Poly male x female threaded bush reducing fittings are used to adapt threaded fittings, valves, manifolds and pipework from one size down to another. They are suitable for irrigation, rural water, plumbing and general water systems where a larger female BSP threaded connection needs to be reduced to a smaller female BSP outlet.
Made from UVB stabilised glass fibre reinforced Nylon 6, these bush reducing fittings provide a male BSP outside thread with a smaller female BSP internal thread. Use Teflon thread tape or a suitable sealing compound when installing into compatible BSP threaded fittings.
Poly Camlock Fittings
Used extensively in the chemical and agricultural sector. Excellent chemical resistance. Camlock couplings provide quick and tool-free connect & disconnect functionality and have long been integrated into PE Piping Systems. Generally used on pumps, filters and are particularly useful in fertiliser and chemical applications.
Poly female threaded caps are used to blank off male BSP threaded fittings, outlets and pipework. They are suitable for irrigation, rural water, plumbing and general water systems where an unused male threaded connection needs to be sealed.
Made from UVB stabilised glass fibre reinforced Nylon 6, these caps provide a female BSP threaded connection for compatible male BSP fittings and pipework. Use Teflon thread tape or a suitable sealing compound when installing onto male BSP threads.
Poly cut off risers are used to connect and position sprinklers or fittings in irrigation systems where the final riser height may need to be trimmed during installation. They are suitable for residential, commercial and landscape irrigation where a 15mm threaded riser connection is required.
This 15mm cut off riser has male threaded ends and a 150mm body length. The UV stabilised poly construction is designed for outdoor irrigation use and is suitable for use with compatible poly, PVC and threaded irrigation fittings.
Poly female threaded 90° elbows are used to change the direction of BSP threaded pipework, fittings and valve connections. They are suitable for irrigation, rural water, plumbing and general water systems where a compact right-angle threaded connection is required.
Made from UVB stabilised glass fibre reinforced Nylon 6, these elbows provide female BSP threaded connections at both ends. Use Teflon thread tape or a suitable sealing compound when installing male BSP threads into the elbow.
Poly male x female threaded 90° elbows are used to change the direction of BSP threaded pipework while connecting a female threaded fitting to a male threaded fitting or outlet. They are suitable for irrigation, rural water, plumbing and general water systems where a right-angle male-to-female threaded connection is required.
Made from UVB stabilised glass fibre reinforced Nylon 6, these elbows provide a male BSP thread on one end and a female BSP thread on the other. Use Teflon thread tape or a suitable sealing compound when installing with compatible BSP threaded fittings.
Poly hose nut and tails are used to connect flexible hose to male BSP threaded fittings, outlets and pipework with a removable nut and sealing washer connection. They are suitable for irrigation, rural water, plumbing and general water systems where a hose tail connection needs to be fitted to a male threaded outlet.
Made from UVB stabilised glass fibre reinforced Nylon 6 with an NBR sealing washer, these fittings provide a female BSP nut connection on one end and a hose tail connection on the other. Secure the hose with a suitable hose clamp and ensure the washer is correctly seated during installation.
Poly metric tapping saddles are used to create a Female BSP threaded take-off from metric PE pipe. They are commonly used for adding a branch, riser, valve, sprinkler connection or threaded outlet to an existing poly pipe run without needing to rebuild the full line.
This range includes selected 2 bolt and 4 bolt tapping saddles with pipe sizes from 25mm to 90mm and Female BSP outlet sizes from 1/2" to 1". The first size refers to the metric PE pipe size, while the second size refers to the Female BSP threaded outlet. Confirm pipe size, outlet size, bolt configuration and installation requirements before ordering.
Video 1
LD Barbed 4mm Fittings
Micro fittings are essential components for low-pressure micro irrigation systems
4mm barbed fittings are suitable for use with Flexible Micro Tubing and 4mm Rigid Risers
Applications in: home gardens, landscaping, glasshouses and hanging baskets.
Poly male x male threaded nipple reducing fittings are used to adapt between two different female BSP threaded fittings, valves or pipe connections. They are suitable for irrigation, rural water, plumbing and general water systems where a straight male-to-male threaded connection needs to change size.
