31 depending on model
- Outlet Size: 2 inch BSPP
- Maximum Diameter with Cable Guard: 99.1 mm
- Motor Diameter Compatibility: 95 mm Franklin 4 inch motors
- Construction: Stainless steel pump components
APPLICATIONS
- Agricultural irrigation and water transfer
- Stock watering systems
- Domestic and rural water supply
- Commercial water pumping installations
- Tank filling and pressure systems
- Groundwater extraction from bores and wells
The Franklin FPS Series 4" submersible bore pumps are high capacity stainless steel pumps designed for reliable water transfer in demanding groundwater and irrigation applications. Built with corrosion resistant stainless steel construction, these pumps deliver strong performance with efficient operation and long service life when paired with Franklin Electric motors.
Designed for boreholes, agricultural irrigation, water supply, pressure systems and commercial pumping applications, the FPS 200LPM range provides dependable flow rates while maintaining excellent efficiency across varying head conditions. Multiple stage configurations are available to suit different depth and pressure requirements.
SPECIFICATIONS
- Flow Rate: Up to 200 LPM (12 m³/hr)
- Pump Diameter: 4" submersible design
- Outlet Size: 2" BSPP female thread
- Construction: Stainless steel pump end
- Motor Compatibility: Franklin Electric 4" submersible motors
- Maximum Pump Diameter with Cable Guard: 99.1 mm
- Motor Diameter: 95 mm
- Available Stage Options: 6, 9, 17 and 26 stages depending on model
- Power Range: 1.5 kW to 5.5 kW depending on configuration
FEATURES
- High capacity performance suitable for demanding water supply applications
- Corrosion resistant stainless steel construction for long service life
- Multiple stage options to suit varying bore depths and pressure requirements
- Designed for compatibility with Franklin Electric submersible motors
- Efficient hydraulic performance across operating range
- Compact 4" diameter suitable for standard bore installations
- Reliable operation for agricultural, commercial and domestic pumping systems
APPLICATIONS
- Bore water pumping
- Agricultural irrigation systems
- Stock watering
- Water transfer and storage filling
- Pressure boosting systems
- Commercial and industrial water supply
- Rural and domestic groundwater supply
The Franklin Electric FPS-16A Series 4″ submersible bore pumps are designed for high-capacity water transfer applications where strong performance and durability are essential. Built with corrosion-resistant stainless steel construction, this series delivers up to 270 litres per minute, making it ideal for irrigation, agricultural supply, commercial water systems, and large domestic installations. These pumps are engineered to pair with Franklin Electric 4″ motors and provide reliable operation across a wide range of heads and flow requirements.
SPECIFICATIONS
- Flow rate: Up to 270 LPM (16 m³/hr)
- Pump diameter: 4″ (max diameter with cable guard 99.1 mm)
- Motor diameter: 95 mm
- Discharge size: 2″ BSPP female
- Power range: 1.1 kW to 5.5 kW depending on stage model
- Stages available: 5, 7, 11, 19, 24
- Construction: Stainless steel pump end
- Frequency: 50 Hz
- Suitable motor: Franklin Electric 4″ submersible motor
- Maximum dimensions vary by stage configuration
- Performance curves available for full operating range
FEATURES
- High capacity design suitable for demanding water supply applications
- Corrosion resistant stainless steel construction for long service life
- Engineered for compatibility with Franklin Electric submersible motors
- Multiple stage options to suit varying head and flow requirements
- Compact 4″ diameter suitable for standard bore installations
- Reliable hydraulic performance across a wide operating range
APPLICATIONS
- Agricultural irrigation systems
- Commercial and industrial water supply
- Large domestic bore water systems
- Water transfer and storage tank filling
- Pressure boosting systems
- Livestock watering and rural supply
Lowara Submersible 4" Pumps
The e-GS series is a robust 4” pump designed for long life. It’s built mainly in stainless steel, has casted discharge and a special floating impeller design to enhance the wear resistance and to maintain the performance over time.
