Compression Poly Metric Flanged Adaptor 63mm x 2"
Compression Poly Metric Flanged Adaptor 63mm x 2"

POLY EASYLOK COMPRESSION METRIC FLANGED ADAPTOR 63MM X 2"

Poly EasyLOK compression metric flanged adaptor for connecting 63mm metric PE pipe to compatible 2" flanged valves, pumps, meters and pipework.

✓ 63mm Poly x 2" Flanged Adaptor
✓ Connects Metric PE Pipe to Flanged Equipment
✓ EasyLOK Compression System
✓ AS 2129 Table E Flange Drill Pattern
✓ PN16 / 1600kPa Pressure Rating
✓ Check Gasket and Bolt Requirements

Philmac EasyLOK Compression Metric Technical Manual

Philmac Compression Metric Installation Guide

More Information
Product Specifications
Product Videos
Compression Poly Metric Flanged Adaptor 63mm x 2"
POLY EASYLOK COMPRESSION METRIC FLANGED ADAPTOR 63MM X 2"
Compression Poly Metric Flanged Adaptor 50mm x 2"
Compression Poly Metric Flanged Adaptor 50mm x 2" COMFA50
$88.86 /each
Compression Poly Metric Flanged Adaptor 63mm x 2"
Compression Poly Metric Flanged Adaptor 63mm x 2" COMFA63
$110.59 /each
Compression Poly Metric Flanged Adaptor 75mm x 3"
Compression Poly Metric Flanged Adaptor 75mm x 3" COMFA75
$144.37 /each
Compression Poly Metric Flanged Adaptor 90mm x 3"
Compression Poly Metric Flanged Adaptor 90mm x 3" COMFA90
$160.13 /each
Compression Poly Metric Flanged Adaptor 110mm x 4"
Compression Poly Metric Flanged Adaptor 110mm x 4" COMFA110
$193.49 /each

Poly EasyLOK compression metric flanged adaptor 63mm x 2" is used to connect 63mm metric PE pipe to a compatible 2" flanged valve, pump, meter, manifold or pipework connection. It provides an EasyLOK compression connection on the poly pipe side and a flanged connection for bolting to matching flanged equipment.

This 63mm x 2" flanged adaptor uses the EasyLOK compression system. Cut the pipe square before installation, assemble the compression components as required, use a suitable gasket between the flanges, and confirm the pipe size, flange size, bolt selection and pressure requirements before ordering.

Philmac EasyLOK Compression Metric Technical Manual

Philmac Compression Metric Installation Guide

✓ Product Type & Size
Poly EasyLOK compression metric flanged adaptor, 63mm x 2".

✓ Connection
Poly compression x flanged connection.

✓ Application
Used to connect 63mm metric PE pipe to compatible 2" flanged valves, pumps, meters, manifolds and pipework.

✓ Pipe Compatibility
Suitable for metric PE pipe.

✓ Flange Standard
AS 2129 Table E drill pattern.

✓ Pressure Rating
PN16 / 1600kPa.

✓ Installation
EasyLOK compression assembly on the pipe side. Cut pipe square, remove burrs if required, assemble the nut, split ring, collet and O-ring onto the pipe, insert the pipe into the fitting body, then tighten the nut to the flange. Use a suitable gasket between flanges and tighten bolts gradually in sequence with suitable washers.

✓ Suitable Use
Suitable for irrigation, rural water and general water supply systems where the fitting size, pipe type, flange size, gasket, bolt selection and pressure rating suit the installation.

Video 1

You may also like

Recently viewed