PVC DWV Reducing Junction 45° FF 225mm x 150mm is used to connect a 150mm branch pipe into a 225mm main pipe run at a 45° angle.
The fitting has three female sockets. Two 225mm sockets continue the main line, while the 150mm socket connects the smaller branch pipe.
The two 225mm sockets fit over compatible PVC DWV or PVC stormwater pipe with an approximately 250mm outside diameter. The 150mm branch socket fits over compatible PVC DWV or PVC stormwater pipe with an approximately 160mm outside diameter.
All three sockets are joined using PVC priming fluid and suitable non-pressure PVC solvent cement. This joining method is known as a solvent weld joint, or SWJ.
The stated 225mm and 150mm sizes are nominal and do not equal the measured pipe outside diameters. Please confirm both pipe sizes before ordering.
This PVC DWV fitting suits compatible 225mm and 150mm PVC DWV and PVC stormwater pipe and fittings.
PVC DWV pipe and fittings are suitable for use in stormwater, sewerage, wastewater, vent, and other non-pressure applications.