The e-GS series is designed specially to be used in 4” wells and its ideal for use in irrigation systems, pressure boosting, geothermal systems and fountain applications.
All e-GS pumps can be coupled to 4” NEMA standard motors.
Specifications
- Delivery: up to 21 m³/h
- Head: up to 340 m
- Power supply: both single and three-phase 50 and 60 Hz
- Power: from 0.25 kW up to 7.50 kW
- Temperature of pumped liquid: to 35 °C
- Maximum immersion depth: 300 m
The Grundfos UNILIFT KP150 is a compact, high-quality stainless steel submersible pump designed for pumping non-aggressive water and grey water in residential, commercial, and light industrial applications. Built with durable corrosion-resistant materials and reliable motor protection, this pump can be used as a portable unit or in permanent installations both indoors and outdoors. The integrated float switch provides automatic start and stop operation, making it ideal for sump drainage, water transfer, and dewatering tasks where dependable performance is essential.
FEATURES
- Stainless steel pump housing and impeller for corrosion resistance and long service life
- Integrated float switch for automatic operation and protection against dry running
- Compact and portable design with carrying handle for easy installation and transport
- Semi-open impeller allowing passage of particles up to 10 mm
- Double shaft seal with grease chamber for improved reliability
- Continuous motor cooling via pumped liquid for extended lifespan
- Internal thermal overload protection for motor safety
APPLICATIONS
- Drainage of grey water and non-aggressive water
- Sump and pit emptying in domestic and commercial environments
- Surface water and rainwater removal
- Emergency dewatering and water transfer
- General purpose pumping inside and outside buildings
SPECIFICATIONS
- Maximum flow: 2.36 l/s (approx. 142 l/min)
- Maximum head: 5.5 m
- Rated head: 2.94 m
- Maximum particle size: 10 mm
- Liquid temperature range: 0°C to 50°C
- Power input (P1): 300 W
- Rated power (P2): 0.15 kW
- Voltage: 1 x 230–240 V, 50 Hz
- Rated current: 1.3 A
- Connection size: Rp 1¼"
- Enclosure class: IP68
- Insulation class: F
- Maximum installation depth: 2 m
- Cable length: 5 m with AU plug
- Net weight: 6.3 kg
The Grundfos Unilift KP250 range is a compact stainless steel submersible pump designed for pumping non aggressive water and grey water in residential, commercial, and light industrial applications. Built with corrosion resistant stainless steel components and a reliable motor design, the KP250 can be installed permanently or used as a portable drainage solution both indoors and outdoors.
The pump features a semi open impeller capable of handling particles up to 10 mm, making it suitable for groundwater, rainwater, and surface water removal. Continuous motor cooling is achieved through the pumped liquid, ensuring dependable operation even during extended use.
FEATURES
- Compact stainless steel construction for durability and corrosion resistance
- Semi open impeller suitable for light solids handling up to 10 mm
- Portable or fixed installation flexibility
- Integrated motor protection with thermal overload protection
- Continuous motor cooling through pumped liquid
- Maintenance free carbon bearings for long service life
- Double shaft seal design for improved reliability
SPECIFICATIONS
- Maximum flow: 3.11 L/s (approx. 187 L/min)
- Maximum head: 7.5 m
- Maximum particle size: 10 mm
- Liquid temperature range: 0°C to 50°C
- Connection size: 1 1/4" Rp (BSP)
- Maximum installation depth: 2 m
- Power input (P1): 480 W
- Voltage: 1 x 230–240 V, 50 Hz
- Current: 2.2 A
- Enclosure class: IP68
- Insulation class: F
- Cable length: 5 m
- Weight: 7 kg
APPLICATIONS
- Grey water pumping
- Groundwater and rainwater drainage
- Sump and pit emptying
- Flooded basement and utility room drainage
- Domestic and commercial water transfer