PVC DWV Test Opening Tee MF with Cap 100mm is installed in a straight 100mm PVC DWV pipe run to provide a capped opening for testing and inspecting the line.
The fitting has one socket that fits over 100mm PVC DWV pipe with an approximately 110mm outside diameter and one pipe-size spigot that can be inserted into the socket of another matching 100mm PVC DWV fitting.
The cap closes the test opening during normal use. It can be removed when the line needs to be tested, inspected or maintained and refitted afterward. The cap is included with the fitting.
The socket and pipe-size spigot are joined using PVC priming fluid and suitable non-pressure PVC solvent cement. This joining method is known as a solvent weld joint, or SWJ.
The stated 100mm size is nominal and does not equal the measured pipe outside diameter. Please confirm the pipe and fitting socket compatibility before ordering.
PVC DWV pipe and fittings are suitable for use in stormwater, sewerage, wastewater, vent, and other non-pressure applications.
