Micro Single Piece Jet, Red (110 L/h) 180°
Micro Single Piece Jet, Red (110 L/h) 180°
Micro Single Piece Jet, Red (110 L/h) 180°
Micro Single Piece Jet, Red (110 L/h) 180°

MICRO IRRIGATION SPRAY JETS

Micro spray jets water garden beds and landscaped areas with quarter-circle, half-circle, full-circle, strip or mist patterns. Antelco single-piece jets have a winged base for hand installation; the two-piece strip and mist jets use removable snap-ring caps.

✓ Spray patterns: 90°, 180°, 360°, strip and mist
✓ Full-circle coverage: 2-3m diameter at 100kPa
✓ Part-circle coverage: 1-2.1m radius at 100kPa
✓ Single-piece flow: 35-93L/h at 100kPa
✓ Strip jet: Approximately 4.8m end-to-end coverage; 35L/h at 100kPa
✓ Mist jet: Approximately 0.8m diameter; 20L/h at 100kPa
✓ Antelco connection: 4mm male quick thread

Antelco Single Piece Micro Jet Specifications
Antelco Two Piece Micro Jet Specifications

Micro Single Piece Jet, Red (110 L/h) 180°

Micro spray jets water garden beds and landscaped areas with quarter-circle, half-circle, full-circle, strip or mist patterns. Antelco single-piece jets have a winged base for hand installation; the two-piece strip and mist jets use removable snap-ring caps.

Antelco single-piece jets use colour-coded nozzles. At 100kPa, blue delivers 35L/h, green 64L/h, black 84L/h and red 93L/h. The spray pattern determines whether the published coverage is a full-circle diameter or a part-circle radius.

The blue-base strip jet directs water into two opposing 20° strips for narrow garden beds. The yellow-base mist jet produces fine droplets for greenhouse misting and hanging baskets. At 100kPa, their published outputs are 35L/h and 20L/h respectively.

Brass 12° sprays and HR black standard-flow and green low-flow jets offer 90°, 180° and 360° patterns. Their nozzle and performance specifications are separate from the Antelco models.

Antelco Single Piece Micro Jet Specifications
Antelco Two Piece Micro Jet Specifications

✓ Antelco Single-Piece Jets
90°, 180° and 360° patterns.
4mm male quick-thread inlet; winged base; UV stabilised acetal.
Height: 22mm. Width: 12mm. Approximate weight: 0.6g.

✓ Single-Piece Flow & Coverage
Flow and coverage vary with water pressure.
Blue 1.0mm nozzle:
50kPa: 24 litres per hour; 360° diameter 1.6m; 180° radius 0.8m; 90° radius 1.1m.
100kPa: 35 litres per hour; 360° diameter 2m; 180° radius 1m; 90° radius 1.4m.
150kPa: 43 litres per hour; 360° diameter 2.4m; 180° radius 1.2m; 90° radius 1.7m.

Green 1.35mm nozzle:
50kPa: 44 litres per hour; 360° diameter 2m; 180° radius 1m; 90° radius 1.3m.
100kPa: 64 litres per hour; 360° diameter 2.4m; 180° radius 1.2m; 90° radius 1.6m.
150kPa: 80 litres per hour; 360° diameter 2.8m; 180° radius 1.5m; 90° radius 1.9m.

Black 1.55mm nozzle:
50kPa: 55 litres per hour; 360° diameter 2.4m; 180° radius 1.2m; 90° radius 1.6m.
100kPa: 84 litres per hour; 360° diameter 2.8m; 180° radius 1.5m; 90° radius 1.9m.
150kPa: 99 litres per hour; 360° diameter 3.2m; 180° radius 1.8m; 90° radius 2.2m.

Red 1.75mm nozzle:
50kPa: 65 litres per hour; 360° diameter 2.5m; 180° radius 1.4m; 90° radius 1.8m.
100kPa: 93 litres per hour; 360° diameter 3m; 180° radius 1.7m; 90° radius 2.1m.
150kPa: 115 litres per hour; 360° diameter 3.4m; 180° radius 2m; 90° radius 2.4m.

✓ Antelco Strip Jet
Blue 1.0mm base with black snap-ring cap.
Two opposing 20° strips; 4mm male quick-thread inlet.
At 100kPa: 35 litres per hour; approximately 4.8m end-to-end coverage.

✓ Antelco Mist Jet
Yellow 0.36mm base with black snap-ring cap.
360° mist; 4mm male quick-thread inlet.
At 100kPa: 20 litres per hour; approximately 0.8m diameter.

✓ HR Plastic & Brass Jets
Black standard-flow and green low-flow HR jets: 90°, 180° and 360° patterns.
Brass jets: 90°, 180° and 360° patterns with a 12° trajectory.

Video 1

Video 2

Recently viewed