Water Meter Zenner MTKD-N (Multi-Jet) 40mm Male BSP
Water Meter Zenner MTKD-N (Multi-Jet) 40mm Male BSP

WATER METER ZENNER MTKD-N 40MM MALE BSP

Zenner MTKD-N 40mm male BSP water meter for manual cold water measurement in compatible plumbing, irrigation and water supply applications.

✓ 40mm Multi-Jet Water Meter
✓ Male BSP Threaded Connection
✓ Manual Read Meter
✓ PN16 Pressure Rating
✓ Cold Water Metering
✓ MID Approved

Zenner Threaded Water Meter Specifications
Zenner Flanged Water Meter Specifications
Zenner Water Meter Installation Guide

More Information
Product Specifications
Water Meter Zenner MTKD-N (Multi-Jet) 40mm Male BSP
WATER METER ZENNER MTKD-N 40MM MALE BSP
Water Meter Zenner MTKD-N (Multi-Jet) 20mm Male BSP
Water Meter Zenner MTKD-N (Multi-Jet) 20mm Male BSP WM020MI
$207.35 /each
Water Meter Zenner MTKD-N (Multi-Jet) 25mm Male BSP
Water Meter Zenner MTKD-N (Multi-Jet) 25mm Male BSP WM025MI
$245.63 /each
Water Meter Zenner MTKD-N (Multi-Jet) 32mm Male BSP
Water Meter Zenner MTKD-N (Multi-Jet) 32mm Male BSP WM032MI
$378.81 /each
Water Meter Zenner MTKD-N (Multi-Jet) 40mm Male BSP
Water Meter Zenner MTKD-N (Multi-Jet) 40mm Male BSP WM040MI
$546.29 /each
Water Meter Zenner MTKD-N (Multi-Jet) 50mm Male BSP
Water Meter Zenner MTKD-N (Multi-Jet) 50mm Male BSP WM050MI
$622.05 /each
Water Meter Tangential Paddle 80mm Flanged Table D
Water Meter Tangential Paddle 80mm Flanged Table D WM080FL
$805.48 /each
Water Meter Tangential Paddle 100mm Flanged Table D
Water Meter Tangential Paddle 100mm Flanged Table D WM100FL
$976.94 /each
Water Meter Tangential Paddle 150mm Flanged Table E
Water Meter Tangential Paddle 150mm Flanged Table E WM150FL
$1,447.46 /each
Water Meter Tangential Paddle 200mm Flanged Table E
Water Meter Tangential Paddle 200mm Flanged Table E WM200FL
$2,504.15 /each

Water Meter Zenner MTKD-N 40mm Male BSP is a multi-jet dry dial cold water meter used for manual water measurement in compatible plumbing, irrigation and water supply applications. It is suitable where a threaded mechanical water meter is required and pulse output is not needed.

This DN40 / 1 1/2" meter has a male BSP threaded connection, PN16 pressure rating and MID approval. Confirm the flow range, thread connection and installation conditions before ordering.

Zenner Threaded Water Meter Specifications
Zenner Flanged Water Meter Specifications
Zenner Water Meter Installation Guide

✓ Product Type & Size
Zenner MTKD-N multi-jet dry dial water meter, DN40 / 1 1/2".

✓ Connection
Male BSP threaded connection.

✓ Thread Details
Meter thread: G 2".
Connector thread: R 1 1/2".

✓ Application
Suitable for cold water measurement where the meter size, flow range and installation requirements suit the system.

✓ Meter Type
Multi-jet dry dial meter with shielded magnetic coupling.

✓ Reading Type
Manual read meter without pulse output fitted.

✓ Pressure Rating
PN16.

✓ Maximum Operating Temperature
30°C.

✓ Flow Performance
Q1 minimum flow: 640 / 200H L/h.
Q3 permanent flow: 16 m³/h.
Q4 overload flow: 20 m³/h.
Start-up flow rate: less than 40 L/h.

✓ Dimensions
Overall length without connectors: 300mm.
Overall length with connectors: approx. 428mm.
Width: approx. 110mm.
Height: approx. 150mm.
Approximate weight: 4.0kg.

✓ Installation Position
Suitable for horizontal and vertical installation.

✓ Approval
Approved in accordance with MID.

✓ Installation Note
Install in accordance with supplier installation requirements and relevant site requirements. Confirm flow direction and thread size before ordering.

You may also like

Recently viewed