PVC DWV Junction I.O. FF 88° 50mm is used to connect a branch pipe into a matching main PVC DWV pipe run at an 88° angle while providing a capped inspection point in the line.
The junction has three female sockets. Two sockets continue the main line, while the third socket connects the branch pipe. All three sockets fit over 50mm PVC DWV pipe with an approximately 56mm outside diameter.
The inspection opening is built into the junction. Its cap can be removed when the pipework needs to be inspected, tested or maintained, then refitted afterward.
All three sockets are joined using PVC priming fluid and suitable non-pressure PVC solvent cement. This joining method is known as a solvent weld joint, or SWJ.
The stated 50mm size is nominal and does not equal the measured pipe outside diameter. Please confirm that the pipe has an approximately 56mm outside diameter before ordering.
PVC DWV pipe and fittings are suitable for use in stormwater, sewerage, wastewater, vent, and other non-pressure applications.
