Total:
PVC DWV Push-On Cap 150mm is used to permanently stop or blank the open end of matching PVC DWV pipe. The solvent-weld socket fits over 150mm PVC DWV pipe with an approximately 160mm outside diameter.
The socket is joined using PVC priming fluid and suitable non-pressure PVC solvent cement. This is known as a solvent weld joint, or SWJ.
The stated 150mm size is the nominal DWV pipe size and does not equal the measured pipe outside diameter. Please confirm that the pipe has an approximately 160mm outside diameter before ordering.
PVC DWV pipe and fittings are suitable for use in stormwater, sewerage, wastewater, vent, and other non-pressure applications.
DWV Push on Cap 150mm
DWV Push on Cap 150mm
DWV Push on Cap 150mm