PVC DWV Slab Repair Coupling – Socket x Into Pipe 50mm is used to reconnect or extend matching PVC DWV pipework at floor or slab level by joining to the inside of an existing pipe.
The fitting has one socket that fits over 50mm PVC DWV pipe with an approximately 56mm outside diameter, and one spigot that fits inside matching 50mm PVC DWV pipe.
The socket and into-pipe spigot are joined using PVC priming fluid and suitable non-pressure PVC solvent cement. This joining method is known as a solvent weld joint, or SWJ.
The stated 50mm size is nominal and does not equal the measured pipe outside diameter. Please confirm that the pipe has an approximately 56mm outside diameter before ordering.
PVC DWV pipe and fittings are suitable for use in stormwater, sewerage, wastewater, vent, and other non-pressure applications.
