PVC DWV Repair Coupling Slip 150mm is used to join or repair matching PVC DWV pipework. Both sockets fit over 150mm PVC DWV pipe with an approximately 160mm outside diameter.
Unlike a plain coupling, the slip coupling does not have an internal centre stop. This allows the full length of the coupling to slide over the pipe, making it useful for repairs and installations where there is limited space or pipe flexibility.
The coupling can be slid fully onto one section of pipe, allowing the other section to be positioned directly against it. The coupling is then slid back across the joint so that it covers both pipe ends.
Both sockets are joined using PVC priming fluid and suitable non-pressure PVC solvent cement. This joining method is known as a solvent weld joint, or SWJ.
The stated 150mm size is nominal and does not equal the measured pipe outside diameter. Please confirm that the pipe has an approximately 160mm outside diameter before ordering.
PVC DWV pipe and fittings are suitable for use in stormwater, sewerage, wastewater, vent, and other non-pressure applications.
