Richdel - Irritrol Series Valves
Standard Control (SC) and Flow Control (FC)
Richdel 2400 MT/F Series - Product Specification
Richdel 204/5 Series - Product Specification
Richdel FC 25 (IV25FC) - Product Specification
Brass Inline Spring Check Valve
Brass inline spring check valves are commonly used to prevent backflow contamination for through pressure pipes in a variety of applications. A possible application where a brass inline spring check valve could be used is where there is a tank system linked with mains water that must be prevented from becoming contaminated. Brass inline spring check valves are suitable to both residential and industrial applications
PVC Pressure Vanstone Flange
PVC Pressure Van Stone Flanges are made of two pieces: a flange with a PVC pressure pipe socket, and a table D & E / ANSI rotating ring. The rotating ring makes bolt alignment easy by moving freely around the flange even when it’s glued to pipe. The bolt holes are pre-drilled. These flanges are chemical and corrosion resistant. Primer and solvent recommended for optimal use. Rubber Gaskets sold separately.
Suited for pressure applications up to 1800kpa (up to 50° Celsius). Table D & E / ANSI drilling.
Commonly used in irrigation systems, pools, plumbing, and industrial applications.
Our PVC Slip Fixes are Watermark Approved Fittings, manufactured to AS/NZS 1477 Standard.
Netafim Octave 80mm flanged ultrasonic water meter is used for accurate bulk water measurement in agricultural, industrial, commercial and waterworks applications. The ultrasonic design has no moving parts, making it suitable for installations where long-term reliability, low pressure loss and accurate flow data are important.
This DN80 3" model has a flanged connection and stainless steel body construction. It includes a compact digital display built into the meter, IP68 environmental protection and long-life lithium battery power. Confirm flange compatibility, flow range, output requirements and installation conditions before ordering.
Water Meter Netafim Woltman Turbo 50mm flanged is a mechanical bulk water meter used for agricultural, industrial and water supply network applications. The Woltman Silver Turbo WSTsb design is suited to a wide measuring range, making it suitable for installations where both low-flow and high-flow performance need to be considered.
This 50mm model has a Table D flanged connection, cast iron polyester-coated body and AS4747 / NMI 10 Pattern Approval. It is suitable for approved water metering applications, including installations where Murray Darling Basin Pattern Approval requirements need to be considered. Confirm flow range, flange compatibility and installation requirements before ordering.
Non-pulsed water meters are used where water usage needs to be measured by manual meter reading without a pulse output connection. This range includes selected threaded multi-jet water meters and larger flanged tangential paddle water meters.
Threaded Zenner MTKD-N models are suitable for cold water measurement in selected male BSP sizes. Larger tangential paddle flanged meters are suitable for irrigation, agricultural and loaded-water measurement applications. Confirm meter size, connection type, flow range and installation requirements before ordering.
Zenner Threaded Water Meter Specifications
Pulsed water meters are used where water usage needs to be measured and a pulse signal is required for compatible remote readout, monitoring equipment, irrigation controllers or data logging systems. This range includes selected threaded multi-jet water meters and larger flanged tangential paddle water meters.
Threaded Zenner MTKD-N models are suitable for cold water measurement in selected male BSP sizes with 10L pulse output. Larger tangential paddle flanged meters are suitable for irrigation, agricultural and loaded-water measurement applications with 100L pulse output. Confirm meter size, connection type, pulse value, flow range and installation requirements before ordering.
Zenner Threaded Water Meter Specifications
Watts Adjustable Pressure Relief Valves
Product Specifications
Installation Guide
Pressure relief valves open when the pressure in a system exceeds a set value, releasing water and lowering the pressure in the main line. They provide fast and effective pressure relief to prevent pump damage and equipment failure.
A. 15mm (1/2”) female BSP thread inlet & outlet.
Adjustable between 345 kpa to 1200 kpa.