Made from UVB stabilised glass fibre reinforced Nylon 6, these nipple reducing fittings provide male BSP threaded connections at both ends in different sizes. Use Teflon thread tape or a suitable sealing compound when installing into female BSP threads.
Poly male threaded nipples are used to connect two female BSP threaded fittings, valves or pipe connections. They are suitable for irrigation, rural water, plumbing and general water systems where a straight male-to-male threaded join is required.
Made from UVB stabilised glass fibre reinforced Nylon 6, these nipples provide male BSP threaded connections at both ends. Use Teflon thread tape or a suitable sealing compound when installing into female BSP threads.
Poly Olson E-Z-EL blue elbows are used to connect pop-up sprinklers to compatible E-Z Tube or funny tube in irrigation systems. They are commonly used to create a flexible swing joint between the sprinkler and pipework, helping make sprinkler positioning and servicing easier.
These blue Olson E-Z-EL elbows have a Male BSP thread for connection to the sprinkler and a female E-Z Tube connection for compatible flexible tube. They are designed for push/twist installation without clamps or glue when used with compatible E-Z Tube.
Funny Pipe
Funny pipe is a highly flexible pipe designed to simplify sprinkler installation providing an alternative to PVC or polyethylene risers. Desiged to be used with EZ-EL (funny pipe) fittings. Funny pipe is useful when it is required for the riser to get around obstacles.
Low Density Poly Pipe is suited for garden beds, landscape irrigation, nurseries, agricultural irrigation, drip irrigation, micro spray irrigation, and low-pressure sprinkler lines. Made from low density polyethylene.
Install each pipe size using LD poly barbed fittings that match the selected pipe size. Push the fitting fully inside the pipe, then secure the connection with a matching ratchet clamp or cobra clamp.
Low density poly pipe has a maximum operating pressure of 300 kPa or 3 BAR at 35°C. At warmer temperatures the pipe material softens and its maximum operating pressure decreases. If the supply pressure exceeds the allowable operating pressure of the pipe, pressure regulation may be required to avoid bursts and disconnected fittings.
Suitable for above-ground and below-ground installation. Take care the pipe is not exposed to sharp surfaces, excessive pulling, tight bends that would cause kinks, or heavy objects weighing down on it.
Low density poly pipe sizes are nominal, meaning the internal and external diameters do not necessarily match the stated size exactly. Use LD poly fittings and matching ratchet or cobra clamps for the selected pipe size.
For LD poly barbed fittings and clamps to suit Low Density poly pipe click here.
Low Density Poly Pipe Specifications
| Nominal Size | Inside Diameter (MM) | Outside Diameter (MM) | Wall Thickness (MM) | PN (Class) | Max Working Pressure (Bar) |
| 13 | 12.9 | 15.14 | 1.25 | 3 | 3 |
| 19 | 19.2 | 21.9 | 1.35 | 3 | 3 |
| 25 | 25.24 | 28.5 | 1.55 | 3 | 3 |
Rural poly pipe in Green Line and Red Line options, covering selected nominal sizes from 3/4" to 2" and coil lengths from 100 to 200 metres. Designed for agricultural irrigation, stock watering, farm water transfer and general rural water-supply applications.
Green Line rural poly pipe is the lighter-duty option, rated to a maximum pressure of 800 kPa. It is lightweight, flexible and easy to handle, making it well suited to basic farm irrigation, stock-water lines and lower-pressure rural applications. A bright green co-extruded line provides clear product identification.
Red Line rural poly pipe is the higher-pressure option, rated to 900 kPa. It provides greater impact strength and resistance to UV exposure and weathering for more demanding agricultural and rural water-transfer installations. A bright red co-extruded line identifies the Red Line range.
Rural poly pipe uses nominal imperial sizing, while the actual outside diameter varies by product. Matching rural compression fittings must be selected for the pipe’s nominal rural size and actual outside diameter.
The range is supplied in flexible coils to support longer pipe runs with fewer joints. Selected Red Line coils are supplied nested and must be ordered in multiples of two, while other products are supplied as standard individual coils.
Prices given on this page are for supply within Western Australia. Please contact us for availability and pricing outside of WA.
