PVC DWV Test Opening Tee MF with Cap 150mm is installed in a straight 150mm pipe run to provide a capped opening for testing and inspecting the line.
The fitting has one female socket that fits over compatible 150mm PVC DWV or PVC stormwater pipe with an approximately 160mm outside diameter. The 150mm pipe-size spigot also has an approximately 160mm outside diameter and fits inside a matching PVC DWV or compatible PVC stormwater fitting socket.
The cap closes the test opening during normal use. It can be removed when the pipework needs to be tested, inspected or maintained and refitted afterward. The cap is included with the fitting.
The socket and pipe-size spigot are joined using PVC priming fluid and suitable non-pressure PVC solvent cement. This joining method is known as a solvent weld joint, or SWJ.
The stated 150mm size is nominal and does not equal the measured outside diameter. Please confirm that the pipe and fitting connections suit an approximately 160mm outside diameter before ordering.
This PVC DWV fitting suits compatible 150mm PVC DWV and PVC stormwater pipe and fittings.
PVC DWV pipe and fittings are suitable for use in stormwater, sewerage, wastewater, vent, and other non-pressure applications.
