Davey SupercellP yellow pressure tank with bottom pipe connection, representative view
Davey SupercellP yellow pressure tank with bottom pipe connection, representative view
Davey SupercellP yellow pipe-mounted pressure tank with bottom threaded connection.
Davey SupercellP yellow pipe-mounted pressure tank with bottom threaded connection.
Davey SupercellP yellow pressure tank with bottom pipe connection, representative view
Davey SupercellP yellow pipe-mounted pressure tank with bottom threaded connection.

DAVEY SUPERCELL 24018P 18L PRESSURE TANK

The Davey Supercell 24018P is an 18L pipe-mounted steel pressure tank for household, farm and other water-pressure systems. A flexible rubber diaphragm separates the water from compressed air, which pushes water out when a tap opens. This reserve allows smaller amounts of water to be used without starting the pump each time. Fewer starts reduce wear from repeated starting and stopping, helping extend pump life, and can reduce electricity use and running costs. The pipe-mounted tank connects vertically to the pump delivery pipework and needs suitable support.

✓ Nominal tank capacity: 18L
✓ Nominal draw-off: 7.2L at 200–400 kPa pump start/stop pressures
✓ Maximum working pressure: 1000 kPa
✓ Water connection: 1" BSP male thread
✓ Mounting: pipe mounted

Davey Supercell P Specifications & Draw-off Table

Davey Supercell Pressure Tank Installation & Operating Instructions

Davey SupercellP yellow pressure tank with bottom pipe connection, representative view

The Davey Supercell 24018P is an 18L pipe-mounted steel pressure tank for household, farm and other water-pressure systems. A flexible rubber diaphragm separates the water from compressed air, which pushes water out when a tap opens. This reserve allows smaller amounts of water to be used without starting the pump each time. Fewer starts reduce wear from repeated starting and stopping, helping extend pump life, and can reduce electricity use and running costs. The pipe-mounted tank connects vertically to the pump delivery pipework and needs suitable support.

Water connection: 1" BSP male thread. The tank connects vertically to the pump delivery pipework.

Nominal tank volume is the vessel size, not the amount of water available between pump starts. Usable draw-off depends on the pump’s start and stop pressures and the tank air charge. At pump start/stop pressures of 200–400 kPa, usable water draw-off is roughly 40% of nominal tank volume. Other pressure settings and control types give different results.

The steel shell has an epoxy primer and two-part polyurethane enamel finish for corrosion and UV resistance. Inside, a butyl-rubber diaphragm and virgin polypropylene liner keep the water separated from the air cushion and steel shell. The water connection is stainless steel.

The diaphragm and liner are suitable for potable-water applications. Other uses include rainwater and booster systems, irrigation, water-hammer control and suitably designed hydronic expansion or mains-water toilet-flushing systems. Select the tank and controls for the application.

Maximum working pressure is 1000 kPa and maximum water temperature is 90°C. Protect the tank and connected pipework from freezing.

Set the air charge to suit the pump controls and system pressures. Pressure-switch, electronic and variable-speed systems can require different settings; follow the tank and pump/controller instructions.

Install vertically in a covered, dry position with drainage and access for servicing. Support the tank and pipework appropriately. Release the water pressure before checking or adjusting the air charge.

Five-year Davey warranty, subject to its terms.

Davey Supercell P Specifications & Draw-off Table
Davey Supercell Pressure Tank Installation & Operating Instructions

✓ Application
Water storage under pressure for household, farm, irrigation and industrial pressure systems.
Also suitable for appropriately designed water-hammer control, hydronic expansion and mains-water toilet-flushing systems.
Potable-water-grade diaphragm and liner.

✓ Warranty
Five-year Davey warranty, subject to its terms.

✓ Model Specifications
24018P
Nominal tank volume: 18L.
Maximum working pressure: 1000 kPa.
Water connection: 1" BSP male thread.
Mounting: pipe mounted.

✓ Draw-off & Sizing
Nominal vessel volume is not the usable water draw-off.
Draw-off depends on pump start/stop pressures and tank air charge.
Published comparison at a 200–400 kPa pressure-switch range:
24018P: 7.2L nominal draw-off.
This comparison is not a universal pressure-setting recommendation.

✓ Construction
Deep-drawn steel shell.
Butyl-rubber diaphragm is held in place inside the tank (captive design), separating air and water.
Virgin polypropylene liner separates water from the steel shell.
Stainless steel water connection.
Epoxy primer with a two-part polyurethane enamel finish.
Captive diaphragm is non-serviceable; diaphragm failure requires tank replacement.

✓ Installation & Mounting
Install vertically in a covered, dry position.
Provide drainage and access for servicing.
Pipe-mounted configuration; support tank and delivery pipework.

✓ Operating Limits
Maximum working pressure: 1000 kPa.
Maximum water temperature: 90°C.
Protect tank and pipework from freezing.

✓ Air Charge & Controls
Set air charge to suit the pump/controller and system pressures.
Factory pre-charge is not a universal installation setting.
Follow the tank and pump/controller instructions for the applicable control type.
Release water pressure before checking or adjusting air charge.

✓ Dimensions & Weight
24018P: 279mm diameter × 368mm high; shipping weight 4.3kg.

Recently viewed