For compression fittings to suit rural poly pipe click here.
|
|
Green Line (PN 8) |
|
Red Line (PN 9) |
|
|
Nominal Size (inch) |
Wall Thickness (mm) |
Outside Diameter (mm) |
Wall Thickness (mm) |
Outside Diameter (mm) |
|
3/4" |
1.4 |
21.6 |
- |
- |
|
1 1/2" |
2.2 |
42 |
- |
- |
|
1" |
- |
- |
1.8 |
28.9 |
|
1 1/4" |
- |
- |
2.2 |
36.0 |
|
1 1/2" |
- |
- |
2.6 |
43.2 |
|
2" |
- |
- |
3.4 |
57.6 |
Rural poly pipe in Green Line and Red Line options, covering selected nominal sizes from 3/4" to 2" and coil lengths from 100 to 200 metres. Designed for agricultural irrigation, stock watering, farm water transfer and general rural water-supply applications.
Green Line rural poly pipe is the lighter-duty option, rated to a maximum pressure of 800 kPa. It is lightweight, flexible and easy to handle, making it well suited to basic farm irrigation, stock-water lines and lower-pressure rural applications. A bright green co-extruded line provides clear product identification.
Red Line rural poly pipe is the higher-pressure option, rated to 900 kPa. It provides greater impact strength and resistance to UV exposure and weathering for more demanding agricultural and rural water-transfer installations. A bright red co-extruded line identifies the Red Line range.
Rural poly pipe uses nominal imperial sizing, while the actual outside diameter varies by product. Matching rural compression fittings must be selected for the pipe’s nominal rural size and actual outside diameter.
The range is supplied in flexible coils to support longer pipe runs with fewer joints. Selected Red Line coils are supplied nested and must be ordered in multiples of two, while other products are supplied as standard individual coils.
Prices given on this page are for supply within Western Australia. Please contact us for availability and pricing outside of WA.
For compression fittings to suit rural poly pipe click here.
|
|
Green Line (PN 8) |
|
Red Line (PN 9) |
|
|
Nominal Size (inch) |
Wall Thickness (mm) |
Outside Diameter (mm) |
Wall Thickness (mm) |
Outside Diameter (mm) |
|
3/4" |
1.4 |
21.6 |
- |
- |
|
1 1/2" |
2.2 |
42 |
- |
- |
|
1" |
- |
- |
1.8 |
28.9 |
|
1 1/4" |
- |
- |
2.2 |
36.0 |
|
1 1/2" |
- |
- |
2.6 |
43.2 |
|
2" |
- |
- |
3.4 |
57.6 |
Poly male threaded plugs are used to blank off female BSP threaded fittings, outlets and pipework. They are suitable for irrigation, rural water, plumbing and general water systems where an unused female threaded connection needs to be sealed.
Made from UVB stabilised glass fibre reinforced Nylon 6, these plugs provide a male BSP threaded connection for compatible female BSP fittings and pipework. Use Teflon thread tape or a suitable sealing compound when installing into female BSP threads.
LD Ratchet Clamp
For Use With LD Poly Pipe
Smooth edged clamps require no tools for installation
Compatible with Australian and International tube sizes
Operating pressure range up to 300 kPa and UV stabilised for a long work life
Bag comes in sizes of 100.
Poly female x female threaded reducing sockets are used to connect two different male BSP threaded fittings, pipe ends or threaded components. They are suitable for irrigation, rural water, plumbing and general water systems where a straight female-to-female threaded join needs to change size.
Made from UVB stabilised glass fibre reinforced Nylon 6, these reducing sockets provide female BSP threaded connections at both ends in different sizes. Use Teflon thread tape or a suitable sealing compound when installing male BSP threads into the reducing socket.
Poly risers are used to raise, extend or position threaded sprinkler, fitting and pipework connections in irrigation systems. They are suitable for residential, commercial and rural irrigation where a fixed threaded riser is required between pipework and a sprinkler, valve or fitting.
These risers are UV stabilised for outdoor use and are resistant to weather, termites, fungi and bacteria. They are designed with heavy-duty tapered threads for a strong and reliable seal when installed with compatible threaded fittings.