PVC DWV Side Access Junction 45° FF L.H. 100mm is used to connect a branch pipe into a matching main PVC DWV pipe run at a 45° angle while providing access to the inside of a line.
The junction has three female sockets. Two sockets continue the main line, while the third socket connects the branch pipe. All three sockets fit over 100mm PVC DWV pipe with an approximately 110mm outside diameter.
An access cap positioned on the left-hand side of the fitting can be removed for inspection, cleaning or clearing and refitted afterward.
All three sockets are joined using PVC priming fluid and suitable non-pressure PVC solvent cement. This joining method is known as a solvent weld joint, or SWJ.
The stated 100mm size is nominal and does not equal the measured pipe outside diameter. Please confirm that the pipe has an approximately 110mm outside diameter and that a left-hand access configuration is required before ordering.
PVC DWV pipe and fittings are suitable for use in stormwater, sewerage, wastewater, vent, and other non-pressure applications.
