PVC DWV Reducing Junction 88° FF 100mm x 50mm is used to connect a 50mm branch pipe into a 100mm main PVC DWV pipe run at an 88° angle.
The junction has three female sockets. Two 100mm sockets continue the main pipe run, while the smaller 50mm socket connects the branch.
The 100mm sockets fit over nominal 100mm PVC DWV pipe with an approximately 110mm outside diameter. The 50mm branch socket fits over nominal 50mm PVC DWV pipe with an approximately 56mm outside diameter.
The sockets are joined using PVC priming fluid and suitable non-pressure PVC solvent cement. This joining method is known as a solvent weld joint, or SWJ.
The stated 100mm and 50mm sizes are nominal and do not equal the measured pipe outside diameters.
PVC DWV pipe and fittings are suitable for use in stormwater, sewerage, wastewater, vent, and other non-pressure applications.
