The Hunter X-Core 8 Station Outdoor Controller provides local dial and button control for residential and light commercial irrigation. It has 8 fixed station outputs for separate watering zones, plus a P/MV output for a master valve or pump start relay. Station capacity cannot be increased with expansion modules.
Outdoor models have a plastic wall-mount enclosure with a built-in key lock.
The X-Core provides 3 independent programs with 4 start times per program and station run times from 1 minute to 4 hours. Scheduling options include days of the week, odd/even dates and interval watering.
Seasonal adjustment changes watering duration by percentage. Cycle and Soak splits watering into shorter cycles with soak periods, while delay between stations allows time for slow-closing valves or pump recharge. Manual watering and programmable rain off provide further control.
Optional Hunter Solar Sync provides weather-based run-time adjustment. Suitable Clik sensors, including Soil-Clik, and Hunter ROAM or ROAM LR remotes are also compatible through the relevant connections. Use Residential mode on the ROAM LR handheld remote with X-Core.
QuickCheck and short-circuit protection help identify wiring faults. Non-volatile memory retains programming, the CR2032 battery maintains the clock, and Easy Retrieve saves a schedule backup. AC power is required to operate the valves.
2 Year Hunter Warranty.
Hunter X-Core Quick Start Guide
Hunter X-Core Specifications
Hunter X-Core Door Card
Hunter X-Core Hidden Features Card
How watering programs work
The X-Core has three separate watering programs, labelled A, B and C. Each program is its own watering schedule, with separate watering days, start times and station run times. Choose days of the week, odd/even dates or an interval between watering days.
Each station controls a watering zone, such as a lawn or garden bed. Within each program, select the stations to water and set how long each one runs. Station run times range from 1 minute to 4 hours.
Each program allows up to four start times on its selected watering days. Each start time begins the whole program, watering its stations one after another for their set run times.
For example, Program A could start at 6am, water the lawn for 10 minutes, then water a garden bed for 5 minutes. That needs one start time. Add another start time to repeat the same sequence later that day. Programs B and C can have their own schedules. Use only the programs and start times you need.
Avoiding common programming mistakes
- Avoid unintended repeat cycles. One start time runs the whole program. Each additional start repeats it. Set unused start times to OFF. You do not need a separate start time for each station.
- Check all programs. A station included in more than one active program can water again under each schedule. Keep it in multiple programs only when that extra watering is intended.
- Space start times for the whole cycle. Allow time for the complete watering cycle, including all stations and any programmed delays, before scheduling another start.
Video 1
Video 2
Video 3
Video 4