Hunter X-Core indoor controller showing display and dial
Hunter X-Core indoor controller showing display and dial
Hunter X-Core indoor controller with terminal cover removed
Hunter X-Core indoor controller with terminal cover removed
Hunter X-Core indoor controller showing display and dial
Hunter X-Core indoor controller with terminal cover removed

HUNTER X-CORE RESIDENTIAL INDOOR CONTROLLER 6 STATION

The Hunter X-Core 6 Station Indoor Controller provides automatic watering for up to 6 zones in residential garden reticulation and light commercial systems. Designed for dry, protected indoor installation, it uses a dial and buttons to set separate watering schedules for lawns, garden beds and other zones.

✓ 6 Fixed Stations with Separate Pump / Master-Valve Output
✓ 3 Programs with 4 Start Times per Program
✓ Station Run Times from 1 Minute to 4 Hours
✓ Dry, Protected Indoor Installation Only
✓ 2 Year Hunter Warranty
✓ Seasonal Adjustment & Cycle and Soak

Hunter X-Core Quick Start Guide
Hunter X-Core Specifications
Hunter X-Core Door Card
Hunter X-Core Hidden Features Card

Hunter X-Core indoor controller showing display and dial

The Hunter X-Core 6 Station Indoor Controller provides local dial and button control for residential and light commercial irrigation. It has 6 fixed station outputs for separate watering zones, plus a P/MV output for a master valve or pump start relay. Station capacity cannot be increased with expansion modules.

Install indoor models in a dry, protected indoor location, away from UV light, rain, moisture and weather.

The X-Core provides 3 independent programs with 4 start times per program and station run times from 1 minute to 4 hours. Scheduling options include days of the week, odd/even dates and interval watering.

Seasonal adjustment changes watering duration by percentage. Cycle and Soak splits watering into shorter cycles with soak periods, while delay between stations allows time for slow-closing valves or pump recharge. Manual watering and programmable rain off provide further control.

Optional Hunter Solar Sync provides weather-based run-time adjustment. Suitable Clik sensors, including Soil-Clik, and Hunter ROAM or ROAM LR remotes are also compatible through the relevant connections. Use Residential mode on the ROAM LR handheld remote with X-Core.

QuickCheck and short-circuit protection help identify wiring faults. Non-volatile memory retains programming, the CR2032 battery maintains the clock, and Easy Retrieve saves a schedule backup. AC power is required to operate the valves.

2 Year Hunter Warranty.

Hunter X-Core Quick Start Guide
Hunter X-Core Specifications
Hunter X-Core Door Card
Hunter X-Core Hidden Features Card

How watering programs work

The X-Core has three separate watering programs, labelled A, B and C. Each program is its own watering schedule, with separate watering days, start times and station run times. Choose days of the week, odd/even dates or an interval between watering days.

Each station controls a watering zone, such as a lawn or garden bed. Within each program, select the stations to water and set how long each one runs. Station run times range from 1 minute to 4 hours.

Each program allows up to four start times on its selected watering days. Each start time begins the whole program, watering its stations one after another for their set run times.

For example, Program A could start at 6am, water the lawn for 10 minutes, then water a garden bed for 5 minutes. That needs one start time. Add another start time to repeat the same sequence later that day. Programs B and C can have their own schedules. Use only the programs and start times you need.

Avoiding common programming mistakes

  • Avoid unintended repeat cycles. One start time runs the whole program. Each additional start repeats it. Set unused start times to OFF. You do not need a separate start time for each station.
  • Check all programs. A station included in more than one active program can water again under each schedule. Keep it in multiple programs only when that extra watering is intended.
  • Space start times for the whole cycle. Allow time for the complete watering cycle, including all stations and any programmed delays, before scheduling another start.
✓ Application
Automatic control of residential garden reticulation and light commercial irrigation systems.

✓ Warranty
2 Year Hunter Warranty.

✓ Model Specifications
Model: Hunter X-Core 6 Station Indoor Controller.
Manufacturer Stock Code: HI-XC601IA
Station Capacity: 6 fixed station outputs. Station expansion modules are not supported.
Pump / Master Valve: Separate P/MV output for a master valve or pump start relay.

✓ Programming & Watering Schedules
Programs: 3 independent programs.
Start Times: 4 per program.
Station Run Time: 1 minute to 4 hours.
Watering Days: Day-of-week, odd/even dates or interval watering.
Seasonal Adjustment: 10% to 150%.
Other Timing Functions: Cycle and Soak, delay between stations and programmable rain off.
Simplified Display: Hide Programs setting can display one program and one start time.

✓ Manual Operation
Manual Watering: Single station, manual program, and one-touch start and advance.

✓ Control & Connectivity
Local Control: Dial and buttons for programming and manual operation.

✓ Sensors & System Control
Sensor Inputs: 1.
Compatible Sensors: Hunter Solar Sync for weather-based run-time adjustment. Suitable Clik sensors including Soil-Clik.
Optional Sensors: Required for the relevant sensor-based function. Select a compatible sensor for the application.

✓ Remote Compatibility
Handheld Remotes: Compatible with Hunter ROAM and ROAM LR, using the appropriate SmartPort connection.
ROAM LR Setting: Residential mode is required with X-Core.

✓ Installation & Construction
Installation: Dry, protected indoor wall mounting only.
Exposure: Protect from UV light, including reflected UV, rain, moisture and weather. UV exposure can discolour the plastic and may affect warranty.
Compliance: RCM approved.

✓ Power Supply & Valve Outputs
Operating Supply: AC power through an external 24VAC transformer.
Transformer Output: 24VAC, 1A.
Station Output: 24VAC, 0.56A.
P/MV Output: 24VAC, 0.28A.
Valve Type: Compatible 24VAC irrigation solenoids.

✓ Memory, Diagnostics & Protection
Schedule Retention: Non-volatile memory retains irrigation programming during power outages.
Clock Backup: CR2032 3V lithium battery maintains the current time and day. It does not operate irrigation valves.
Schedule Backup: Easy Retrieve saves a backup of controller scheduling and setup.
Diagnostics: QuickCheck wiring diagnostics and short-circuit protection.

✓ Dimensions & Weight
Dimensions: Approximately height 165mm x width 146mm x depth 51mm.

Video 1

Video 2

Video 3

Video 4

Recently viewed