Plastic impact sprinklers for gardens, crops and agricultural irrigation. Full-circle models water all the way around the sprinkler; adjustable models let you limit watering to a selected part of the surrounding area.
An impact sprinkler uses the water stream to drive a spring-loaded arm, turning the sprinkler in steps as it waters.
11–14m radius across the listed configurations. Coverage and flow vary with nozzle size, pressure and adjustment. Use the performance chart when selecting sprinkler spacing.
The models are supplied with the nozzle configurations shown in the specifications.
The spray arc is how far around the sprinkler the water sprays. On the VYR-802 and VYR-66, move the two stop clips around the base to set where the sprinkler reverses. Check the sweep while watering and reposition the clips as needed. The VYR-37 and stocked D-Net 8550 are fixed full-circle models.
Narrowing the arc concentrates the same flow over a smaller area, increasing the watering rate. Match nozzle flow, arc and spacing when combining sprinklers on one zone to avoid uneven watering. Changing nozzle size can also change the watering distance.
For models with a 15mm or 20mm male inlet, use an impact sprinkler coupling to leave room for the moving parts that extend below the sprinkler’s threaded inlet. Sold separately.
15mm Part Circle VYR-802 Specifications
20mm Full Circle VYR-37 Specifications
20mm Part Circle VYR-66 Specifications
15mm Full Circle Netafim D-Net 8550 Specifications
