Bermad replacement solenoid coil with red protective cap and bundled black leads.
Bermad replacement solenoid coil with red protective cap and bundled black leads.
Close-up of Bermad solenoid label marked S390-2-R, 24 VAC and normally closed.
Close-up of Bermad solenoid label marked S390-2-R, 24 VAC and normally closed.
Bermad solenoid coil with black leads, cap and plunger shown separately.
Bermad solenoid coil with black leads, cap and plunger shown separately.
Bermad replacement solenoid coil with red protective cap and bundled black leads.
Close-up of Bermad solenoid label marked S390-2-R, 24 VAC and normally closed.
Bermad solenoid coil with black leads, cap and plunger shown separately.

IRRIGATION SOLENOID REPLACEMENT COILS

Replace a failed solenoid on a compatible Bermad valve while retaining the existing valve body. This S-390 two-way model uses continuous 24V AC power to operate a normally closed valve.

✓ Power: 24V AC
✓ Model: S-390
✓ Configuration: Two-way, normally closed (NC)
✓ Operation: Non-latching

Bermad replacement solenoid coil with red protective cap and bundled black leads.

This Bermad S-390 replacement suits compatible valves fitted with a two-way, normally closed 24V AC solenoid.

The solenoid remains powered while the valve is open. When the controller switches off the power, the valve closes.

Use with a compatible 24V AC irrigation controller.

Match the replacement to the part number on the existing solenoid. Replacing the solenoid allows a serviceable valve body to remain connected to the pipework.

✓ Manufacturer Part Number
S.390.2.24VAC.NC.2W

✓ Brand
Bermad

✓ Electrical Supply
24V AC.

✓ Operating Type
Normally closed, non-latching.

✓ Supply
Replacement solenoid; complete valve not included.

✓ Control Arrangement
Two-way S-390 solenoid actuator.

Recently viewed