B. 20mm (3/4”) female BSP thread inlet. 15mm (1/2”) female BSP thread outlet.
Adjustable between 345 kpa to 1200 kpa.
C. 20mm (3/4”) female BSP thread inlet. 15mm (1/2”) female BSP thread outlet.
Adjustable between 689 kpa to 2067 kpa.
Sanitation Hose
The Sanitation hose is a flexible suction and discharge hose with a working temperature of -5 to 60 degrees C. It contains high nitrate content to minimise odour permeation.
Commonly used for sanitation systems in boats, caravans and recreational vehicles
Duct Tape, Electrical Tape and PFTE Tape
A range of high quality tapes designed for sealing, insulating, repairing, and securing across plumbing, irrigation, electrical, and general maintenance applications. This collection includes duct tape for heavy duty repairs, electrical insulation tape for safe cable protection, and PTFE thread seal tape for leak proof threaded connections.
Duct tape provides strong adhesion with a durable reinforced backing, making it ideal for temporary repairs, bundling, sealing, and securing materials in demanding environments. Electrical tape is manufactured from flexible PVC with excellent insulation properties, commonly used for protecting electrical wiring, cable joints, and colour coding applications. PTFE thread seal tape is designed to create a reliable seal on threaded pipe fittings by filling thread gaps and reducing friction during installation, helping prevent leaks in water, air, and fluid systems.
These tapes are easy to apply, versatile, and suitable for both professional tradespeople and DIY use across residential, commercial, and industrial projects.
OX Tape Product Catalogue
Elcon Aristoflex rubber flex cable is a heavy duty 0.6/1kV flexible power cable used for suitable pump, motor, generator, construction site, wet environment and temporary power applications. This 3 core and earth range provides a four-core cable configuration with a green/yellow earth core and three additional conductors.
The cable is constructed with Class 5 tinned copper conductors, EPR rubber insulation, an EPDM rubber inner sheath and a black CPE rubber outer jacket. It is designed for demanding flexible power applications, including wet or oily environments and selected submersible pump applications, subject to correct electrical selection and installation.
Xcel Wobbler® Sprinkler
With a unique off-centre rotary action, Senninger’s Xcel-Wobbler sprinkler provides an extremely uniform distribution pattern over a large area. Available in high angle 24° and mid angle 18° the X-Cel Wobbler provides a wind resistant pattern at low pressure with low evaporation loss.
Suitable for above ground sprinkler installation for all row crops and mining heap leach processes.
Features • Inlet 20mm male (15mm option also available) • Colour coded nozzles for easy size identification • New balanced design produces a smooth, stable performance • Only one moving part for longer life • Built for strength and durability using high-impact engineering grade thermoplastics, no metal parts • Flow rates: 0.05 L/s - 0.47 L/s
Product Specification 18 degree Wobbler
Product Specification 24 degree Wobbler
| Nozzle Options | Diameter at Pressures (10.88 - 29psi) |
| a. Gold (2.38mm) | 12.2m to 13.5m |
| b. Lime (2.78mm) | 12.5m to 13.8m |
| c. Lavender (3.18mm) | 12.8m to 14.1m |
| d. Grey (3.57mm) | 13.1m to 14.4m |
| e. Turquoise (3.97mm) | 13.4m to 14.8m |
| f. Yellow (4.37mm) | 13.7m to 15.1m |
| g. Red (4.76mm) | 14.0m to 15.4m |
| h. White (5.16mm) | 14.3m to 15.7m |
| i. Blue (5.56mm) | 14.6m to 15.8m |
Popup Lubricant
Popup lubricant is designed to prevent popup sprinklers from "sticking" and prolong their working life through the prevention of calcium deposits forming, dust build up as well as other contaminants that could damage sliding parts. Popup lube also provides protection via moistening "O" rings.
Popup lube is safe for use on all plastics, polycarbonates, metals, solenoid valves, pvc manifolds, "O" rings, electrical components and connections.
Australian owned and made