Compression Poly Metric Tee- Poly x FI BSP - 90mm x 90mm x 3" - Norma
Compression Poly Metric Tee- Poly x FI BSP - 90mm x 90mm x 3" - Norma

POLY COMPRESSION METRIC TEE POLY X POLY X FEMALE BSP 90MM X 90MM X 3" - NORMA

Poly compression metric tee 90mm x 90mm x 3" - NORMA creates a 3" female BSP threaded branch from a 90mm PE metric pipe run.

✓ 90mm x 90mm x 3" Female BSP
✓ Poly x Poly x Female BSP Tee
✓ Suits PE Metric Pipe
✓ WaterMark Approved
✓ Pressure Rating 1250kPa
✓ Check Pipe and Thread Size Before Ordering

Norma Metric Compression Fittings Brochure

More Information
Product Specifications
Compression Poly Metric Tee- Poly x FI BSP - 90mm x 90mm x 3" - Norma
POLY COMPRESSION METRIC TEE POLY X POLY X FEMALE BSP 90MM X 90MM X 3" - NORMA
Compression Poly Metric Tee- Poly x FI BSP - 63mm x 63mm x 2" - Norma
Compression Poly Metric Tee- Poly x FI BSP - 63mm x 63mm x 2" - Norma CONMTF063632
$43.51 /each
Compression Poly Metric Tee- Poly x FI BSP - 90mm x 90mm x 3" - Norma
Compression Poly Metric Tee- Poly x FI BSP - 90mm x 90mm x 3" - Norma CONMTF090903
$97.40 /each
Compression Poly Metric Tee- Poly x FI BSP - 110mm x 110mm x 4" - Norma
Compression Poly Metric Tee- Poly x FI BSP - 110mm x 110mm x 4" - Norma CONMTF1101104
$153.25 /each

Poly compression metric tee poly x poly x female BSP 90mm x 90mm x 3" - NORMA is used to create a 3" female BSP threaded branch from a 90mm PE metric pipe run. It provides 90mm metric compression connections on the main pipe and a 3" female BSP branch for connecting a male BSP threaded fitting, riser, valve or outlet.

This 90mm x 90mm x 3" NORMA metric female tee suits PE metric pipe made in accordance with AS/NZS 4130. It uses blue metric identification ends, a female BSP threaded connection with reinforcing ring, and an easy insertion compression design. The 90mm size is rated to 1250kPa. Confirm the pipe size, thread size, pressure rating and application requirements before ordering.

Norma Metric Compression Fittings Brochure

✓ Product Type & Size
Poly compression metric tee, poly x poly x female BSP, 90mm x 90mm x 3".

✓ Connection
90mm metric compression x 90mm metric compression x 3" female BSP threaded branch.

✓ Application
Used to create a 3" female BSP threaded branch from a 90mm PE metric pipe run.

✓ Pipe Compatibility
Suitable for PE metric pipe made in accordance with AS/NZS 4130.

✓ Pressure Rating
1250kPa.

✓ Approval
WaterMark approved.

✓ Installation
Cut pipe square, deburr if required, mark the insertion depth, insert the pipe fully and tighten the nut until the mark is only just visible. Use PTFE tape or suitable thread sealant on the BSP threaded connection.

✓ Material
Polypropylene copolymer body, nut and holder with NBR metric O-ring and acetal clinching ring.

✓ Reinforcing Ring
304 stainless steel reinforcing ring fitted to the female BSP threaded connection.

✓ Suitable Use
Suitable for irrigation, rural water, mains water connection and general PE metric pipe systems where the fitting size, thread size, pressure rating and installation requirements suit the application.

You may also like

Recently viewed