25mm black metric PE100 poly pressure pipe rated PN16 in a 6 metre straight length, with an approximate 2.5mm wall thickness. Suitable for irrigation, industrial and civil water transfer, and other compatible pressure applications.
The PN16 rating means the pipe has a nominal pressure rating of 1600 kPa, or 16 bar, at 20°C. The allowable operating pressure reduces when used continuously at higher temperatures.
The SDR11 rating describes the ratio between the pipe’s outside diameter and wall thickness. For pipes of the same diameter, a lower SDR number indicates a thicker wall.
PE100 is a high-strength polyethylene grade used for pressure pipe. It is tough and resistant to rust, rot, corrosion, abrasion and internal scale build-up, while its smooth internal bore supports efficient flow.
Manufactured to AS/NZS 4130, the pipe is commonly joined using 25mm metric compression fittings. Compatible 25mm electrofusion fittings can also be used where a welded connection is preferred.
This is plain black pipe without the blue service-identification stripe normally used for drinking-water pipe. Confirm potable-water certification and project requirements before selecting it for drinking-water supply.
For larger metric poly pipe sizes (63mm+) click here.
Prices given on this page are for supply within Western Australia. Please contact us for availability and pricing outside of WA.
For compression fittings to suit Metric poly pipe click here.
|
|
PN 10 |
PN 12.5 |
PN 16 |
|||
|
|
Wall Thickness (mm) |
|||||
|
Nominal OD (mm) |
Min |
Max |
Min |
Max |
Min |
Max |
|
20 |
- |
- |
1.6 |
1.9 |
1.9 |
2.2 |
|
25 |
- |
- |
1.9 |
2.2 |
2.3 |
2.7 |
|
32 |
- |
- |
2.4 |
2.8 |
2.9 |
3.3 |
|
40 |
- |
- |
3 |
3.4 |
3.7 |
4.2 |
|
50 |
- |
- |
3.7 |
4.2 |
4.6 |
5.2 |
|
63 |
3.8 |
4.3 |
4.7 |
5.3 |
5.8 |
6.5 |
|
75 |
4.5 |
5.1 |
5.5 |
6.2 |
6.8 |
7.6 |
|
90 |
5.4 |
6.1 |
6.6 |
7.4 |
8.2 |
9.2 |
|
110 |
6.6 |
7.4 |
8.1 |
9.1 |
10 |
11.1 |
