This box contains 50 Hunter PRS30 Pro-Spray pop-up sprinkler bodies for lawn and landscape irrigation using nozzles suited to 210 kPa. Each riser extends 4 inches (100mm) above the body during watering and retracts when the system switches off. Each sprinkler is 155mm tall with the riser retracted.
Each body has a 15mm (1/2") Female BSP inlet and accepts industry-standard female-threaded sprinkler nozzles. Its 210 kPa pressure setting suits standard spray nozzles and MP Rotator minimum-radius settings. Coverage, spray pattern and flow depend on the nozzle fitted. Nozzles sold separately.
The built-in pressure regulator controls nozzle pressure at 210 kPa, helping reduce misting caused by excess pressure. The check valve helps prevent water draining from low-lying sprinklers after watering stops.
A heavy-duty retraction spring returns the riser after watering, while the wiper seal helps keep debris out and reduce leakage around the riser. A brown body cap identifies the PRS30 model.
Each pop-up body is supplied with a grey flush cap. After installing the sprinkler bodies and before fitting nozzles, run water through the system to flush dirt and debris that may have fallen into the pipe line during installation.
5 Year Hunter Warranty
To close an unused sprinkler, fit the Pro-Spray body shut-off cap to the body, or the shut-off nozzle in place of the watering nozzle.
Hunter Pro-Spray Pop-Up Body Brochure
Hunter Pro-Spray Pop-Up Body Specifications
Video 1
Video 2
Video 3
Video 4
Video 5
