PVC DWV I.O. Bend FF 88° 40mm is used to create an 88° change in direction in matching PVC DWV pipework while providing a capped inspection point in the line.
Both female sockets fit over 40mm PVC DWV pipe with an approximately 43mm outside diameter. The inspection outlet is built into the bend and can be opened when the pipework needs to be inspected, tested or maintained, then closed again afterward.
Both sockets are joined using PVC priming fluid and suitable non-pressure PVC solvent cement. This joining method is known as a solvent weld joint, or SWJ.
The stated 40mm size is nominal and does not equal the measured pipe outside diameter. Please confirm that the pipe has an approximately 43mm outside diameter before ordering.
PVC DWV pipe and fittings are suitable for use in stormwater, sewerage, wastewater, vent, and other non-pressure applications.
