PVC DWV Level Invert Taper 100mm x 80mm is used to transition between an 80mm pipe and a 100mm fitting.
The 80mm female socket fits over PVC DWV pipe with an approximately 82mm outside diameter. The larger 100mm pipe-size spigot has an approximately 110mm outside diameter and fits into a matching 100mm PVC DWV fitting socket.
The tapered offset design of the fitting allows you to keep the inside bottom of both sides level.
The socket and pipe-size spigot are joined using PVC priming fluid and suitable non-pressure PVC solvent cement. This joining method is known as a solvent weld joint, or SWJ.
The stated 100mm and 80mm sizes are nominal and do not equal the measured outside diameters. Please confirm both connection sizes before ordering.
PVC DWV pipe and fittings are suitable for use in stormwater, sewerage, wastewater, vent, and other non-pressure applications.
