40mm Blue Line metric poly pipe rated PN16 in a 50 metre coil, with an approximate 4.0mm wall thickness. Drinking water safe and suitable for irrigation, domestic and rural water supply, and general water distribution applications.
The PN16 rating means the pipe has a nominal pressure rating of 1600 kPa, or 16 bar, at 20°C. The allowable operating pressure reduces when used continuously at higher temperatures.
The SDR11 rating describes the ratio between the pipe’s outside diameter and wall thickness. For pipes of the same diameter, a lower SDR number indicates a thicker wall.
PE100 is a high-strength polyethylene grade used for pressure pipe. It is tough, flexible and resistant to rust, rot, corrosion and internal scale build-up, while its smooth internal bore supports efficient water flow.
Manufactured to AS/NZS 4130, the pipe is commonly joined using 40mm metric compression fittings. Compatible 40mm electrofusion fittings can also be used where a welded connection is preferred.
Prices given on this page are for supply within Western Australia. Please contact us for availability and pricing outside of WA.
For compression fittings to suit Metric poly pipe click here.
Metric HDPE Poly Pipe Blue Line & Black Dimensions
Metric poly pipe dimensions
Approximate dimensions in mm.
| Nominal size / outside diameter |
PN10 / SDR17 | PN12.5 / SDR13.6 | PN16 / SDR11 | |||
|---|---|---|---|---|---|---|
| Internal diameter |
Wall thickness |
Internal diameter |
Wall thickness |
Internal diameter |
Wall thickness |
|
| 20 | - | - | 16.7 | 1.8 | 16.1 | 2.1 |
| 25 | - | - | 21.1 | 2.1 | 20.2 | 2.5 |
| 32 | - | - | 27.0 | 2.6 | 26.0 | 3.1 |
| 40 | - | - | 33.8 | 3.2 | 32.3 | 4.0 |
| 50 | - | - | 42.4 | 4.0 | 40.5 | 4.9 |
| 63 | 55.2 | 4.1 | 53.3 | 5.0 | 51.0 | 6.2 |
| 75 | 65.8 | 4.8 | 63.7 | 5.9 | 61.0 | 7.2 |
| 90 | 79.0 | 5.8 | 76.5 | 7.0 | - | - |
| 110 | 96.5 | 7.0 | 93.3 | 8.6 | 89.4 | 10.6 |
Metric pipe size identifies the nominal outside diameter. Internal diameters and wall thicknesses are approximate mean values and may vary within manufacturing tolerances.
For the same nominal size, a higher PN rating uses a thicker wall and has a smaller internal diameter. PN is the nominal pressure rating in bar at 20°C; temperature derating applies above 20°C.
