PVC DWV 4 Way Riser MF 88° 100mm x 50mm x 50mm x 50mm x 40mm is used to connect four smaller branch pipes into a 100mm vertical PVC DWV pipe run.
The main connection has one 100mm female socket that fits over matching PVC DWV pipe and one 100mm pipe-size spigot that can be inserted into the socket of another matching fitting.
The fitting has four female branch sockets: three 50mm sockets and one 40mm socket. The 50mm sockets fit over matching pipe with an approximately 56mm outside diameter, while the 40mm socket fits over pipe with an approximately 43mm outside diameter.
The 100mm main socket fits over PVC DWV pipe with an approximately 110mm outside diameter. The socket and spigot connections are joined using PVC priming fluid and suitable non-pressure PVC solvent cement. This joining method is known as a solvent weld joint, or SWJ.
The stated 100mm, 50mm and 40mm sizes are nominal and do not equal the measured pipe outside diameters. Please confirm all required pipe sizes before ordering.
PVC DWV pipe and fittings are suitable for use in stormwater, sewerage, wastewater, vent, and other non-pressure applications.
