Hep2O/Waterlink Push Fit x Copper Connector, 22mm x 20mm Copper
Hep2O/Waterlink Push Fit x Copper Connector, 22mm x 20mm Copper
Hep2O/Waterlink Push Fit x Copper Connector, 22mm x 20mm Copper
Hep2O/Waterlink Push Fit x Copper Connector, 22mm x 20mm Copper
Hep2O/Waterlink Push Fit x Copper Connector, 22mm x 20mm Copper
Hep2O/Waterlink Push Fit x Copper Connector, 22mm x 20mm Copper
Hep2O/Waterlink Push Fit x Copper Connector, 22mm x 20mm Copper
Hep2O/Waterlink Push Fit x Copper Connector, 22mm x 20mm Copper

HEP2O / WATERLINK PUSH FIT X COPPER CONNECTOR 22MM X 20MM COPPER

HEP2O / WaterLink push fit x copper connector for joining compatible 22mm polybutylene pipe to 20mm copper pipe in hot and cold water plumbing installations.

✓ 22mm PB x 20mm Copper Connector
✓ Push Fit PB x Copper Connection
✓ Suits HEP2O / WaterLink Pipe Systems
✓ Connects Polybutylene Pipe to Copper Pipe
✓ Hot and Cold Water Reticulation
✓ Support Sleeve Required for PB Pipe Connection

Hep2O / Waterlink Fitting Installation Guide and Specifications

More Information
Product Specifications
Hep2O/Waterlink Push Fit x Copper Connector, 22mm x 20mm Copper
HEP2O / WATERLINK PUSH FIT X COPPER CONNECTOR 22MM X 20MM COPPER
Hep2O/Waterlink Push Fit x Copper Connector, 18mm x 15mm Copper
Hep2O/Waterlink Push Fit x Copper Connector, 18mm x 15mm Copper CRH2OPFCC1812
$6.63 /each
Hep2O/Waterlink Push Fit x Copper Connector, 22mm x 20mm Copper
Hep2O/Waterlink Push Fit x Copper Connector, 22mm x 20mm Copper CRH2OPFCC2220
$8.60 /each

HEP2O / WaterLink push fit x copper connector 22mm x 20mm copper is used to connect compatible 22mm polybutylene pipe to 20mm copper pipe in hot and cold water plumbing installations. It is suitable where a HEP2O / WaterLink PB pipe run needs to transition to copper pipework.

This connector is part of the HEP2O / WaterLink push-fit plumbing system and is listed as HEP3.22.20 in the Hep2O catalogue and WLP3.22.20 in the WaterLink catalogue. Support sleeves are required when connecting polybutylene pipe. Confirm PB pipe size, copper pipe size and system suitability before ordering.

Hep2O / Waterlink Fitting Installation Guide and Specifications

✓ Product Type & Size
HEP2O / WaterLink push fit x copper connector, 22mm PB x 20mm copper.

✓ Connection
Push-fit PB pipe connection x copper pipe connection.

✓ PB Pipe Connection
22mm push-fit connection for compatible polybutylene pipe.

✓ Copper Pipe Connection
20mm copper pipe connection.

✓ System Compatibility
Suitable for compatible HEP2O / WaterLink polybutylene pipe systems.

✓ Catalogue Reference
Listed as HEP3.22.20 in the Hep2O catalogue and WLP3.22.20 in the WaterLink catalogue.

✓ Application
Suitable for hot and cold water plumbing installations where the PB pipe size, copper pipe size, pressure rating and temperature rating suit the installation.

✓ Support Sleeve Requirement
Support sleeves are required when connecting polybutylene pipe.

✓ Installation Note
Use purpose-designed pipe cutters, ensure the PB pipe end is clean and free from burrs, insert the correct support sleeve, push the pipe fully into the fitting and tug back to confirm the grab ring has engaged. Copper pipe must be cut cleanly and prepared correctly before jointing.

✓ Compliance Note
Install in accordance with AS/NZS 3500 and relevant local plumbing requirements.

You may also like

Recently viewed