PVC DWV Reducing Junction 88° FF 150mm x 100mm is used to connect a 100mm branch pipe into a 150mm main PVC DWV pipe run at an 88° angle.
The fitting has three female sockets. Two 150mm sockets continue the main line, while the 100mm socket connects the smaller branch pipe.
The two 150mm sockets fit over PVC DWV pipe with an approximately 160mm outside diameter. The 100mm branch socket fits over PVC DWV pipe with an approximately 110mm outside diameter.
All three sockets are joined using PVC priming fluid and suitable non-pressure PVC solvent cement. This joining method is known as a solvent weld joint, or SWJ.
The stated 150mm and 100mm sizes are nominal and do not equal the measured pipe outside diameters. Please confirm both pipe sizes before ordering.
PVC DWV pipe and fittings are suitable for use in stormwater, sewerage, wastewater, vent, and other non-pressure applications.
